[Set] CM.041PDW BLUE Edition [CYMA] + Magazine mid-cap for MP5 [CYMA]

Bought short MP5 mags for my MP9 Airtac HPA adapter. They work very well, though insertion is a bit tight. Capacity is perfect for gas setups, but feels a little low for AEG use. Overall, a solid buy.

Doesn't fit my JG replica, very very tight to fit in and doesn't lock in place
The plastic feels cheap and bad in the hand
You can't go too wrong for the price, but I can't recommend unless you're dead set on the short 15 round mags

very nice mag, fits fine in my mosquito mk1 from hybrid armory. it has a nice weight to it to feel good quality. its metal case is thick enough to be durable. i would recommend it without second thought. i bought two to test it out, and i would definitely buy again.

Mega dobre zásobníky ja osobne ich používam na mp9 od maruyama alebo na ssp5 od novritscha pre airtac adaptéry naozaj doporučujem podávajú skvele robia to čo majú či ľahké či ťažké bb a najlepšie asi zo všetkých pasujú aj do týchto apadterov jeden som ešte používal do de noveske smaozrejme cez adapter

Cargadores de excelente calidad, el producto llegó rápido a casa y bien empaquetado.

Ordered this mp5k from the netherlands it areived after only 3 days!! I played with it last weekend and im impressed with this little beast its solid accurate and it doesnt even have any hickups without a mosfet/etu perfect for cqb and medium ranges asked the employers to change the spring and the output was spot on 1 joules, this also takes ak type magazines on top of the teciever so no fiddling around with fake peq boxes etc all and all great gun amd great service till next order!!!

Absolutely love this product!
Feeds very reliably without issues.
Perfect option for those who have a MP5 type hpa tap on their GBBR but hate the extra lenght from fullsize MP5 magazines.
Only thing left for me is to figure how to configure my rig for them.
Two in one m4 taco pouch has been okey so far but not ideal.

Come sempre la Cyma offre repliche ben fatte e perfettamente funzionanti, sono anni che mi fornisco da Taiwangun, e sono sempre contento dei pressi e delle repliche fornite.
Consiglio di acquistare da questo fornitore, con enorme disponibilità di accessori e repliche.

Got it set at 320 fps because of local regulations with the reshimming service as well and it works perfectly.
+It sound smooth when shooting ,no grinding noice
+It takes AK batterys
+It feels great on the hand ,it is heavy and the materalias feel solid
-When reloading you have to push the magazine with force or else the wont hold

Great replica for the price. Cyma V3 gearboxes are very reliable, and the externals are solid.

Shipping was super fast to the US and the price wasn't too bad, especially compared to other international retailers.

I bought a few copies of the short Tokyo Marui MP5 magazine before I realized CYMA made one of comparable quality for way less. No compatibility issues, durable construction, and a reasonable price. Nothing to complain about. The reliability you expect from a mid-cap.

Its perfect for my HPA MK23 setup. Its low profile, perfect feeding, easy to store. 65 BB its more than enaught capacity. It very sturdy, its a metal construction. I dropped it few times, not problem.
Buy 3-4 pcs and you ready to go to use a HPA pistol, with an MP5 adapter!

Fantastic mags, full metal and feed beautifully!

Not much else to say on these, they work and feel solid!

Given the lower capacity,you will be reloading more which is fun in itself!

Note: i bought these for the CYMA Rapid Strike PDW, they did NOT fit without modification to the mag catch on the gun.

Really nice quality, feeds really well even down to the last BB, and the spring assembly seems very sturdy, no problems with the feedlips at all.

Bought these for my HPA adaptor for my KC02 and they sit really well and no problems at all

I mostly got this to see how it looked with my MP5. It looks good and fits comfortably into my retention pouches and pistoll mag pouches.
It feeds fine on my Cyma MP5. 65 rounds is also quite good for it's compact size.
the construction is metal and it feels robust and sturdy.
If I wanted a lower profile magazine set these would be ideal.

I bought 4 units, the product is cheap and works great, no factory defects, no jams, but not suitable for use with JG works mp5 guns. For use with JG works mp5 requires additional machining with sanding tool.

Perfect feeding magazine great sizing used it for my MK23 and ssx303 with an MP5 adapter works perfect and its not a cheap plastic magazine because its metal it has a great realistic feel to it and also improves the durability

Really good mags. They are from metal and feel really strong and durable.
I use them with an airtac ssx23 to mp5 adapter. They fit perfect and have no feeding issues.
For now I have 9 mags and all off them working fine

Amazing price!
Already a great little Submachinegun out of the box.
Even more fun after upgrading with 13:1 gears and a mosfet.
Hardly any play between parts.
Just wish Cyma didn't use locktite on almost every screw.

It feeds well, its small, its fun, its cheap. Great mags I have bought 7. Can fit them all on my belt and in my pants if I need. After you fire 10 shots I tend to change mags since I am paranoid.
This made me revert back to the stock hicap and 3 short mags in my pants for backup as a setup. I recommend.

this magazine is small enough yo use with pistol mag pouches and it has great weight and the bb count is accepted in my world but im not a fa user and dont shoot a full mag on one target

This replica was big surprise for me.
1. There were no imperfections, no scratches on the replica
2. It feels solid, it does NOT feel loose or wobbly, hence some freeplay is there- in the stock joint, minor freeplay between lower and upper body. Magazine sits in place very nicely
3. it is suprisingly heavy - thanks to solid build- upper part of body is from metal(some kind of light aloy - ZnAl probably), also front and rear sights, stock base, gas tube, gas block, barrel, flash hider and magazine(steel sheet metal body). Polymer parts(stock, grip with lower body, front handguard) feel ok too - they does not feel cheap, yet not premium either - standard quality, but it is not soft and it feels sturdy and not easy to break - simply OK.
4. performance wise it shoots around 360-370 fps with 0.20g bbs out of box and with battery which was in box it gives fire rate around 700-720 rpm. I have not tried accuracy yet.

I must say I realy like it out of box-how it feels for the price(you can find better replicas, but they cost much more), performance and accuracy can be tuned if wanted. For me really good ratio between quality and price.

It came well protexted from TG and also package had nice degree of replica protection. In the box was replica, midcap magazine, battery, battery charger, small bag of BBs, cleaning rod, manual, and weaker spring.

Here are my videos which I made about it:
Preview: https://www.youtube.com/watch?v=Bge1wZfG-Fo
Unboxing: https://www.youtube.com/watch?v=GMK9AKn9JCI&t=35s

Funky little magazine. Very light & Durable.
Used it in both my Cyma MP5SD6 and Cyma MP5K.

No feeding issues whatsoever, loads every last round. I use .28g Bio BBs in mine, never had any issues with it.

Mega AEG very well processed there is nothing to complain about good weight and precise ideal for cqb games I also order accessories that fit perfectly (rail mount for MP5 / G3 - low) perfect for any red dots or other visors I can only recommend for that money top

Pros:Great replica. Performed well on the first game. Compact and ergonomic gun.

Cons: Difficult to remove and place the battery. The factory nimh battery is not good. Have to change it to a lipo battery.

Pros:Great replica. Performed well on the first game. Compact and ergonomic gun.

Cons: Difficult to remove and place battery. The factory nimh battery is not good. Have to change it to a lipo battery.

Very pleasantly surprised to find a site with this actually in stock, was concerned might be old or defective, but was brand new, and more than I could've wished for. Gun is made of metal/polymer where it should be, and a nice strong metal as well, weight is evenly distributed well, folding stock doesn't jiggle when folded, no parts of the gun wiggle, overall a great gun. V3 gearbox is great as well, gives the gun a nice little shake when firing, especially full auto. Only thing I would say is a turn off, is that the charging handle feels weaker than the rest of the gun, albeit it isn't functional when the battery is in the gun either. The feeding lips are also a plastic, and can be somewhat damaged after excessive use.

Pros:
- Great gun for the price, great feel, sturdy strong build
- Good weight and strength
- Good accuracy and grouping at range surprisingly
- Fast firing
- Great MP5K overall

Cons:
- Charging handle can be fragile from what I've heard, and from what I've felt it is somewhat true, but mine is still going strong
- Feeding lips are plastic, and can be nicked after time, but doesn't seem to affect feeding thankfully
- Can be on the heavier side for a PDW

Price and quality are excellent. External build is superb, internal quality is very good, surprised that barrel is extremely high quality. I would buy another! Shipping was fast and the FPS limit requested was perfect.

it has a nice, heavy metal construction (with the exception of the stock, lower receiver, and foregrip of course) and shoots great out of the box

It still hops 0.28-gram bbs like a champ and I'm sure it will hop heavier bbs (I did not have heavier bbs laying around at the time of this review)

The selector switch is also great. It's not as spongy as most other mp5k fire selectors.

In terms of changes - I only installed the perun ab++ mosfet.

It shoots great out of the box
Everything that should be metal is metal
the fire selector is great (not like most other mp5k fire selectors)
hopup works great too
it's compact

The charging handle can't be used when the battery is installed, it WILL break if you slap it too often

the little plate on the sling loop is a little loose out of the box (at least mine was) - make sure you push it in firmly or you will lose it and won't be able to use your slingmount anymore