FN P90 AEG Submachine Gun [Cybergun]

The product I received is excellent.
I can feel that it has undergone a high level of product inspection and has been well inspected.
I can feel the smooth operation of the gears.
The delivery period from Poland to Hungary was very fast, even considering the holidays in between.

Product arrived on time.
Excellent packaging.
I was pleasantly surprised by the workmanship of the AEG. Upper completely in metal, the plastics have a good finish, quick extraction of the spring and a compartment large enough for the batteries.
I don't like the battery cables, which are quite hard, and the Tamya connector, I would have preferred a Din connector. Haven't had the chance to test the AEG in Game yet but I hope to do so soon.

I recently picked up the Cybergun P90 from Taiwangun, and it’s an outstanding platform, both stock and for upgrades. Out of the box, the externals are impressive. The polymer body closely replicates the real steel version, making it lightweight yet durable. The compact bullpup design makes it ideal for CQB, but with some tuning, it performs exceptionally well in outdoor skirmishes too.

Internally, the P90 features a standard V6 gearbox, which is a great base for upgrades. The stock internals are reliable, but for players looking to push performance, this platform offers plenty of potential. The gearbox comes with metal gears and a decent motor, though swapping to a high-torque motor can noticeably improve trigger response and rate of fire. The cylinder setup provides consistent air seal, but pairing it with an upgraded piston head and nozzle will further enhance compression.

For accuracy, the adjustable hop-up unit works well, but upgrading to a rotary-style hop-up chamber (like the one by ProWin) will provide finer adjustments. I’d also recommend switching out the stock inner barrel for a precision barrel (6.03mm or 6.01mm) and pairing it with a high-quality bucking like the Maple Leaf Macaron for better range and accuracy.

If you're into LiPo batteries, the P90 can easily handle 11.1V LiPo with a MOSFET upgrade to protect the trigger contacts. I’ve also found that installing a Perun V6 MOSFET allows for programmable features like pre-cocking and burst fire modes, which are great for adapting the gun to different playstyles.

Taiwangun did a fantastic job with shipping and packaging. The gun arrived in perfect condition and on time. Overall, the Cybergun P90 is an excellent buy for those looking for a high-performance AEG with a ton of upgrade potential. Whether stock or fully customized, this P90 delivers the fun factor .

Elképesztő minőség, nem recseg, nem ropog. Anyaghasználat 5 csillag. Out of box extrém pontos, motornak jó hangja van. Hop-up viszont rögtön cserés de ez úgyis alap egy új replikánál. Tár győnyőrű, nincs adagolási probléma eddig. Összességében bárkinek merem ajánlani. Nagyon kényelmes a használata. Második replikának vettem de lehet, hogy trónfosztás lesz a vége :D

Things that impressed me:
- The upper, which holds the barrel & hop-up is all metal. Feels really sturdy.
- Decent accuracy out-of-the-box, hitting targets at 30m/100ft easily.
- Very compact gun, really easy to peak around corners, but the longer barrel allows for good accuracy in a compact package (being a bull-up).
- Access to the Gearbox is really easy. It was a very nice surprise that the gearbox has a quick-change spring system. It's great for quickly changing the spring and being able to easily adapt the replica for outdoor/indoor/CQB games.
- The gearbox is very solid, the components are quite nice for the price.
- Its a good platform for modding. Being TM specced, plenty of nice stuff available.

Overall and all, it's a really good deal for the money.

The only thing I didn't like so much was the trigger pull, which is very long, although this is a characteristic of bull-up replicas.

I strongly recommend installing a mosfet in the replica, both to improve the rate of fire/trigger pull feel, also to save the trigger contacts from burning out.

I really want to love the P90, its exceptional value for the money, its easy to work on, I upgrades the barrel, motor and hop rubber and it shoots really nicely, the only issue I have is that the bloody hop moves by itself and after being nicely dialed in, it then shoots "droopies". Which is a shame because I had it shooting beautifully, OK, trigger response isnt great but its a P-90. Would definitely recommend getting this gun.

Wonderfull value for the price,
The gun is very well made, as far as I now thery is no other gun as easy to disassemble as this one.
It's compact format is great for CCB, but I use it almost anywhere.
The gearbox has a fast spring change system.
It only needs a simple FET and 2 high-cap magazines, and nobody stops you. :)

Best value for the price, to me it was a bargain.
It's strong, and does with any problem what was made to do, and do it well.
You don't need anything more, unless you have a very heavy or large sight.

ho chiesto di abbassare gli FPS di partenza. adesso esce a 0,87j. senza aggiunta di pezzi o modifiche varie, è preciso come arma, a raffica tiene la testa alta davanti alle altre repliche customizzate.
unica cosa, non capisco se è dovuto al difetto della replica o perche è stato aperto ma, a raffica la risposta è rapida mentre a singolo ci devo andare fino la fine della corsa del grilletto... non dovrebbe fare cosi... ma una volta che si abitua manco si fa caso. adesso valuto di fare upgrade della meccanica. vediamo come andrà a finire :) in ogni caso consiglio! cqb o bosco, trita tutti!

Totally okay for the price.
Very high fire rate with 11.1 Lipo
A good option for CQB.
Recommend Vicoptics IPM 1x23x34 Red Dot, you can get a very good accuracy.
Tried with a Holo sight, but couldn't lower the dot enough

Not sure if it was because min was broken, but the trigger had a really slow reaction time. It felt like playing Counter Strike with lag. Otherwise I was really looking forward to playing with the weapon.

Looks great! I am very satisfied. I was very happy to see how strong it shoots and the range of this weapon is not bad for a MP.
I was just confused why my ammo was already open and all the balls were spread out in the whole pakage.

Great little gun for the price. Exceeded my expectation. The only issue I had was that the charger it came with was not standard for the US. So make sure to read the fine print, lol. That being said a 8 dollar conversion kit fixed that issue.

This product looks and feels great! It has performed flawlessly so far. Spring swap was perfect for CQB! Feels a lot better than other P90 types I have used before. Markings are a nice touch as well. CYMA quilty with a great look!

This is a super little gun, out of the box it was chronoing at 3.10fps, prefect for my site, decent ROF, the finish of the gun is really nice, weight is deffo on the heavy side for the size of the gun, front end is metal and the lower receiver is abs.. I am running this without any issues with the stock battery, I have put a few high cap CYMA mags without any problems...

I did replace the stock hop up rubber as no amount of re-seating it would make it shoot straight or function properly at range, both the range and accuracy is as good as my other guns with longer tighter barrel setups .. So a minor complaint. Overall I love this gun.

The gun works fine but it was shipped with a dead battery/charger so i needed to replace the battery first hand to use it. Now its working with a 7,4V Li-on and with a costume charger. Oh and the speed loader was a good quality one not like the one i ordered from this site :P

very comfortable to hold, has 3 mountings 2 on each side and one long on the top at first it was a bit hard to insert the battery becuase of space but after some tries it wasnt really a problem, the magazine feeds fine and the fake ammunition is cool if you are looking for a good non gas p90 i recommned it

Looks and feels great, the plastic lower feels really thick with barely any flex and the upper and and top rail is a nice sturdy feeling metal. The flash hider on mine was actually metal when I was expecting plastic so that's a plus. Only real downside is that the included charger was a European model so if your in the states don't forget to buy a charger with US connectors.

The cybergun (cyma) FN p90 is a fun weapon to play with. Very nicely and realistically made. Comes in a nice box with quick charger, barrel stick, mag and spring.
The weapon's hop-up is very easy to adjust.
Personally, I wouldn't really recommend the replica for outdoor play because of it doesn't shoot that far. For indoor in small spaces, though, it is perfect.
I had also bought a silencer with it but it is not really installable because of the muzzle cannot be removed without causing damage. That is a pity.
But overall a very nice replica.

Played a couple of skirms with this P90 (indoor and outdoors) and had a lot of fun with it. For 130 euros its a great replica, it shoots fine straight out of the box and even with iron sights you can shoot your enemies perfectly at about 35-40 meters away

I love this Gun.
But :) you will need to upgrade the internals in the long run.
Out of the box it shoots great. The Body is solid (some flexing on the front but minimal).
Motor is not very good. Shimming with the stock bushings is impossible (you need to buy shs or similar bushings that are 2,5mm height not 3mm like stock ones to be able to shim this bad Boy). Piston is with one metal tooth and the piston O-ring is not good.
Air seal inside the gearbox is terrible - Somehow it shoots strong anyway.
I upgraded the barrel, hop up rubber, nozzle cylinder head, piston, piston head and tappet plate now the air seal is very good. New 13:1 cyma short stroke gears (you will need a stronger spring - m120-m130 with short stroke gears ). Stock spring length is 15cm I fittet a 17cm one but maybe 15cm would be better.
Im going to buy high torque motor a perun Mosfet and finsih the upgrading but the cost is going threw the roof - its ok :)
All in all the gun is great! I love the ease of teching on the v6 gearbox so much.
I bought a new battery - Dimensions that fit good are 105x34x15 +/-2mm
I love holding it before I go to bed :D

A very nice and compact PDW! I like it alot! Got it mine for vehicle operated task. I've set it up with a reddot. Couldn't find a sling dedicated for model P90 yet. I will use it as it is, and because it is not fitted with mosfet/etu, when will show signs of wear will be upgrade with mosfet, a new barrell, hop up rubber ...

This is a little real mean machine... 440 FPS with 0.2 BB's, ~350 FPS with hop set and 0.28 Devil Blaster BB - chrono with same CORTECH X3200. Accuracy is impressive for this little replica, and consistency you get it after 3-400 BB's shot through and barrel cleaning.

Small footprint, goes just fine into a medium size backpack, pretty powerful, fairly accurate.
Noisy only when dry fire, which I would not recommend to do it if unnecessary.

Supplied 9.6 volts battery in a package is a hassle to fit in, I didn't want to damage the wires and currently using the replica with a 8.4 NiMh battery. 9.6 one landed in a replica with a bigger battery space.
Metal sights hard to use, need a red dot for optimal results

- Very well put together replica.
- Great range and grouping and very nice sound on full auto.
- Very light and easily maneuvrable.
- Great quick reaction firing (non sighted/half raised)
- 400 FPS average on single and around 390~405 on full auto.
All in all once again an amazing replica from Cyma and great for low budget players, and great service from the guys and girls at TaiwanGun.

- Great range and grouping. (40 m A4 paper target single fire 8/10 bb hit / full auto 10/20 ish hit(.25 bb used))
- Very nice sound on full auto.
- Hop up unit is doing it's job great, this replica can lift .36 bb.

- Upon unboxing I had maybe just a bit of an issue with the inner barrel as it was twisted slightly to the right (the hop up nub was not fully visible) but it was easily fixable.
- Very loud. I know I said it's got very nice sound but it's also very loud :)) (the body really acts as a acoustic amplifier)

Battery, that is useless. So get a 7.4v lipo
Or insert a mosfet and go for the 11.1 v lipo.
A nice good looking gun, fits nice in your hands, like holding a baby.
1 mid cap mag (65bb), you need to buy more mags

Small
Light
Nice ROF
Good range
Special looks as it isn't a m4 /ak47

Comes in a little hot at 410 fps
Give it a m85 spring and your around 330 fps. Mine got a m80 and it's 310fps
I'm no fan of cutting a spring, I rather buy a new one.
No quick spring, so you need to take it apart or let the techs at Taiwangun do it.
Could use some more sound insulation as the housing is acting as a soundbox.