[Set] R601H JW3 TTI Combat Master (upgraded version) [JAG Arms] + R601 JW3 TTI Combat Master and R614 JW4 Pit Viper Magazine [JAG Arms] + Per-Fit H...

Virtually no complaints about this one, unlike my upgraded Sand Viper. Maybe the barrel color is not the exact rose gold as the real pistol, it's more like bronze, but it's not like i have the real thing around to compare.

Great pistol and overall performance. Has a really nice kick to it when firing and the looks are absolutely amazing! Sadly tho my slide catch broke after trying to fix a locking problem. The slide catch stuck very good at first, but putting it back made it stick less to the gun, in just a few shakes your slide catch would just fall off. After reassembling it the slide would still not lock back if there was an empty mag. I tried to fix it for HOURS but eventually the slide catch snapped in two. The pistol still usable, but I had to attach tape to both sides of my pistol just to make sure the pin didn’t fall out and it has kinda lost the realism to it…
My only advice is to be careful with the slide catch, it’s thin and can break easily if you’re not mindful.

De R601 JW3 TTI Combat Master en R614 JW4 Pit Viper magazijn [JAG Arms], is een heel goede een stevige magazijn voor de R501 de BB'S gaan er gemakkelijk er in de green gas is gemakkelijk bij te vullen.

Fits perfectly into the R614 TTI Pit Viper. The valves don't leak, it's great. When you hold it in your hand, you can see by its weight that it is made of quality materials. Great feed. With one filling of the canister with gas, you can shoot approx. 70 BBs

Amazing pistol, without even changing the bucking or anything just normal maintenance the slide is fast the recoil is not too little but not too much so it feels good to use, it's accurate and if paired with an extended magazine it can be a real menace. I've used it in cold and warm weather with black, red and green gas.

The magazine is very well build. I use it in the EMG Staccato P T8 and it fits and works perfectly!!! I feel like this magazine shoots more snappy then the standard mag. So a clear recommendation for me!

I picked up an extra magazine for my Pit Viper and it’s been working perfectly so far. Gas efficiency is solid and feeding has been completely reliable with no issues during use. The build quality feels sturdy and the baseplate makes it easy to grab and swap quickly. Overall it’s a great spare to have and matches the pistol well.

This magazine fits perfectly in the Combat Master TTI JW3. It is exactly the same as the original magazine. The only problem I have with it is that sometimes the gas cap leaks when it is about half full of gas, but this may just be a bug with my product.

This mag fits perfectly & at a great price!

Having had issues with my mags in the Pit Viper purchased this to test the theory that the issue was with the magazines I had & this mag worked like a charm.

The service from Taiwan Gun was perfect as always. Quick delivery, great communications and great prices.

highly recommend this mag & Taiwan Gun

The magazine can hold about one and a half gas cans and 30 BBs. All metal, easy to service. I use this magazine for a R601 JW3 combat master pistol. I am satisfied with the product. Thanks, taiwangun

⭐⭐⭐⭐⭐ R601H JW3 TTI Combat Master (upgraded version) [JAG Arms]

The upgraded R601H is the most reliable and durable GBB sidearm I’ve used. I average about 2,500 rounds per month through this pistol and it still runs like new. The upgraded magazine never leaks and its enlarged gas reservoir plus efficient feed design means I use noticeably less gas per session compared to standard mags. In practice that equals fewer refills and lower running costs during long weekends of play.

Out of the box the external quality stands out: CNC slide, tight tolerances, and a nicely stippled grip that gives solid purchase even with sweaty hands. The slide action is smooth and the trigger is clean with a short reset. Accuracy is very good for a stock pistol; follow-ups are quick because the trigger and reset are predictable. Feeding is consistent and reloads are clean and positive.

Practical long-term notes: the hop-up/bucking can benefit from a simple upgrade for tighter groups, but even stock accuracy is competitive. The only recurring cosmetic note is that the fake brass barrel finish can show wear where the slide contacts it; this does not affect function. For longevity I recommend routine external cleaning, light silicone on moving polymer parts, and occasional valve checks on magazines. The upgraded mag’s reliability (no leaks) and gas economy make this pistol cost-effective for heavy users. If you want a John-Wick-style Combat Master that will survive high round counts and still feel crisp, this is it.

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

Arrived in 7 days after ordering (to Portugal)

Works perfectly. Is compatible with the Army Armement Pit Viper, although the logo is slightly different from the original mag that comes with the replica. Apart from that it's exactly the same. If you're looking to match all the mags this is the way to go, given the availability (this is the only place I've found stock) With green gas lasts around 40 shots if not in very quick succession. Zero leaks.

Great pistol, really impressed by the external quality
The slide feels smooth, trigger is light and fits very comfortably in the hand.
Ammo capacity and gas efficiency are good.
Only downside is that the slide will scratch off the paint on the barrel very quickly

I bought this additional magazine for my Combat Master JW3 and I have nothing to say about it. Smooth, it reloads well with both BBs and green gas. The magazine is completely metal except for the patch at the bottom with the Taran logo in plastic. Great for practicing like in the movie. Recommended

Very nice pistol that replicates the Taran Tactical Combat Master from John Wick 3. The grip is a bit of a personal taste and I'm not crazy about it but it is completely hand made and not machine made like others. The slide slides well and the aesthetics are fantastic. The only complaint is that the fake brass barrel tends to get ruined after a while due to the sliding with the slide. However, other barrels are available as spare parts on the store.

These are very good hi-capa magazines for their price.

I have never had these misfeed once on me in about 5 months of use.
The gas efficiency is around 2 mags which is decent but not amazing.

Issues:
The baseplate wobbles because it is locked in a way that allows it to wobble around.

I have had a few leaks. Most come from the valve loosening, and I just needed to tighten it.
One time, I had to replace the o-ring on the fill valve.

I do recommend buying these mags because Tm ones are twice the price and they are better but not twice as good :)

Great replica if you are looking for performance out of the box, personally I only switched the bucking with a maple leaf one using the TaiwanGun service.

Everything about this replica is great, smooth and easy reloads, very nice grip, smooth slide, the trigger is honestly amazing I could not see how it could get better which was really important for me as that is a massive part of accuracy and follow-up shots.

I would recommend this to any newer or older player.

The magazine fits perfectly and seems to be 1:1 like the original magazine I have. The price/quality ratio is awesome. I would recommand it anytime. The delivery time was about 1 week only. I will probably order in the future again. I ordered an bunch of other stuff on taiwanguns and everthing is just as it should be.

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

No issues with gas leakage (maybe other people experience defective units). bought the R614 TTI JW4 Pit Viper GBB Pistol and needed a second magazine. It does its job as intended for the moment. Thinking of buying another one when the need arises.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

This is my second order from taiwangun. The two 28 rounds magazines are a perfect fit for my TTI Pit Viper that I got from taiwangun also, fast delivery, happy customer, and I'll be back for more products for sure

Absolutely awesome and it shoots great !
Iv bought few models of these Army Ar. Models and they all shoot great. I just change the bucking because they come with bad ones . Other than that they are great !!!!

It is my first purchase from TAIWANGUN .Match perfectly with mi TTI Pit Viper ! I already tried it on the field and it works how supposed to be. I am satisfied with my purchase and definitely will purchase again.

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

Good magazine for low price. Holds has pretty good and the valves and seals last for a long time if maintained just a bit.Doesn’t get scratches that easily. All in all 10/10 for all compatible replicas

For those you want to know, you dont have to buy overpriced mag from EMG for EMG JW4 Pit Viper, this one fits perfectly and its half a price, no issues at all, highly recommend these mags due to pricing, cant get better for that money.

Gave me a defective item. I talked to customer service and they said they were going to give me a refund but then stopped replying when I ask them when? I paid about $16 for this item but paid about $30+ for shipping and all I’m asking is to get my $16 back not shipping and they still wouldn’t refund it

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Bought two magazines and they're both airtight, so no leakage.

They have a nice weight to them and the internal gas tank, holds up for quite a few rounds.
The TTI markings add that little extra realism, a very nice attention to detail.

Would recommend.

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

This magazine is high quality!
It feels very good to hold in your hand, and of course is perfectly fit to the R601 ( i don't know how it fit in otther models because i only have the R601)
whit this magazine you can shoot 30-40 shot and still have a little bit gas. this magazin is durable, i drop is sometimes and not broke, not leaking. perfectly fit to hi-capa magazin pouches.
the feeding works perfectly.
easy to disassemble, and if you clean it regularly then it will always work perfectly.

I love it!
This magazine is high quality!
It feels very good to hold in your hand, and of course is perfectly fit to the R601 ( i don't know how it fit in otther models because i only have the R601)
whit this magazine you can shoot 30-40 shot and still have a little bit gas. this magazin is durable, i drop is sometimes and not broke, not leaking. perfectly fit to hi-capa magazin pouches.
the feeding works perfectly.
easy to disassemble, and if you clean it regularly then it will always work perfectly.

Great marked mag. Feeds and works well!
Has a nice weight to it, the TTI markings are put on nice and last through heavy use.
Is TM compatible too! Haven't had any issues with any of my mags for all the time I've been using the JW3 2011 combat master.
Definitely recommend the Army Armaments mags (and John Wick replica's too for that matter!).

Will definitely get more of this brand and this style.

For the price, they are really good, a little wobbly, but feed just fine
The go great with the John wick 3 and 4.
I'll buy more for sure
And they have a really good gas capacity
The pack was nice and fast delivery

High quality magazines!

These mags have a heavy & sturdy feel to them and can definitely take a hit.

I'm able to fit around 26 bb's in them, They also have a nice amount of gas capacity, being able to hold about 1.5 to 2 refills of gas. (This does depend on the weather and fire rate).

So far I have had 0 issues with any type of leaks and i will definitely buy these mags in the future!

Incredibly solid magazine with a premium feel.
Excellent material quality.
28rd capacity.
Super gas capacity, I can empty two full magazines before needing to refill the green gas.
A must have for all compatible Army Armament pistols.

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

Great product. It helps me. I love it . Great to buy and great to use. Powerful and good quality for low budget. Thank you for that. Best product money can BUY! I love it. I love Taiwangun and Blackfriday!

Rien a dire sur ce site, mais chargeur de mon pistolet vont super bien quand je mais le gaz dans le chargeur et les billets et quand je tire avec c'est super cool merci a taiwangun super bon site pour de belle réplique dommage que vous ne pouvez pas les customiser sur le site

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

Very Good Quality built and overall good looking, seems a legit mag. Drops and Fits as it should. Keeps the gas inside without leaks or any issues, the logo at the end of the Mag just looks amazing.

Real greasy when they first came in wich is fine for conservation, Just make sure after you tighten all the valves etc you clean them and blow some gas trough it they work fine for me on all sorts off gas, I used Nimrod Red And Extreme and Nuprol 2.0 without any problems

very good magazine, strong and solid, I like the bottom of the magazine.

Unbeatable in terms of price value, as you can even buy several pieces of it at an affordable price.

Many people wrote that in the case of several magazines, the seal may need to be replaced for some pieces, but I didn't need this out of four pieces.

Bought 3, 2 of them were fine but one came with a broken valve and o-ring seal. A few mails with the customer support and they sent replacement parts and other than that they're great. Perfect and balanced weight, holds a fair amount of gas and bbs and seems very reliable.

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.

Green gas mag

Hi capacity,
good volume of gas 2-2.5 mags per gas,
Cheaper than most mags £14 bargain I bought 4 extra,
Metal base with nice TT trade marks,

Had 1 mag with manufacturers fault which I returned free of charge and had a replacement sent to me in 2 weeks and another I had to replace the inlet valve oring which was no big deal, rest of the mags have been perfect,