Battery Li-Po 1200mAh 11,1V 20C - Deans [IPower]
Bestseller
Our price*:
$17.99
-
Forms of delivery
Choose country and enter zip code to see shipping costs.
-
Technical data
Manufacturer: IPower Code: IP-LIPO1200-11.1-TC EAN 6977520490335 Weight 90 g Accumulator type LiPo Accumulator connector type T-connerctor Accumulator cells type lithium Length 190 mm Width mm 17 Height mm 16 Maximum intensity of discharge power A 24 Accumulator voltage V 11.1 Accumulator capacitance mAh 1200 -
Reviews
Add review-
- 04.05.2026 wrote:The iPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a compact and reliable power source for airsoft AEG replicas. Designed as a 3S LiPo pack, it provides strong and consistent voltage output, which results in improved trigger response and a faster rate of fire compared to standard NiMH batteries.
In use, the 1200mAh capacity offers a good balance between size and runtime, typically lasting for a full skirmish depending on the rifle’s setup and firing style. Its slim stick design makes it ideal for tight battery compartments such as AK dust covers or buffer tubes in M4-style replicas.
The 20C discharge rate ensures stable current delivery, which helps maintain performance even during rapid firing. The pre-installed Deans (T-Plug) connector is also a strong advantage, as it reduces resistance and improves electrical efficiency compared to older connector types.
Overall, this iPower battery is a solid, affordable choice for players looking to upgrade to LiPo performance. It is especially suitable for intermediate users who want better responsiveness without sacrificing compatibility or reliability in the field. -
- 23.04.2026 wrote:Great and reliable battery that performs consistently and holds charge well during extended use. It fits AK replicas quite nicely and is actually more compact than expected, making installation easier in most setups. Compatible with brands like LCT, CYMA, and E&L, where it sits securely without modification. However, some gas tubes can interfere with proper placement. In particular, certain 3D-printed handguards tend to have a smaller gas block diameter, which can prevent the battery from fitting through. With standard handguards, though, it works very well and remains a dependable choice overall.
-
- 16.04.2026 wrote:A really nice battery. First perfectly in my LCT AK 105. I could use it for a whole day without charge. When you use a lot of full auto it will probably not last a whole day tho. No bad things to say about this battery.
-
- 25.03.2026 wrote:It holds energy well and releases it. It fits perfectly into the narrow battery holder of the Arctarus AK12. I also tested it on an Arctarus M4 CQB and it fits perfectly into the buttstock.Unlike other accumulators, there were no problems here during play because arctarus replicas are sometimes sensitive to the accumulator.
-
- 16.03.2026 wrote:Its a good battery for the price. I have another type of battery from this manufacturer and it does a very good job. This is powerful and its safe. You have that new type of T connector on in, it goes good with specna replicas.
-
- 19.05.2025 wrote:The IPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a great choice for airsoft. It delivers solid performance, providing reliable power for extended gameplay. Compact, durable, and easy to install. Highly recommended!
-
- 17.03.2025 wrote:perfect battery for ak use, fit with no problems and gives a new life to your replica. good quality connectors and eletrican wires. i got this for backup and ended up using it as a primary since i feel its faster to respond.
-
- 05.01.2025 wrote:It's a really good battery as a main or a back-up due to it's really slim design. It lasts a good bit and it's perfect for AK type replicas. I'll probably end up buying another one in the future just to keep in a bag when I'm in a long match. Buy 'em, they're great!
-
- 03.09.2024 wrote:
super accessory, I enjoy playing with it, the weapon it comes with is very accurate and strong, so far I am completely satisfied. The package arrived in perfect condition, within a very short time. I will order from here again, I am very satisfied. -
- 16.04.2024 wrote:It's the only battery I use for my Arcturus AT-AK05. It fits perfectly and has the best shape for the capacity for AK style airsoft replicas.
Careful when using 11.1V as it can damage weaker trigger internals. If you have a mosfet though, this is the way to go, makes the replica much snappier -
- 19.02.2024 wrote:This 11.1v battery is totaly fine for price i played 2 games with it one in akm and one in rpk style replica. Both times it held up great didnt overheat or drop down in performance. Would reccommend if you need slim battery.
-
- 08.02.2024 wrote:Good fits my ak 12 well and its powerfull and can hold some power lasts quite a while.
I recommend getting at least 2 products for longer games. For milsim i recommend getting more -
- 24.01.2024 wrote:I was tempted to buy a Gens Ace 1400 mA/25C but I bought 2 of this instead
for almost the same price. Seems to be a decent quality, well made and properly balanced. Fits very well under AK cover receiver. I can't say anything yet about reliability in time. -
- 08.12.2023 wrote:One of the best battery in the market. Fit all my Arcturus and E&L AK, my Arcturus Ak12K has little space for the battery and it fits perfectly. I've used it for a whole day of gaming and it lasted the whole time. Of course, if you spray the BB like Rambo, you should have a spare battery with you. If you want a good battery at a good price, choose this one.
-
- 07.11.2023 wrote:Works great, fits the small battery compartment of the CM.103.
I used more ipower batteries in the past, and never had any problems with them. I easily recommend to anyone. Best value for proce ratio. -
- 07.03.2023 wrote:It does fit my arcturus ak but with very little room left. Gives me enough juice to play all day. It lasts a full day of 8 hours with 1000 rounds shot mainly semy on 1.2j. The T plug fits snug and the battery doesn' swell that much. I would recommend
-
- 20.02.2023 wrote:Fits good for Ak12pe.
-
- 26.01.2023 wrote:Odpowiedź sklepu:Mine was broken, it looks like one of the charging wires broke and wont charge. On the first try in my replica it shot like 3 auto bursts and then stopped. I know people with the same battery brand and they are happy, not my casePlease contact our service department and we will do our best to help you.
Please also note that the li-po battery needs to be charged before first use. -
- 17.01.2023 wrote:Fits in my Arcturus AT-AK04 nicely. Lasts a long time, i have 2 but have never needed to use a spare even in games lasting 4+ hours. Not much more to say, but need to fill the minimal character requirement.
-
- 29.09.2022 wrote:It fits tightly under the cover of an Arcturus PP-19. It's a bit difficult until you bend your wires to make everything fit properly, but overall it's worth it since there's no way this battery will not last you an entire day at the field.
-
- 03.11.2021 wrote:It fits under the dust cover of any rivetted VFC type AK (CM.045, BY-005, etc.) I've played 8-10 hour games with lots of full auto actions, but never had to use my spare battery. I have a strong M110 spring (380-390 fps) and a stock motor.
-
-
Ask for item
LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or three (11.1V) cells. These cells are small in relation to the offered capacity, thanks to which they can be used in replicas where space for a battery is limited. Rifles powered by this type of energy source will work more efficiently and longer, compared to the traditional type of batteries.
Follow Safety Guidelines
This product complies with the standards for market approval, signifying that the manufacturer and seller have taken necessary efforts to ensure safety during product usage according to the instructions. Using the product contrary to the instructions is at your own risk.Attention! Stop using the battery if any of the following problems occur: odor, color change, excessively high battery temperature, shape alteration, leaks, or unusual sounds. If you're charging the battery, disconnect the charger from the power source first. Keep the battery away from anything that could catch fire. Dispose of batteries in specially designated containers.
Principles of Correct Li-Po Battery Usage
Your battery will function as intended as long as you adhere to the principles of proper usage:Charging:
- Charge the Li-Po battery exclusively in lithium-polymer mode using a microprocessor charger.
- To ensure even cell charging, use a charger with a balancer (service plug).
- Do not leave the battery unattended in the charger (including overnight). Place the battery in a safe charging bag during charging.
- Do not overcharge above 4.2V per cell.
During Usage:
- Avoid discharging below 3.2V per cell that leads to permanent damage, as well as chemical reactions that could result in ignition.
- Do not exceed the permissible discharge current (capacity in mAh multiplied by the C rating). For example, for a 2100 mAh battery with a 15C rating (2100 mAh x 15 = 31500 mAh) – the critical value is 31.5 amps. Keep away from flammable objects.
- Do not short-circuit terminals, puncture, or damage wiring.
Storage:
- Do not store the battery connected to the replica. During extended storage, periodically check the minimum charge level using a dedicated charger or security alarm.
- Store in a partially charged state – ideally around 70%.
- Shield from direct sunlight exposure. Recommended ideal storage temperature – 12°C.
Attention! Defects resulting from improper product handling are beyond the control of the seller and as such, do not provide grounds for declaring the product non-compliant with the agreement. Consumable components undergo natural wear and tear, which does not automatically mean the product is non-compliant with the agreement.
Safety & Usage Guidelines
Please read the following information for safe product use:SKU: IP-LIPO1200-11.1-TC · EAN: 6977520490335 · Battery Li-Po 1200mAh 11,1V 20C - Deans [IPower] ·
Report safety issue · Responsible person & manufacturer
Report safety issue · Responsible person & manufacturer
Responsible person & manufacturer 

Responsible person for product placed on the EU market:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Poland · shop@taiwangun.com
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Poland · shop@taiwangun.com
Manufacturer:
REPLICAS AVAILABLE ON TAIWANGUN.COM MIGHT BE PURCHASED ONLY BY ADULT USERS. PRODUCTS FOR ASG AND MILSIM USE ONLY.
Questions? We are happy to help. Call +48 123626134 or email us via shop@taiwangun.com
* All prices including VAT without transport costs

