[Set] MP5K PDW Stock [CYMA] + PDW Stock Extension for battery [CYMA]

The CYMA PDW Stock Extension for battery is a clever solution for players who love the compact look of the PDW stock but need extra battery space. The extension adds just enough room to fit small stick or brick Li-Po batteries, though installation can be a bit fiddly — cables sometimes get in the way, and the end cap needs to be screwed on carefully at specific angles to seat properly. Once fitted, however, it feels solid and secure with no wobble. If you’re a fan of the PDW stock’s style and handling, this extension is a wise, practical upgrade that maintains the sleek design while improving functionality.

I don't know how I'll fill 200 characters for this to simply say that if you get one of the CYMA mp5 variants with the PDW stock, this is a must. I ordered it after reading reviews that battery space was limited and it was well worth. Battery fits without issue and is full metal. Very nice.

Very crisp and firm and no wobble. Have an old 0.41 pdw Mp5K and it fits perfekt!
My 0.41 is now CQC ready and is even more easy to handle in tight enviorments due to the stock.
Dont forget to add the lengthening tube if your battery is longer.

Have been using a CM041G for a long while now and fitting in a decent battery was tricky or I would have to use tape to keep everything secure.

This allows far more internal length for battery storage. It is a nice and sturdy feeling construction and looks good on my MP5.

Works with a JG MP5K as well. For most batteries you'll probably want to pick up the tube extender. It is possible to find batteries that will fit without the extender, but it'll limit you. For me: I just wanted to use the same 11.1 stock tube lipo's I already had. Built solidly and the replica is still short and easy to handle, even when you can't collapse the stock fully due to the tube extension.

I mean, it is a PDW extension. It is quite a bit shorter than I realized. I bought a CM.106 and that came with its own stock extension that was longer than this one.

I like it. If I have a battery that is just slightly longer than my stock I have a couple of options I can use now. There is a reason this extension is only in stock for a short time and now I know why.

Work well with the Sema MP five they make you put 200 characters on here for a review to be able to enter the contest so I’m just saying stuff now at this point because there’s really nothing else I really have to say about it other than it really works well Taiwan Gun is awesome and they give you good deals and that’s really all about I have to say about all of it

It's very good stock for MP5K replicas, little modification needed for fitting it to the jing gong MP5K replica. You can put the wiring of the replica and battery to the tube so you don't damage the wires with the stock butt plate if using stick batteries.

Excellente extension de crosse pour MP5 quasi toutes mes batteries passent avec, et sans tordre les câbles. Je recommande vivement. un petit coup de frein filet et j'y ai ajouter un joint torique au filet au niveau du capuchon et c nickel

Looks good and amazing quality.

Fits good and because of this item i can use a Titan lipo 3000 mag 11.4 volt .

And that means i can play non stop fore at least 2 days without changing battery

Pritty amazing

What can I say but this was a great addition/product for the CM.107 and CM. 107 Airsoft gun. It makes the gun look more balanced front to back. Without it the guns look too stubby and short in the rear. Other than looks this Buffer tube Extension also makes the for more space to store your guns battery. Now it will work and fit on the CM.041L but with that gun being short already, it may look too long in the back end. As these Airsoft guns are called "Replicas" having this Buffer tube extension on y guns make them look like the "Real Deal"!! This is another must have for you Airsoft Enthusiasts. Great addition to your GUN, I have it on my guns and it adds a level of realism to them that was not there before the buffer tube extension!

Rebuilt mij Cyma MP5K (CM41) into a CM41L with this stock ans some more parts . Looks great, works fine. All parts fit remarkable good.
Made my short MP5K into a great working and looking machinepistol.

This fit my cyma Mp5k perfectly without any filing or fitting issues at all. Build quality is excellent. A few things that I was unsure of that I can confirm now that I’ve received it and installed it..

- you are able to unscrew the middle section and this allows the stock to retract even shorter if that’s something that you wanted to do. This can shorten it about 2”.
-you can now finally rear wire your Mp5k and have a larger space (and much easier to access) for your battery!! I can confirm that my 11.1 lipo will fit, rear wire locate is pretty simple. I’m surprised that Taiwangun doesn’t advertise this feature.

Build quality is great, fitment is great - overall very happy to finally have this available. My only grip is regarding the shipping.. there was only one option for shipping and it was very expensive. The package arrived to Canada VERY quickly.. in fact, I got it before I got some parts I had ordered IN CANADA. If I had been in a hurry, having such fast shipping is AMAZING. My only suggestion to Taiwan gun would be to have a cheaper, slower shipping option as this may deter others from making a small order.

A really good product! Extreme in the quality and craftmanship. Fits my galaxy mp5k with small modifications. Some sharp edges that needed som filing. Won't break in a near future! Super happy with the purchase!

PDW stock for my Umarex MP5K.

Great fit on my Umarex MP5K. Very solid build. There is absolutely no wobble on the stock.

I knew it would fit my Umarex mp5k, but it you are trying to get it for an Umarex competition mp5 it might not work. The style is different. The other version of the pdw stock might work.