[Set] 1911 [KJW] + Per-Fit Holster for more than 80 handgun models - Black [Amomax]

Build quality is fantastic, even when compared to Tokyo Marui replicas already owned.
Magazines feed exceptionally well and the gunis gas efficient.
Bottom line is if I had to buy a 1911 replica again, I'm ordering the KJW one.

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

Before buying this KJW 1911, I already had bought the Army Armament version, which costs only half the price, and also appears to be rather good. Still, this Taiwanese production promises to be of higher quality, and as I already had bought a mag for this one, I felt like getting myself this KJW 1911 as well, with a few extra mags on the side.
It feels and handles according to expectation: sturdy, smooth action, no obvious tolerances, reproducing grouping and a properly working hopup to support it all.
I'm actually more of a Deagle kind of guy, but the weight of those mags was starting to become killing in field skirms. These 1911's are perfect as a side arm: rather light, yet realistically heavy enough, while the mags are small and light, so that I can carry them without much extra burden. There's tons of compatible parts for these 1911's too. I can only hope that the quality of this KJW will correspond with its reputation. The AA version also feels quite nice and smooth and all, but battle experience will reveal as how reliable this materiel will remain after some beating.

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

I bought this M1911 during the sale and I do not regret it. The replica feel very nice and used with the green gas magazine it has the proper energy output. The metal replica has a nice weight to it and the safety works simple yet effective. It may take some practice to fill and the distribute the bb's in the magazine in a way that the capacity is fully used. Sometimes the gas in the magazine is depleted before the last bb is shot. Overal I'd recommend this replica, but I might want to try it with a Co2 mag as well.

This full metal replica is dynamite!
Very realistic feel and also very accurate.
I bought both GBB and CO2 magazines and both are working great: good suplly of amo.
Th amount of Joules is enough to join airsoft skirms.

Reliable little gun that looks faboulus because of the metal body. I like the idea that I can use co2 mags if I want to. Lots of aftermarket parts available for this pistol if anything needs replacing in the future.

The pistol is really nice too look at and feels great in the hand, however the only thing you might want to consider is to change the piston head, because it makes the gas leak. So change that part and you have a real nice and sturdy gun

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.