[Ensemble] BY-001A - BLACK [Double Bell] + Chargeur 180 billes pour réplique AK12 [WELL]

Chargeur magnifique d'AK12 convient très bien pour mon AK74u specna arms et mon AK74MNS de chez atm.

Donne un look agressif et moderne sur des ak

parfois simple et traditionnel

je recommande totalement testé et approuvé

Très bonne capacité pas obliger de le charger à block grâce aux 30 coup sa le rend plus réaliste vraiment super pour faire des partie en dominical j en utilise 5 mais par la suite je vais en recommander est en prendre 5 autre pour faire du 30cp sa rendra le jeux plus réaliste

Great AK(74) magazine.

Take approximately 150 bb, very light, feed perfectly Well AK12/23 and S&T AK74MN (sport).
Only downside: a little wobble in both on those replicas.

I strongly recommend this magazine. For the price, it's a very good "bang for your buck".

Si vous êtes russophile vous allez être comblé par cette réplique à prix sympathique !
Rapport qualité prix presque imbattable

Que dire à par parfait, chargeur réaliste et très bien conçu

De bons chargeurs solides et robustes, un feed plus que correct a la vue de la cadence de la réplique qui va avec, environ 120 billes et une esthétique futuriste qui fait vraiment la difference une fois installé sur la réplique.

Pour moins de 10 euros, cela fait un midcap performant, robuste et peu onéreux pour les débutants voulant jouer ak

Best ak-12 magazine and very realistic the ak-12 arcturus magazines are old and outdated because they are ak-12 magazines (2016) good job for WELLPRO wellpro surprises me every time I hope one day we will see the ak-12 gbbr 10/10 for wellpro


Cordially
Shawn.

Alors, en soit l’AK est très belle, il y a un peu de jeu dans la crosse une fois déplier, et dans le garde main supérieure mais rien de grave.
Quand elle tire, elle le fait bien, elle est assez précise et puissant. Elle a du punch !

Mais j’ai eux des problèmes, les billes, des les premiers tires, se bloquait dans le canon. Tawangun m’ont proposer de mettre de l’huile de silicone sur le joint du Hop-up pour le lubrifier, donc quand je le fait ça marche, je peux tirer correctement, mais le problème c’est que je doit le faire avant presque chaque partie sinon les billes recommence à ce coincer. Ce qui est pas vraiment normale de devoir le lubrifier aussi fréquemment.
Le ressort qui sert à retenir le couvre culasse et la pièce qui le bloque avait tendance à me sauter aux visage lorsque que j’ouvrais la partie supérieur de la réplique, car le ressort ne restait pas à ça place, j’ai pue réparer cela simplement avec un peu de scotch.
Le sélecteur de tire a aussi tendance à descendre trop bas

Si on passe tout ça je pense que c’est vraiment une belle réplique, avec des belle finissions, (c’est ma première réplique), et à ce pris là, on pouvait pas vraiment s’attendre à mieux. Quand on achète à bas prix, il faut être prêt à rencontrer ce genre de problème.

Attention : Le chargeur Cima ne s’adapte pas correctement avec l’AK74U double bell, malgres le faite que Tawangun affirme que si, il ne s’emboite pas.

Un pignon de la réplique a eux des dents qui se sont décroché au bout de 6 chargeur, nul blocage complet de la réplique, contact du sav taiwan gun nul il font tourner en rond pour ne pas récupérer la réplique

Pour le prix vous avez une gearbox avec un système de changement rapide de ressort
Un garde main en bois
Une réplique entièrement en métal
Une bonne base pour un custom ou un gros upgrade
Nettement moins chère que cyma

Réplique très réaliste, les finitions sont belle et c'est du véritable bois.

J'ai pu rencontrées un peux de jeux dans la crosse une fois déplier. Et je cherche comment résoudre le problème, je ne pense pas que sa soit sur toute les répliques mais un soucie a la soudure de la pièce.

J'ai acheter la réplique pour faire un custom, du coup un très bon premier prix pour faire un interne custom. Je vous conseil la réplique pour débuté ou bien faire un custom personnel de celle ci.

Nous pouvons adapter une mount QD sur la réplique car elle dispose de la plaque sur le coter de la réplique qui peux l'accueillir.

Bonne achat

Le minimum requis

Rapport qualité-prix incroyable
Puissance en FPS comme prévu

Très léger jeu dans le garde main inférieur mais rien de grave.

At first i was heasetend whether i should buy this gun. But i took a chance and bought it anyway. Great choice. Good build quality. Real steel and wood. Has a good weight to it and shoot real hard and accurately. Definitely recommend

Hello guys!
Just a short review of the WellPro AK12 magazine. I use two of them for six months, and they work perfectly with my CYMA 029U. I really like the high capacity, and the plastic quality feels really solid and durable. Definitely a great choice!

Honestly my favourite airsoft gun so for and my first from tiwangun the double bell BY-001A or rather the aks-74u it's a realy good
Replica of the gun haven't got to use it yet in
A game looking forward to it tho. All in all a great starter gun if you want a nice piece of history. Anyway thats all stay cheeky brikei

Bought it for a friend
Nice budget ak, good for starters
It packs a punch
It feels good on hand on par with cyma
The wood is better quality than i expected
I might grab one for myself in the next sale since i want a classic lookin ak-u

Okay mag does what it should the way it should, I ussed it in 2 fights w 0 issues so far. I used it on my Arcturus AK12 its not compatible out the box but very little sanding w a dremmel did the trick(only shortening the bottom of the front lip that catches the front inside of the magwell.

Given what it is and for how much, you can't ask any more. It's a simple mag that works and does the job as expected. It having a push follower to try and minimize the amount of BBs lost is a neat bonus.

Hi! I tried it on the advice of a friend, now I have ten of them. A little tuning with a knife or a file and it fits perfectly on the AK12 from Arcturus. The only thing is that it fits without a click))) For this money, I think it's impossible to find a 180 bb magazine. Tested, I recommend.

Beatifull replica, full metal and wood grips. I have this replica for 3 years now. and bought it on sale for 95 euros. And it has been extremely reliable. I only changed the bucking, for a maple leaf one. the replica still works great since the day it came out of the box.

They're really nice magazines! They feel really solid even though they're made out of polymer, and the base plate is re-enforced with metal so that it's more durable. Genuinely the most ergonomic feelings mags I've ever seen.

Great mag for the ak-12. Its cheap, strong and works well, its feeds bb's really well. Hasnt jammed once. Ive dropped it already a bit and there isnt even a mark on it. I bought 3 of these as they are mid caps and dont hold as much as high caps but its worth it so you dont have to wind the mag, would recommend

Despite their plastic material, the magazines are well assembled and dispense nicely, although I did not drop them on the concrete.
And it was really cheap at a bargain price!
And it was really cheap at a bargain price!

Despite their plastic material, the magazines are well assembled and dispense nicely, although I did not drop them on the concrete. And it was really cheap at a bargain price!

Despite their plastic material, the magazines are well assembled and dispense nicely, although I did not drop them on the concrete.
And it was really cheap at a bargain price!
And it was really cheap at a bargain price!

Very lightweight, might feel cheap in the hands, but for the price, they're perfect. They feed very well, and have a slightly extended follower to minimise BB loss when pulling the mag out.

Approximate real amount of BBs is 168 out of the 180 advertised, which is 93.3%. Kudos! There are more expensive mags out there that don't reach that percentage of advertised capacity.

Magazine is stated to go with the arcturus aks but it doesn't fit in the AT-AK12K PE specifically that I ordered these with, I had to file them down to make them fit which voids your right to return and warranty, I had to fiddle a while on each mag to solve double feeding issues. I'm sure it works amazingly in other replicas but not the arcturus AK line without fiddling.

Fits great, and it has the extended follower so all BB's are expended.

I think for this price this is a very good replica!
For a 145 euros (when i bought it) you get a very nice ak, with no wobbly parts, and a decent FPS. I wouldn't recomended it as a starter gun, beacuse it dosen't come with cleaning rod and any nice quality box. But this is why it's only a 145 euros, and still a good replica. In my opinion its better then the cyma version, becouse of the price. One thing I would recomend is to buy a better hopup, couse the one it comes is not the best, and you not going to be that accured, but it's not that important. And maybe a sling couse the gun can get a bit heavy after holding it for a while, but pay attencion to that not every AK sling is good for it, beacuse in the front it has a very little hole for a sling. I had two games with it and it preformed without problems.
Overall this is a very solid, good preforming replica, and I recommend buying it.

Feeds well, feels

The replica is very solid, no wobbly parts. With the 390 fps it shoots around 400 with a decent battery. At the triggerguard the internals are exposed, but its not seenable only, if you look from a specific angle. The replica is not the heavyest , but I would reccomend to buy a sling, cuz you might have ro hold it for hours. This is my first full metal + wood replica, and for this price its a I'm very happy with it. Fornmenthis is my second replica, and its really grate for that.

This is none of the best magazine for AK available on the market. There is a mistake in description. The mag capacity is 180 bbs not 120.
I own 4 mags, all work well, no jams.

I am happy with this purchase.

Thanks to taiwangun for fast delivery!

Very tight, no rattle at all.
I only changed the magazine with a steel one.
I had a little problem with stock locking position easy solved.
Overall a good aquisition.
Sadly I didn't knew that battery is coming without charger. Now I need to buy a charger from somewhere else.

Solid feel with full metal and real wood construction AKS-47UN for very affordable price. I shoots brilliantly considering replicas barrel length and price. In my replica there is absolutely no wobble in the folding stock nor anywhere else. It takes all of my Cyma and Arcturus magazines but does not take LCT drum magazine.

Only negatives are about assembly quality (in my example): as front of the gun is slightly misaligned iron sights are fully useless, stock is slightly misaligned and does not naturally lock in the folded position (it can however be manually locked) and selector required disassembly and reassembly for it to feel right.

I do recommend this replica, however it might require some work and a optic on a sight rail to become fully effective in the field.

Steel receiver, real wood foregrip. The rear sight base and the latching mechanism (both open and closed) and the hinge of the stock are made of pot metal. A little wobble on the stock.

Internally good parts, motor does well with the stock spring (~400 fps with .2 bbs). Ventilated aluminium piston head with full steel teeth piston. 8 mm ball bearings seem to be the weak point, I tried to replace them with the cross-pattern steel bushings, but they are too high, so the gearbox could not be closed properly. I only replaced the stock nozzle with an O-ring one and the cut off lever with a steel one. I can't review the factory hop up bucking, as I replaced it with a Maple Leaf Monster.

Additionally, the transparent hopup chamber makes it easy to upgrade with a tracer unit keeping the replica short without the use of a tracer silencer.

Perfect for the price. The main parts are made of iron, the workmanship of the wooden parts is good, it is well put together, it does not wobble or rattle. It's a solid, durable piece, it won't hurt if you drop it. Perfect for Cqb.

Shoots fairly accurate, looks and feels amazing with the real steel and wood housing. I mounted a rails to be able to mount a sight and it looks great now. Still the old school feeling with the wood really completes the look and feel

They are certainly a lot nicer than they used to be back in the days of DBOYS. Still not quite CYMA level, but they are cheaper than CYMA for the equivalent gun, a few little tweaks and they are potentially cracking pieces of kit. The build seemed very stable and solid enough that I would have been hard pressed to tell the difference between Double Bell and CYMA.