+48 123626134 [email protected]
J.G. WORKS  1138 | Disponible
Notre prix*: $113.11

Choisissez votre puissance FPS:

Standard

350

1 Joule

300

+$1.00
Choisir une batterie de $11.89
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: J.G. WORKS
    Code: 1138
    EAN 5901698402372
    Poids 2850 g
    Modele de réplique Répliques Airsoft G36
    Couleur noire
    Matière ABS, aluminium
    Modele chargeur hi-cap
    Mode de tir auto, semi
    Matiere chargeur acier
    Batterie inclue NON
    Version batterie cube
    Type conneteur batterie small Tamiya
    Type cellule batterie mini
    Version gearbox v.3
    Type roulement acier bille
    Diametre roulement 8 mm
    Periode garantie 12 mois
    Ammo .20g, .23g
    Numero de serie OUI
    Longueur 810 mm
    Capacité chargeur 300 BBs
    Voltage batterie V 8,4
    Longeur canon interne 250 mm
    Energie sortie projectile 1.14 J
    Vitesse initiale 350 FPS avec billes de 0.20g
  • Opinions

    • - 24.02.2023 A écrit:
      Tres bon produit précision nickel rien a dire pour débuté c'est le meilleur tres bonne prise en main long distance et une cadence incroyable si vous commencez en airsoft je vous conseille gravement se produit cbune dinguerie simple
      Avis d'opinion: 0
    • - 11.05.2026 A écrit:
      Bought this gun for my girlfriend because it has the most value to price ratio. Very very pleased with the product, and very comfortable to use for both of us because of the adjustable stock. The gun uses M4 mags which is a hige plus so you can borroe from almost every second person at an airsoft gig. Excellent quality replica.
      Avis d'opinion: 0
    • - 03.11.2024 A écrit:
      The JG608-6 is almost a no-brainer of a garaunteed good purchase. You can buy it as starter, ir upgrade gun. It feels sturdy in the hands, it's accurate enough to outshoot the rentals and fight with the guns of mid to high tier players. The fire rate is good. The trigger response is good. By the price of only around a +/-100 bucks you are going to get your moneys worth out of it in 5 games. You can fully dissasemble it and upgrade it if desired. With the magazine adapter you can even run along your AR teammates. It's perfect with a short vertical grip.


      Pro's: Adjustable hop, quick change spring, v3 gearbox, good iron sights, m4 mag capability.

      Cons: tighten the magrelease lever screw. It might be loose. If lost can be fixed with a M1 bolt or ziptie + pen spring
      Avis d'opinion: 0
    • - 02.02.2024 A écrit:
      Works great exactly as advertised. I plan to hpa it so mainly bought it for the body. The internals are solid used it last game day with no issues. Would definitely recommend this gun if your just starting out or for a backup if yours goes down.
      Avis d'opinion: 0
    • - 23.10.2023 A écrit:
      I'm very happy with this Product, never had any problems. I am using 0,2g bbs and they are working fine, i recommend bying m4 mid cap magacines for this model
      Be careful with the NiMh accumulator because it might burn if you don't use the right charger
      Avis d'opinion: 2
    • - 17.06.2023 A écrit:
      The weapon itself is accurate and with good weight, it uses ar15 mags which is good if you use ar15. The only downside is that the butt of the weapon gets stuck easily. As a gun it is very reliable and good to use.
      Avis d'opinion: 1
    • - 26.05.2023 A écrit:
      I bought this replica as my very first gun. It has the weight of an AK and the handling of an M4. If you have a medium sized hand the fire selector might be just a bit far from you thumb, but if you practice, you'll learn how to use it easily. I use the most basic M4 style mags and it works perfectly.
      Only downside for me is that the magazine release could easily be pressed by mistake if you hold the gun by the magwell. I recommend buying a longer rail on the bottom of the handguard and putting an angled grip on it. All-in-all I would recommend buying this if you're getting into airsofting.
      Avis d'opinion: 1
    • - 10.05.2023 A écrit:
      Loved that it came with batteries and a charger. Worked great and can’t wait to go to a field with it. Highly recommend and make sure to get an eu to us adapter if you live in the USA for the battery charger.
      Avis d'opinion: 1
    • - 08.12.2022 A écrit:
      Not much to say, a JG G36 it’s a classic for a reason, it works, is accurate enough, has very decent range and comes with everything you need to get started bar BBs and the quick change spring is such an amazing addition. highly recommend!
      Avis d'opinion: 2
    • - 29.11.2022 A écrit:
      I've only used it once so far, I bought it as a pot weapon alongside the M4. It does its job perfectly and has been compatible with the existing M4 magazine, be it medium or hi, so far.

      Do tej pory użyłem go tylko raz, kupiłem go jako broń garnkową obok M4. Doskonale spełnia swoje zadanie i do tej pory był kompatybilny z istniejącym magazynkiem M4, czy to średni, czy hi.
      Avis d'opinion: 3
    • - 27.08.2021 A écrit:
      Hi people, buy G36!
      Avantages:
      Fast trigger response with 7,4v 40c Lipo battery. Solid and sturdy gun body, no wobbling on the stock. Cheaper magazines, because it eats Stanag mags.
      Very good steel gears. A decent nylon piston and the cylinder head is plastic with two o-rings, air sealing was really good.
      A REALLY fast quick spring change system, 30 seconds, and you`re done.
      G36 is perhaps the easiest gun to upgrade. You can change a better barrel and a hop-up rubber in minutes.
      Overall, good gun for a beginner, and why not for an experienced Airsofter. I highly recommend this gun, as I fully disassemble the gun and gearbox, and upgraded it.
      Inconvénients:
      The Nozzle didn`t have an o-ring. The battery compartment is so little, that I use a battery pouch, and the hop-up rubber was a lousy one.
      Avis d'opinion: 8
    Ajouter un avis
  • Demander un produit

    L’administrateur de vos données personnelles est \ KRAKMAN P.Kiepura, K.Michalik Sp. k. ayant son siège à Cracovie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Les données à caractère personnel ne seront traitées que pour établir un contact avec vous et aux fins légalement justifiées du responsable du traitement. La communication de vos données personnelles est volontaire mais également nécessaire pour vous contacter. Vous trouverez des informations détaillées sur le traitement de vos données personnelles dans notre Politique de confidentialité sur les règles de traitement des données personnelles Les champs marqués d'un (*) sont obligatoires

J.G Works G36 Ligne Classique — Vérifiez les autres produits de la série

Vous économisez sur l'ensemble



La JG 608-6 de J.G. Works est une réplique AEG basée sur une plateforme allemande dans une configuration avec puits de chargeur modifié compatible avec les chargeurs type AR15 et crosse au standard AR15. Le modele utilise le standard gearbox v3, garantissant la compatibilité avec les pieces d'entretien et d'upgrade couramment disponibles.

Construction et ergonomie

Le corps est fabriqué en polymere reproduisant la construction de l'arme d'origine. Cette version est équipée d'une crosse réglable au standard AR15, permettant d'adapter la longueur selon les préférences de l'utilisateur. La réplique dispose d'un puits de chargeur compatible AR15, augmentant la disponibilité des chargeurs et des pieces de rechange. Le sélecteur de tir ambidextre permet une manipulation confortable pour les droitiers comme pour les gauchers. La batterie se loge dans le garde-main avant. Un rail Picatinny avec poignée de transport intégrée est monté sur la partie supérieure et équipé d'organes de visée métalliques, permettant l'installation d'un point rouge. Le cache-flamme est monté sur un filetage 14 mm CCW. La réplique dispose d'un numéro de série individuel.

Mécanisme interne

Le cour de la réplique est un gearbox v3 équipé d'engrenages en acier. Le ressort installé fournit une vitesse initiale d'environ 110 m/s (environ 330-350 FPS). Le modele dispose d'un systeme de changement rapide du ressort, permettant son remplacement sans retirer le gearbox du corps. La construction reste compatible avec les pieces dédiées aux répliques basées sur un gearbox v3.

Inclus dans la boîte :

  • réplique 608-6
  • chargeur hi-cap

Accessoires recommandés:



Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: 1138 · EAN: 5901698402372 · 608-6 [J.G.Works] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport