BY-001A - BLACK [Double Bell]
Notre prix*:
$145.29
-
Formes de livraison
Entrer le Pays et le code postale, afin de voir les couts de livraisons.
-
Spécifications techniques
Poids: 2800 g Couleur: noire Matière: aluminium, bois, acier Mode de tir: auto, semi Modele chargeur: hi-cap Matiere chargeur: ABS Batterie inclue: NON Type conneteur batterie: small Tamiya Version gearbox: v.3 Type roulement: acier bille Diametre roulement: 8 mm Periode garantie: 12 mois EAN: 5901698404031 Ammo: .23g, .25g Numero de serie: OUI Longueur: 730 mm Capacité chargeur: 450 BBs Longeur canon interne: 270 mm Energie sortie projectile: 1.41 J Vitesse initiale: 390 FPS avec billes de 0.20g Diamètre canon interne: 6,05 mm Modele de réplique: Répliques Airsoft AK47 / AKM / AK74 Fabricants: Double Bell Code: BY-001A -
Opinions
Ajouter un avis-
-
09.08.2024
A écrit:
Si vous êtes russophile vous allez être comblé par cette réplique à prix sympathique !
Rapport qualité prix presque imbattable -
-
05.01.2024
A écrit:
Odpowiedź sklepu:Alors, en soit l’AK est très belle, il y a un peu de jeu dans la crosse une fois déplier, et dans le garde main supérieure mais rien de grave.
Quand elle tire, elle le fait bien, elle est assez précise et puissant. Elle a du punch !
Mais j’ai eux des problèmes, les billes, des les premiers tires, se bloquait dans le canon. Tawangun m’ont proposer de mettre de l’huile de silicone sur le joint du Hop-up pour le lubrifier, donc quand je le fait ça marche, je peux tirer correctement, mais le problème c’est que je doit le faire avant presque chaque partie sinon les billes recommence à ce coincer. Ce qui est pas vraiment normale de devoir le lubrifier aussi fréquemment.
Le ressort qui sert à retenir le couvre culasse et la pièce qui le bloque avait tendance à me sauter aux visage lorsque que j’ouvrais la partie supérieur de la réplique, car le ressort ne restait pas à ça place, j’ai pue réparer cela simplement avec un peu de scotch.
Le sélecteur de tire a aussi tendance à descendre trop bas
Si on passe tout ça je pense que c’est vraiment une belle réplique, avec des belle finissions, (c’est ma première réplique), et à ce pris là, on pouvait pas vraiment s’attendre à mieux. Quand on achète à bas prix, il faut être prêt à rencontrer ce genre de problème.
Attention : Le chargeur Cima ne s’adapte pas correctement avec l’AK74U double bell, malgres le faite que Tawangun affirme que si, il ne s’emboite pas.Thank you for this opinion and we are extremely happy that the purchased replica suits you.
Please contact our service center and we will tell you how to adjust the magazine.
-
-
13.09.2023
A écrit:
Odpowiedź sklepu:Un pignon de la réplique a eux des dents qui se sont décroché au bout de 6 chargeur, nul blocage complet de la réplique, contact du sav taiwan gun nul il font tourner en rond pour ne pas récupérer la répliquePlease follow the instruction from the service department and we will found the solution.
-
-
02.11.2022
A écrit:
Pour le prix vous avez une gearbox avec un système de changement rapide de ressort
Un garde main en bois
Une réplique entièrement en métal
Une bonne base pour un custom ou un gros upgrade
Nettement moins chère que cyma -
-
04.02.2022
A écrit:
Réplique très réaliste, les finitions sont belle et c'est du véritable bois.
J'ai pu rencontrées un peux de jeux dans la crosse une fois déplier. Et je cherche comment résoudre le problème, je ne pense pas que sa soit sur toute les répliques mais un soucie a la soudure de la pièce.
J'ai acheter la réplique pour faire un custom, du coup un très bon premier prix pour faire un interne custom. Je vous conseil la réplique pour débuté ou bien faire un custom personnel de celle ci.
Nous pouvons adapter une mount QD sur la réplique car elle dispose de la plaque sur le coter de la réplique qui peux l'accueillir.
Bonne achat -
-
21.04.2021
A écrit:
Le minimum requisAvantages:Rapport qualité-prix incroyableInconvénients:
Puissance en FPS comme prévuTrès léger jeu dans le garde main inférieur mais rien de grave.
-
-
28.06.2025
A écrit:
Honestly my favourite airsoft gun so for and my first from tiwangun the double bell BY-001A or rather the aks-74u it's a realy good
Replica of the gun haven't got to use it yet in
A game looking forward to it tho. All in all a great starter gun if you want a nice piece of history. Anyway thats all stay cheeky brikei -
-
15.04.2025
A écrit:
Bought it for a friend
Nice budget ak, good for starters
It packs a punch
It feels good on hand on par with cyma
The wood is better quality than i expected
I might grab one for myself in the next sale since i want a classic lookin ak-u -
-
12.03.2025
A écrit:
Beatifull replica, full metal and wood grips. I have this replica for 3 years now. and bought it on sale for 95 euros. And it has been extremely reliable. I only changed the bucking, for a maple leaf one. the replica still works great since the day it came out of the box.
-
-
21.07.2024
A écrit:
I think for this price this is a very good replica!
For a 145 euros (when i bought it) you get a very nice ak, with no wobbly parts, and a decent FPS. I wouldn't recomended it as a starter gun, beacuse it dosen't come with cleaning rod and any nice quality box. But this is why it's only a 145 euros, and still a good replica. In my opinion its better then the cyma version, becouse of the price. One thing I would recomend is to buy a better hopup, couse the one it comes is not the best, and you not going to be that accured, but it's not that important. And maybe a sling couse the gun can get a bit heavy after holding it for a while, but pay attencion to that not every AK sling is good for it, beacuse in the front it has a very little hole for a sling. I had two games with it and it preformed without problems.
Overall this is a very solid, good preforming replica, and I recommend buying it. -
-
06.07.2024
A écrit:
The replica is very solid, no wobbly parts. With the 390 fps it shoots around 400 with a decent battery. At the triggerguard the internals are exposed, but its not seenable only, if you look from a specific angle. The replica is not the heavyest , but I would reccomend to buy a sling, cuz you might have ro hold it for hours. This is my first full metal + wood replica, and for this price its a I'm very happy with it. Fornmenthis is my second replica, and its really grate for that.
-
-
31.10.2023
A écrit:
Very tight, no rattle at all.
I only changed the magazine with a steel one.
I had a little problem with stock locking position easy solved.
Overall a good aquisition.
Sadly I didn't knew that battery is coming without charger. Now I need to buy a charger from somewhere else.
-
-
17.10.2023
A écrit:
Solid feel with full metal and real wood construction AKS-47UN for very affordable price. I shoots brilliantly considering replicas barrel length and price. In my replica there is absolutely no wobble in the folding stock nor anywhere else. It takes all of my Cyma and Arcturus magazines but does not take LCT drum magazine.
Only negatives are about assembly quality (in my example): as front of the gun is slightly misaligned iron sights are fully useless, stock is slightly misaligned and does not naturally lock in the folded position (it can however be manually locked) and selector required disassembly and reassembly for it to feel right.
I do recommend this replica, however it might require some work and a optic on a sight rail to become fully effective in the field. -
-
31.01.2023
A écrit:
Steel receiver, real wood foregrip. The rear sight base and the latching mechanism (both open and closed) and the hinge of the stock are made of pot metal. A little wobble on the stock.
Internally good parts, motor does well with the stock spring (~400 fps with .2 bbs). Ventilated aluminium piston head with full steel teeth piston. 8 mm ball bearings seem to be the weak point, I tried to replace them with the cross-pattern steel bushings, but they are too high, so the gearbox could not be closed properly. I only replaced the stock nozzle with an O-ring one and the cut off lever with a steel one. I can't review the factory hop up bucking, as I replaced it with a Maple Leaf Monster.
Additionally, the transparent hopup chamber makes it easy to upgrade with a tracer unit keeping the replica short without the use of a tracer silencer. -
-
22.11.2022
A écrit:
Perfect for the price. The main parts are made of iron, the workmanship of the wooden parts is good, it is well put together, it does not wobble or rattle. It's a solid, durable piece, it won't hurt if you drop it. Perfect for Cqb.
-
-
10.11.2022
A écrit:
Shoots fairly accurate, looks and feels amazing with the real steel and wood housing. I mounted a rails to be able to mount a sight and it looks great now. Still the old school feeling with the wood really completes the look and feel
-
-
26.03.2022
A écrit:
They are certainly a lot nicer than they used to be back in the days of DBOYS. Still not quite CYMA level, but they are cheaper than CYMA for the equivalent gun, a few little tweaks and they are potentially cracking pieces of kit. The build seemed very stable and solid enough that I would have been hard pressed to tell the difference between Double Bell and CYMA.
-
-
09.08.2024
A écrit:
-
Demander un produit
Répliques idéales pour le combat CQB — Vérifiez les autres produits de la série
-
Tactique, corps en nylon, ETU programmable
-
métal, MOSFET, sous licence
Vous économisez sur l'ensemble
- +
-
- $6.65 = $205.05
$211.70Ajouter au panier
Economisez avec l'ensemble: $6.65
- +
-
- $2.61 = $168.78
$171.39Ajouter au panier
Economisez avec l'ensemble: $2.61
- +
- +
-
- $3.41 = $175.87
$179.28Ajouter au panier
Economisez avec l'ensemble: $3.41
Réplique de la série AK fabriquée par Double Bell avec de bonnes performances et des matériaux de qualite. Le corps avec le top cover, le sélecteur, le pontet, le bouton de désengagement du chargeur, la crosse pliante, le frein de bouche sont en acier, d'autres éléments tels que le canon extérieur, la base de visée avant et arriere sont également en alliage métallique. Le garde-main est en bois, la poignée pistolet et le chargeur sont en plastique.Le mécanisme de la gearbox v3 possede un systeme de changement rapide du ressort, les engrenages sont monté sur roulements a billes de 8 mm.
Ensemble inclus:
Chaque réplique réplique passe le contrôle initial. La vérification de la puissance de tir s'effectue sur chronographe XCORTECH X3200.
Ensemble inclus:
- La réplique AK
- Un chargeur hi-cap 450 billes
Produits recommandés par nous compatibles avec la réplique :
- Chargeurs : Chargeur Mid-Cap 170 billes pour AK74 [Fuxing], Chargeru polymere 170bbs pour AK74 - Black, Chargeur métal mid-cap 125 billes AK74 [CYMA]
- Batteries : Batterie Li-Po 1400mAh 11.1V 20C - Stick [IPower], Batterie Li-Po 1200mAh 7,4V 20C [IPower]
- Chargeur de batterie : Chargeur de batterie V3+ pour batteries LiPo/LiFe [IPower]
Chaque réplique réplique passe le contrôle initial. La vérification de la puissance de tir s'effectue sur chronographe XCORTECH X3200.
Consignes de sécurité et d'utilisation
Veuillez lire les informations suivantes pour une utilisation sûre du produit :SKU: BY-001A · EAN: 5901698404031 · BY-001A - BLACK [Double Bell] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant 

Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · shop@taiwangun.com
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · shop@taiwangun.com
Fabricants:
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques
Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via shop@taiwangun.com
* Prix avec la TVA, sans les couts de transport

