Licensed FN P90 Replica with Eshooter ETU, GEN-2 [EMG]

The licensed FN P90 submachine gun replica from Cyma Platinum is an electric AEG featuring FN HERSTAL markings and the distinctive bullpup layout. The replica uses an integrated red dot sight, a V6 gearbox with a quick spring change system, and a Kestrel P90 MOSFET, supporting convenient operation, muzzle velocity configuration, and fast cycling of the mechanism.

Construction and design

The body of the FN P90 replica is made of polymer, while the barrel and receiver assembly and the bolt assembly are made of metal, maintaining the characteristic construction of the P90.

The replica is manufactured under licence from FN HERSTAL. An individual serial number is located on the upper receiver.

The included 70-round mid-cap magazines feature imitation cartridges that complement the appearance of the replica.

Ergonomics and operation

The FN P90 uses the fully symmetrical construction characteristic of this platform. Its layout enables convenient operation by both right- and left-handed users without requiring the configuration to be adapted to the dominant hand.

The bullpup layout positions the gearbox and magazine behind the grip, allowing the replica to retain a 260 mm inner barrel within a compact body. The battery compartment is located in the stock.

Integrated red dot sight

The FN P90 is equipped with an integrated red dot sight positioned on top of the replica. This allows the user to aim with a red dot without installing a separate optical sight.

Internal components and mechanism

The replica uses a V6 gearbox with a quick spring change system located inside the gearbox. The factory muzzle velocity is ~390 FPS.

The mechanism uses CNC-machined 13:1 gears in a short-stroke configuration, 8 mm ball bearings, and a piston with full metal teeth. The drive system is powered by a short-type neodymium high-torque motor.

The steel type 2 cylinder works with a flat, offset aluminium cylinder head and a 20.95 mm Teflon nozzle fitted with an O-ring.

Electronic system

The replica uses a Kestrel P90 MOSFET and a T-connect connector. The electronic system supports control of the mechanism at a rate of fire of ~28 RPS.

Hop-up and inner barrel

The polymer rotary P90-type hop-up chamber enables adjustment of the BB spin. The replica is equipped with a brass inner barrel measuring 260 mm in length and 6.03 mm in diameter.

The outer barrel features a 14 mm CCW thread, allowing the installation of muzzle devices using this standard.

Included

• FN P90 replica
• 2 70-round mid-cap magazines
• BB speedloader

Recommended accessories

• 70-round mid-cap magazine: 100rd P90 Mid-Cap magazine [Fuxing]
• 11.1 V battery: Battery Li-Po 1100mAh 11,1V 20C - Deans [IPower]
• 7.4 V battery: Battery Li-Po 1100mAh 7,4V 15/30C - Deans [VB]

Manufacturer

CYMA Platinum offers licensed airsoft replicas featuring markings from firearm manufacturers. The FN P90 model is licensed by FN HERSTAL and combines its distinctive symmetrical bullpup design with an integrated red dot sight and a V6 gearbox.
Each replica undergoes a zero-stage inspection! It is checked and test-fired using an XCORTECH X3200 chronograph.