150rd Mid-Cap magazine for AK74/AK-105 - Black [CYMA]

Brilliant magazine from CYMA. Bought for use with my Specna Arms J series. It's quite lightweight (polymer body) but feels robust and sturdy in the hand. Feeds flawlessly and it actually fits in the mag well better than magazines that originally came with the replica! Bought 5 for an excellent price. Will buy more in the future if needed! Although I suspect these will last me a long while yet!

The product arrived in record time at its destination, a quality product, exactly as in the pictures and description! I recommend buying with confidence from this site... with each order I was surprised how quickly they arrived and always came exactly what I ordered!

Although they didn't fit in my E&L 702 custom, I believe it's not the mag's fault, but somehow my tech has put my hop up unit lower than usual because the problem was in a very specific spot that i cannot really explain

anyway, they work flawlessly after my modding to fit, as the should

The price is well justified. The magazines feel robust. I haven't had any problems with feeding so far. They attach nicely and don't wiggle around as much as some other magazines. The BB's inside don't shake around as much as well so that is a nice stealthy bonus.

Recommend!

one of the best mag for Ak74 style replicas !

Been using these for a couple of years NONE of them had misfeeds or incompatibility etc.

Used then on Cyma , Specna , E&L , Bolt replicas (some needed a bit of filling )

Chead , durable and lice looking ! there you have it

Does the job well enough. Feeds prefectly. There is a bit of side to side wobble as all other mags, but it is no problem for it to function correctly. Should have gotten more now that I think of it. Use it with a CYMA 0.40C

The Cyma AK74/AK-105 mid-cap magazines are a great choice for players who prefer reliable feeding and a realistic look. I purchased three of them, and with minimal home modifications, they fit perfectly into my Cyma 040C. Once adjusted, they perform consistently and are an excellent value for their price. Highly recommended for anyone using compatible AK replicas!

With this price point, I could say nothing bad. In most cases, it works pretty well. The magazine itself is lightweight and easy to carry. The overall quality is not as good as PTS magazine (much more expensive as well). When inserting CYMA AK, it has slight wobbling that could resolved by easily using electrical tape.

These mags are incredibly light weight, but not to the point where it feels like a toy. It does, however, make me question its durability a bit. Though for the price you pay for each mag, I honestly cant complain. I just wish it would sit a bit more snug like their drum mags do but over all, it works nicely. You might have to put a bit of electrical take under the back catch if you want to use it with an AirTac adapter like I am.

Durable polymer magazines that work perfectly with my CYMA AKs. Best paired with my polymer body AK-74, but I also use them with the AK Alfa as well. Reliability is excellent and they're easy to maintain.

Got these for an ICS AK-74M. They work great with no wobble. They fit as good as the oem hicap. However they feel slighty less quality compared to some of the older mags I've used. Get them in bulk and stock up! Everytime I order at least $200 worth of stuff to justify the shipping cost, and its still cheaper than shops in the U.S.

Hello.
I bought three of these for my E&L AK-105.
Better than the oroginal mags for more more less money. Also fits perfectly for Cyma aks too. Feeds good. No wobble. Not fragile. Good texture not shiney.
Recommended for cyma and e&l replicas.
Thank you very much.

Fit very well on cyma cm.76 very stable and good looking magazines. I take 5 of them and all are just perfect. I will ordre more when thay have in stock. Thanks for the good quality, price and fast shipping.
You are the best.

Its a plastic mag but its very solid (i dropped it several times). I recommend it. Its a simple mid cap magazine, nothing more. It can feed cyma guns without any issue (i had none).
Best for tactical ak's ad for who likes bakelite magazines.

Great mid cap mags they work as intended and I havn't had any trouble with them so far.
Ive been test fireing my ak with the mags and thats worked wonderfully plus I used them last weekend at a game without any touble

Lot of feeding issues whit these magazines...

the magazines did not feed, and if they did, they gave two bb's at once. The weapon was a Cyman AK47. A drum magazine has been used in the gun without any problems, so the problem is definitely in the magazines.

Short summary: must-have for an entry level magazine.

The magazine itself looks very real and is pleasant to hold in your hand. To my surprise, it was noticeably bigger, than an M4 mag. There aren't any bad seams or badly produced parts to it, everything is in it's place. I have used it already in a few games, and it's really sturdy and houses a *lot* of bbs. No malfunctions or misfeeds, all three magazines worked perfectly. On semi-auto fields it is almost not needed to reload more, than once per ten minutes of active gameplay, as it has half the capacity of a regular hi-cap mag. Another thing to note is that due to the curved shape of an AK mag it is tricky to get in a STANAG magazine pouch, but still possible.

Pros:
+ Good looks
+ Decent production quality
+ Very affordable price
+ Weight that balances perfectly with the manufacturer's guns

Cons:

- Is a little wobbly in a Cyma 048 (is fixable if tape is applied to inside of the gun itself)

In summary, I'd recommend it to anyone who doesn't want to spend much and still get a good magazine.

The mid cap mags of Cyma fit well in my CM.040. They feed well and haven’t led me down. They are sturdy and come with some heft, which is a good thing if you’re trying to look for realism. And for the price, it’s a bargain. Thanks Taiwangun!

Sturdy and with a clean finish, if you're on a budget it's more than enough to satisfy your BB-slinging desires.
On a note, it did fit snug in my LCT aks74u, tighter than the magazine it came with.
Must definitely buy more.

Great mags that just works, nothing fancy but a good mag. Bought a set of 5 mag that worked great in a muddy skirm where the have been used to the max. If any broke I would instantly by one again for the price

Low price, low quality, work for my friend´s cyma but wont feed arcturus. If you want some cheap but still good looking magazines and you have a cyma o any compatible replica I would buy this mags, no need to buy 20€ mags if you dont need them to be metal

After filing the front lip fits in my Arcturus AT-AK04. It wobbles slightly, but less than the Fuxing 170rd mag and its not problematic. The only downside is that plastic is noticeably thinner than other mags, but its price is pretty low, so it makes sense.

Pienamente soddisfatto del prodotto. Perfetto il funzionamento con Cyma AK74U. Sembrano essere molto migliorati sia come qualità costruttiva sia come tensione della molla interna. Qualità/prezzo imbattibile.

Classic Cyma magazine. Works great in both Cyma and LCT Ak replicas. When using for the first time be careful not to overfill it and possibly damage the spring.
other than that it should last you for a long time

No complaints. Works well with CYMA AKS74U CM.045 (I got the High-speed version, but that shouldn't make a difference), doesn't misfeed, very little wobble, and it's been dropped a few times but it's still kicking.

fits perfectly on my cyma and aps aks! for the ARCUTURUS AK05 you have to file down the upper part of the front lip, else the mag will get stuck (i broke 3 until i realised how to properly file them to fit perfectly) to prevent you from my experience, while filing, try to insert the mag, but dont push it in, until it slides in almost effortless :)

It's need a little filling on the front lip to be used for the replica ARCTURUS AK01, the magazine are very well made and solid.

Il faut limer un peu la lèvre avant pour qu'elle soit compatible avec la réplique ARCTURUS AK01, le magazine est vraiment bien fait et solide

They feel decent and surprisingly rugged for the price.
Had no issues with misfeeding and fits my LCT TX-S74UN perfectly. I'm using the LCT magwell spacer, your mileage may vary without.
Will definitely be ordering more.

I purchased this for my dboys ak74su and it fits perfectly, only with a little wobble in side direction but that doesn’t bother the feeding. Absolutely recommend it!

Fits perfectly in my CYMA AK105.

Works great, looks great. For the price it's a clear recommendation from me. It looks and feeds well in my LCT LCK-15 EBB.

As always with cyma their magazines are cheap, reliable and rigid.

The only thing I can complain about is the weight, I would like for it to have a bit more heft to it, but I suppose that's more of a personal opinion.

Fits my Lct EBB ak right out of the box, and feeds it just fine. Forget about lubricating the mags and other nonsense "break ins", just load 30-40 bb for the first time, repeat it with 50-60, after that you are set. For the price they are unbeatable.

Nice black magazine for cyma and jing gong aks. In the time might jam, but if you remove the plastic tip that push the bbs up, you can get more durability.
It looks better on aks 105, ak 74
This is the one “chambered” on 5,45 x 39

Jó árban van, de a minősége nem a legjobb és nem illeszkedik az Arcturus Centaur B-be. Reszelni kellett rajta, de így nagyon el van vékonyodva a hátsó akasztó.

-----------------------

Good price, but it's material is not the best and does not fit my Arcturus Centaur B. You have to modify the frontal and back hook, but the back hook with the modification became thin.

Bought a couple of these mags, since i dislike highcaps.
You get the cool AK74/5.45mm magazine look, but they are not made of durable material.

They are cheap, you can really buy a good bulk of these and not care if they break or get lost in the heat of battle.
Easy to change if you have spare magazine shells or highcaps you want to change to midcaps, just hammer out 2 pins and pull the whole inner magazine out, be in mind the bottom plate comes of too when doing this.

Shells break with ease, i had one mag i tried to load but the front anchor broke off, i didn't even pry it in, just did a standard reload.