+48 123626134 [email protected]
Change language to English Change language to Polish Change language to French Change language to Spanish Change language to German
Press Corner
Login | Register
0 0

AT-AK04-PE with PERUN optical mosfet, ROF 25rps [Arcturus]

Arcturus  AT-AK04E-PE | Discontinued
elbaliavanu yliraropmeT

  • Forms of delivery

    Choose country and enter zip code to see shipping costs.

  • Technical data

    Manufacturer: Arcturus
    Code: AT-AK04E-PE
    EAN 812332027774
    Weight 3500 g
    Replica Model AK47 / AKM / AK74 Airsoft Gun
    Color black
    Material aluminum, polymer, steel
    Fire mode auto, single
    Magazine material nylon
    Accumulator included in set NO
    Accumulator connector type T-connerctor
    Gearbox version v.3
    Bearings diameter 8 mm
    Warranty period 12 months
    Ammo .23g, .25g
    Serial number YES
    Length 890 mm
    Magazine capacity 130 BBs
    Length of internal barrel 380 mm
    Muzzle energy 1.56 J
    Muzzle velocity 410 FPS with 0.20g BBs
    Diameter of Internal barrel 6.01 mm
    Number of magazines in set pcs 1
    ETU MOSFET YES

  • Reviews

    • - 21.09.2024 wrote:
      If you want high end AEG modern AK platform don't look anywhere but Arcturus lines of AK-s.

      For me it's everything i wanted from AEG. Amazing performance out of the box, very good build quality and sturdy feel in hand.

      This perticular version is PE which stands for "performance enhanced" and comes with perun optical mosfet. It's a bit on heavier side due to metal materials.

      BATTERY SPACE :
      Around 17mm x 17mm (on safer side). Maybe can fit 18mm x 17mm

      I used 11.1V Gens ace 1400mAh battery 17mm*14mm*200mm. Others do not fit very well and this one provides aduqate power for this AEG. Good battery for high end AEG is a must.

      I recommend other 5.45x39 mags which are higher quality then ones which gun comes with. I used 180rd AK-12 mags from WELL which fit without any wobbling. Check compatability for other mags.

      Sling is recommended due to heavier weight.

      Pros :
      - Superb metal frame, solid build quality, dosen't wiggle in main frame.
      - Rotary hop up (most aks have bad hop up)
      - 13:1 Gear motor
      - Optical perun mosfet
      - 25RPS
      - Piccotiny rail and MLOK mount on lower handguard.
      - MOSFET : Rate of fire reduction, pre-cocking, binary trigger, Fire selector progaming, trigger sensitivity programing.

      Cons :
      - No battery space (holds very specific batteries)
      - Lower quality mag which comes with rifle
      - Mediocre stock (Small but NOT noticable wobbling in play).


      Opinion rating: 0
    • - 20.02.2024 wrote:
      Absolutely high quality replica. The body and the handguard are very solid. The magazine does not wobble. The upper receiver is a bit too tight, I hope it will get better with time. The shooting range looks good. It's fast firing.

      I think it will be necessary to change the hop-up rubber, because after 35 meters it moves a little to the right and left. But it may just take time to break in. I really wanted a replica of this quality, and so far I have not been disappointed.
      Opinion rating: 2
    • - 27.12.2023 wrote:
      This is my best replica straight out of the box.
      Really good quality.
      If you want a AK modern style then this is your gun.
      Don't need to change or upgrade anything.
      shoot 60-70 meters straight out of the box.
      And the Perun is fully programmable.
      the only negative thing is the battery space there is enough, but it not a quick change. but wit a little bit of mechanical skills you can put it in the stock same as a M4
      So in my opinion don't look further because this is a great gun
      Opinion rating: 2
    Add review


The AT-AK04E-PE is the latest version of the automatic carbine rifle from the new Arcturus PE (Performance Enhanced) series, featuring an additional programming mode.

The main components, such as the receiver, receiver cover, receiver cover latch, safety lever, trigger, trigger guard, magazine latch, bolt carrier, folding stock latch, gas tube, gas port block, front sight base, folding rear sight, and flash hider, are made of steel, just like in real firearms. Smaller parts, including the outer barrel, were crafted from lightweight aluminum and alloys. The entire rifle is meticulously fitted and protected against corrosion. The buttstock, pistol grip, and magazine are made of reinforced polymer.

The PE mechanism is a new reinforced gearbox that is fully compatible with Marui parts and ETU by GATE/PERUN. It features a Quick Spring Change System, which allows for spring changes without the need to pull out and open the gearbox. The gearbox is equipped with a bearing spring guide and a bearing piston head, along with a full steel teeth polycarbonate piston. CNC 13:1 Steel Machined Gears with a rate of fire of approximately 25rps are mounted on 8mm ball bearings, enabling smooth power transfer from the motor to the piston gear, which is mounted on a bushing to withstand high loads. Additionally, the gearbox is equipped with a High-End Optical PERUN MOSFET, offering a range of features such as Alternative Fire Mode, Active Brake, Pre-Cocking, ROF Reduction, Trigger Sensitivity, Progressive Trigger, Binary Trigger, Switchable Li-Po Alarm, Electronic Fuse, Diagnostic System, and Adjustable Trigger Stop.

The replica also boasts a CNC POM nozzle with an O-ring that works seamlessly with a Rotary Hop-Up Chamber for AK. Combined with a PCP Grade Precision Inner Barrel and mechanical adjustment of the trigger stroke, it ensures excellent performance. The latest innovation is a 21TPA High-Torque Neodymium Motor with MIM steel pinion gear.

NOTE! The battery is located under the receiver cover. To access it, remove the handguard latch and slide the receiver cover to the rear before disassembling it completely.

The kit includes:NOTE! We can downgrade to 330 fps (1 Joule) in price. Just write about it in order commentary.

Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.


Safety & Usage Guidelines

Please read the following information for safe product use:
SKU: AT-AK04E-PE · EAN: 812332027774 · AT-AK04-PE with PERUN optical mosfet, ROF 25rps [Arcturus] ·
Report safety issue · Responsible person & manufacturer
Responsible person & manufacturer
Responsible person for product placed on the EU market:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Poland · [email protected]
Manufacturer:

REPLICAS AVAILABLE ON TAIWANGUN.COM MIGHT BE PURCHASED ONLY BY ADULT USERS. PRODUCTS FOR ASG AND MILSIM USE ONLY.

Questions? We are happy to help. Call +48 123626134 or email us via [email protected]
* All prices including VAT without transport costs