Muzzle brake for AK "Grizzly" [CYMA]

Great piece.

It fits, and you can adjust the threads with the small little allen screw.
Just so its nice and in the good position.

Its also realy beavy so you dont have to mind on bending it.

Good product

It has a poor ugly green finish that looks terrible. No Zenitco marks which is to be expected. It only has 2 grooves for blocking pin and positioning on either one makes the flash hider to sit off centre on E&L replica with 24mm thread. Despite that it is of solid steel construction.

Good steel construction with nice blued finish, although they are slightly off centre. 24mm threads are spaced in a way that when tightened all the way it is completely centered on an E&L AK replica.

Nice item that has the original Zenitco look. Item does not have the Zenitco trade marks on it though, so be aware.

Did not fit my CYMA 74U, as the inner barrel was too long and I did not want to alter mine. It does come with a thread adapter, which is a nice tough though.

Still, a nicely made muzzle device.

Looks, feels and weights great. You get the 14mm and 24mm threads wich ensures that it will fit your AK. It does have some wobble atleast on my Cyma AKS-74u 24mm threads and doesen’t lock on to place at the right angle with the pin that locks the muzzle in place. Also I had to cut my inner barrel down so that it can’t be seen through the muzzle because the Cyma AKS-74u inner barrel is longer then the outer barrel. Still a nice product and pretty close to the real Zenitco one in terms of looks and feel.