[Set] Licensed STACCATO 2011 XL pistol replica - Black [EMG] + VictOptics V3 1x22 Dovetail collimator sight - black [Vector Optics]

Brightness and size were great, the parallax not so much. Also the battery has a tendency to get loose when the scope is used on a GBB. Also the lens can be easily scratched even then the screws that come with the reticle.

Got two because at the time this was the cheapest red dot that would fit the mounting plates on two pistols and they exceeded my expectations. The glass is clearer than my JJ and TE pistol red dots both of which are more expensive than this one. Also on this one the dimmest setting is dimmer and the brightest setting is brighter. Both fit perfectly on the pistol plates I had. Haven't tried the 11mm mount so can't comment there. One has about 50 rounds and the other one over 200 on green gas blowback slides and no problem so far. The only thing not great is that instead of + and - buttons there is just one but that is just a minor inconvenience - you can turn it off at your preferred brightness with a long press and then it turns on back on that brightness so it is not that bad. The protective cap is rubber so if you have a rear sight behind, it is easy to cut a notch in the cap to fit. The linked products on this page also show the mounting plate geometry so you can double check if it is for your pistol or not - good job on TG for providing that.

Finding a high-quality red dot sight for a 11mm dovetail rail is often a frustrating task for airgun and rimfire enthusiasts. Most premium optics are designed exclusively for Picatinny systems, leaving those with classic dovetail mounts to rely on cheap, flimsy adapters or low-tier sights. However, the VictOptics V3 1x22 is a true diamond in the rough. It is one of the very few dedicated dovetail red dots that actually delivers professional-grade performance without the need for bulky converters.

The build quality is surprisingly robust, featuring a crisp 3 MOA dot with multiple brightness settings that remain visible even in bright daylight. The 22mm lens provides a clear, wide field of view, and the elevation and windage adjustments are tactile and precise. What sets this apart is how securely it locks onto the 11mm rail; there is zero wobble, and it holds zero perfectly even after repeated use. If you are tired of compromising with subpar optics just because of your rail type, this is the solution. It offers a sleek, low-profile design and reliable electronics, making it easily the best dovetail-ready red dot currently on the market.

Great gun, looks and feels awesome. looking forward to modding it over to HPA.
The shipping and handling was really fast. i got this one within 3 days across Europe.
Friendly customer service and good products in general.

It’s an amazing replica!

I have mine for a month now and it’s performing really good. I’ve been to three games with it and used it as a primary in cqb fields and it works great for that.

The only thing I found a bit disappointing is that the outer barrel wobbles pretty badly. But other than that the build quality is awesome and everything feels super nice on the replica.

I’m still unsure if it’s TM compatible or not but even if it’s not there should be other aftermarket parts for the weapon.

The tread marks are beautiful on the replica and the recoil also feels great. I can recommend it for everyone especially if they are a fan of staccato.

Great red dot mounted on my JAG Arms Sand Viper replica. Attention! It is sold in a kit with the R615-1 TTI sand viper pistol but the screws do not match! Luckily I found a couple at my hardware store and mounted them. For the rest, great sight complete with cover in case of non-use

Out of the box great performance.
I tested it out at home shooting on target, from 15-20 meters I was nailing all shots in a 300ml coke can. If you spam fire it than it will loose some accuracy due to the fact that hop-up rubber freezes and looses it's elasticity but still the spread is not that bad.

Pro:
Accurate
Beautifuly done - great quality
Feels great in hands
Has a nice kick to it, nothing crazy but feels good

Con:
- With the green gas i used it got 1.4J on crono
I will try diffrent ones and edit the review on a later date. For CQB you need less than 1J.
- fiber optics sights are a bit to large makes it difficult to find a compatible holster.
I had to cut mine up but I got lucky and it all good and i actually like how it looks now. But the fact it's higher then normal actualy makes it easier to aim so ... not sure if it is a con .. more of inconvinience regarding the holster.

I bought this reddot for my GBB pistol, an Army Armament R501 with custom mounting plate.
It is absolutely amazing, the lens is clear and the red dot is bright, perfectly usable even in daylight.

I also have a picattiny mount for it, it looks pretty sick on my M4.

The optic is very high quality made and sturdy, easy to use, with almost no parallax.

I can really recommend this reddot sight, TaiwanGun even sells mounts for it, it is a perfect sight to use over a scope, at 45°angle or even as a main optic.

The sight itself without a mount is only 28g heavy, it is very light.

If I'll need another compact sight I will definitely buy another one.