Noveske 7.5" DIPLOMAT AEG Rifle Eshooter ETU, Gen-2 - FDE [EMG]

EMG Noveske 7.5" Diplomat Platinum is an electric AR-style airsoft rifle developed by CYMA and EMG under an official Noveske license. Equipped with a full metal construction, V2 GEN-2 gearbox, and programmable Eshooter ETU, the replica supports fast trigger response, high rate of fire, and extensive configuration options. Additional highlights include licensed Noveske markings and two Mid-Cap magazines included in the set.

Construction and design

The replica features a full metal construction and licensed Noveske trademarks. Its compact layout combined with a 9.5-inch outer barrel makes it well suited for CQB environments and operation in confined spaces.

The Noveske NSR 7.5" handguard in the M-LOK standard allows the installation of additional accessories according to user preferences. A full-length Picatinny top rail enables the mounting of compatible optics, red dot sights, and other rail-mounted accessories.

The rifle is equipped with a 6-position Special Force stock with battery compartment and an ergonomic pistol grip that supports comfortable handling and a natural hand position.

An ambidextrous charging handle improves usability for both right- and left-handed users. The design is completed by a licensed Noveske Flaming Pig muzzle device and a set of folding iron sights included in the package.

The included Lancer Systems L5 AWM Mid-Cap magazines with a 190-round capacity are inspired by magazines used in Noveske firearm platforms.

Performance

The High Torque neodymium motor works together with CNC-machined 13:1 gears and a short-stroke setup, supporting rapid trigger response and smooth gearbox operation.

With a suitable power source, the replica can achieve a rate of fire of up to 27 rounds per second.

V2 GEN-2 Gearbox

The latest V2 GEN-2 gearbox has been developed for intensive use and operation at high rates of fire.

The design features a reinforced gearbox shell with radiusing and upgraded bearing seats. It utilizes 8 mm steel ball bearings, CNC-machined 13:1 gears, and a short-stroke configuration that enhances trigger response and firing speed.

The pneumatic system is built around CNC-machined aluminum components, including sealed piston and cylinder heads as well as an air-sealed nozzle. The piston is equipped with a full steel tooth rack, while a bearing-equipped steel spring guide completes the setup.

The replica also features the QSC quick spring change system, allowing spring replacement without full gearbox disassembly.

Accuracy and adjustment

A rotary hop-up chamber provides precise hop-up adjustment and helps maintain consistent settings.

The 6.04 mm precision inner barrel supports shot consistency and improved grouping at medium ranges.

Eshooter ETU Electronics

The replica is equipped with a programmable Eshooter ETU system that expands configuration possibilities. The unit supports BURST and BINARY firing modes, 5 levels of pre-cocking adjustment, and the Active Brake function, which helps stabilize gearbox operation.

The system also provides protection against motor blockage, battery over-discharge, and improper voltage levels. The ETU is compatible with High Torque, High Speed, and brushless motors. Programming is performed directly through the replica.

Package includes

• Noveske 7.5" Gen 3 Diplomat replica
• 2 Lancer Systems L5 AWM Mid-Cap magazines, 190 rounds each
• Folding iron sights

Recommended accessories

• Batteries:
Battery Li-Po 1100mAh 7,4V 15/30C - Deans [VB]Battery Li-Po 1200mAh 7,4V 20/40C - T-connector [VB]Gens Ace 25C 1100mAh 3S1P 11.1V Airsoft LiPo Battery T-PlugGens Ace 25C 1200mAh 3S1P 11.1V Airsoft LiPo Battery T-Plug
• Magazines:
150rd Mid-Cap steel magazine for AK AR-15/M4 - Black210rd Polymer STRIKE MAG M4/AR15 Magazine [EMG]190RD Lancer L5 AWM 300 Blackout Magazine For M4/AR15 [EMG]
• Charger:
V3+ Charger for LiPo/LiFe 2S/3S [IPower]

Manufacturer

EMG and CYMA have developed a licensed Noveske replica based on the CYMA Platinum GEN2 platform. The model combines distinctive Noveske styling with the advanced technical solutions found in the latest generation of CYMA replicas.
Every replica undergoes an initial inspection. It is tested and chronographed using an XCORTECH X3200 chronograph.