Chargeur acier Mid-cap 150bbs pour serie AR-15/M4 - Black

J’utilise ce chargeur acier Mid-cap 150bbs pour M4 depuis plusieurs week-ends de jeu et j’en suis globalement très satisfait. La qualité de fabrication est vraiment au rendez-vous : l’acier donne un rendu très réaliste et ajoute un vrai plus en immersion, notamment lors des reloads. Il supporte très bien les manipulations rapides et les chocs légers, ce qui est rassurant pour un usage intensif en partie.
Côté performances, l’alimentation est fluide et régulière, même en rafale modérée. Je n’ai constaté aucun problème de tir à vide ni de perte de billes. Le chargeur se clipse correctement dans la réplique et reste bien en place, sans flottement. Le remplissage est assez simple avec un speedloader, même si le ressort devient logiquement un peu plus ferme sur les dernières billes.
Le seul point à prendre en compte est le poids, plus élevé que du polymère, ce qui peut se sentir quand on en emporte plusieurs sur le gilet. Mais c’est aussi ce qui fait son côté réaliste et robuste.
En résumé, un très bon chargeur mid-cap pour joueurs exigeants, fiable sur le terrain et parfaitement adapté aux séries AR-15 / M4.

Chargeur de bonne facture.
En métal, si vous en prenez plein... vous serez bien chargé :)
Je voulais quelques chose de robuste pour un look sympa pour aller avec une 249. Bon réalisme.
Ce que j’apprécie, l'emport (150, c'est pas mal), ainsi que son poids (fais plus vrai), sa robustesse (métal) et même dimension qu'un chargeur classic.

3 chargeur de haute qualité encore meilleur que ce vendu avec la réplique avec une très haute résistance physique et une capacité de bille élevée. Il sont facile à charger , nettoyer et utiliser je les recommande grandement de plus ils sont adaptable à d'autre de mes réplique ce qui les rend polyvalent en plus d'être relativement léger.

Bon chargeur,
Fourni en cadeau avec une réplique,je ne savais pas trop à quoi m'attendre, et en fin de compte agréablement surpris.
la finition et très correct et il fide bien.
Tester à 30 rps aucun soucis.
Un très bon rapport qualité/prix .

Pour ce prix, difficile de faire mieux !
Full métal, agréable au toucher et robuste.
On sent la qualité de fabrication !
S’adapte parfaitement dans ma M4 ainsi que dans mon speedloader, je recommande !

Chargeur obtenu avec un pack CYMA CM513. Rien à dire, chargeur full métal bien plus qualitatif que les plastiques ! On a quelques chose dans les mains et pas un bout de plastique qui va casser dès qu’il tombera

Chargeur acier Mid-cap 150bbs pour serie AR-15/M4 - Black
chargeur au top , tombe souvent par terre et rien ne se casse, de très bonne qualité.
adaptable facilement sur une CM.068D [CYMA].
je recommande fortement ce produit

Ce chargeur est d'une bonne qualité et correspond parfaitement a mes attentes, après l'avoir essayer en partie, il est vraiment solide et remplie parfaitement son rôle.
Le prix est correct car il reste accessible

Très bon chargeur type M4.
Coque en métal. Poids correct.
S'adapte sur tout les types de M4 apparemment.
Tester sur une AR15 cyma et GR16 Arcturus, RAS tout est OK !
A voir dans le temps si ils tiennent bien mais ils semblent vraiment solide.
Prix imbattable pour la qualité !

Super commande livraison rapide tout est conforme à la description je suis super content d’avoir commande c’est déjà la deuxième commande et tout est comme décrit la réplique a été testé et fonctionne super bien

Super commande livraison rapide tout est conforme à la description je suis super content d’avoir commande c’est déjà la deuxième commande et tout est comme décrit la réplique a été testé et fonctionne super bien

J'en ai acheté 3 pour ma réplique double eagle M904G. Ils sont compatibles et il n'y a pas de jeu avec le chargeur. Seul petit bémol, lorsque vous appuyez sur le bouton d'éjection, le chargeur ne tombe pas. Il faut appuyer et tirer manuellement. Sinon aucun soucis, livraison rapide. Comme d'habitude c'est nickel

The product is really good.
Its working well with a vfc hk416.
Not any többlet with the feedig and the magazine material is really good, and strand.
I dropped it sometimes, but not any damage so im absolutely recommend to use this!

The free magazine gift is so kind of them
The free gift magazine was a nice surprise. It fits well, feeds properly, and works just as good as the main magazines. Build quality is decent and it’s been reliable so far. Definitely a great extra to include and much appreciated.

The magazines are solid and reliable. They fit perfectly in the MK18 with no wobble and feed consistently without any issues. Build quality feels good and durable, and they’re easy to load and use during games. Overall, they do exactly what they’re supposed to do and I’m very happy with them.

This M4 magazine is fantastic! Holds 150 rounds and isn’t made from cheap plastic—you can really feel the quality. It’s sturdy, reliable, and gives a premium feel in your hands. Definitely a great upgrade for anyone looking for durability and smooth performance in the field.

Its a really good magazine me and my cousin use it we have togather like 8 its durable thanks to its metal material it fita 150 bbs at a time its easy to load whit any speedloader once i dropped it from 5 meters it had no problem it only got dusty a bit and had a small scratch

Great mag, solid build quality and feeds perfectly. 10/10 would recommend
(tried on a delta armory m4 cyma m4 and the asar arms m4 upgraded)
Also almost no scratches after longer use and there is almost no wiggle with any of the guns

These steel mid-cap mags are top quality! Feed flawlessly with no jams, feel super solid and durable, and have a great weight to them. They fit perfectly in my AEG and add that realistic, rugged vibe. Total game-changer!

Great choice for everyone including starters. Steel magazine made for M4 replicas is very sturdy and functional elements of your loadout. Do not forget to buy silicon oil to keep your magazines maintained.

Great choice for everyone including starters. Steel magazine made for M4 replicas is very sturdy and functional elements of your loadout. Do not forget to buy silicon oil to keep your magazines maintained.

Great choice for everyone including starters. Steel magazine made for M4 replicas is very sturdy and functional elements of your loadout. Do not forget to buy silicon oil to keep your magazines maintained.

This magazine has worked perfectly for me so far. It feels solid and well-built, with durable materials that hold up well to regular use. I haven’t run into any issues, no feeding problems or jams. It loads easily, fits the gun properly, and feeds BBs smoothly during use. Overall, it’s a reliable magazine that does its job without any trouble.

Love these mags. Really good quality and the metal is really nice on a mag. Bbs load up very good on these too. If you have a m4 and in need of extra magazines, look no further. Would buy again if I need more mags.

Very good value magazines. Fits all my M4 rifles

Good performance, i have had no issues

It's made out of metal, so if you want more realistic look, these are definately the ones to chose.

The capacity seems to be true. Around 130-150BB should fit inside.

This mid-cap magazine came as a free gift with a Cyma Platinum M4, it works perfectly, it's rock solid. If you like metal magazines like me, this one is a must have for your Cyma. I'm very happy with it.

Magazine came as a free gift when I purchased my replica, it fits and functions well in a CYMA platinum, G&G CM16, and an old Tokyo Marui XM177 from the late 90s. I will be purchasing more in the future to replace my old plastic mid-caps

The mag loads well, looks amazing, and feels great. Couldn’t be happier. Do note that this one doesn’t have the wheel on the bottom so a speed loader is recommended.

The metal construction looks and feels like a real magazine, the paint seems to be of good quality. Haven’t tried to max out the capacity but feeds well and doesn’t rattle.

Have tried multiple M4 style mags to use with my lancer tactical and had issues with many of them with feeding the bbs. After trying these mags, i don't have any issues anymore with feeding. Added to that the metal build gives a nice classic look.

Magazine works fine, no problems, BB`s aren`t stuck, best value for money and quality! Material and build are solid!!!
I used it in intense shooting and didn`t notice any issues so far.
Highly recommended!!!

The product is excellent. I can't praise it enough, I tried it on 4 different m4 platforms and there were no problems. so I warmly recommend it to everyone. There were no problems with firing the gun

The mid cap magazine came in a VERY durable metal material, the airsoft gun comes with a plastic one though. Amazing quality and if I could buy another one, I definitely would. But I don’t know where the spiny thingy at the bottom is, and I don’t know where to put the BB’s at.

1. Build Quality and Materials
Material: The magazine is made of steel, which gives it a solid, premium feel. The metal construction offers excellent durability compared to polymer mags, ensuring it can handle drops or rough handling during games without cracking.
Finish: The matte black finish is sleek, resistant to scratches, and has a tactical aesthetic. It blends well with most AK or AR-15/M4 builds, providing a cohesive look.
2. Compatibility
Rifle Fit: This magazine is designed to be cross-compatible with both AK and AR-15/M4 platforms, which is a standout feature. However, you might need to confirm fitment for specific brands/models (e.g., CYMA, LCT, G&G).
Secure Locking: The mag locks firmly into place with minimal wobble, ensuring reliable feeding even during rapid-fire scenarios.
3. Performance
Capacity: The 150-round capacity is ideal for mid-cap users, balancing ammo availability and noise reduction (compared to high-caps). No BB rattle is a huge plus for stealthier gameplay.
Feeding Reliability: The spring tension ensures consistent feeding, even with high ROF (Rate of Fire) replicas. Testing in full-auto and semi-auto scenarios revealed smooth performance with no noticeable misfeeds or jams.
Loading Experience: As with most mid-caps, a speedloader is necessary. The mag accepts BBs smoothly, though the spring tension feels slightly tighter initially.
4. Weight and Handling
Weight: The steel construction adds some heft, which feels realistic but might not be ideal for players prioritizing lightweight loadouts. Still, the weight contributes to a sturdy, high-quality feel.
Ergonomics: The curved profile and slightly textured finish offer a secure grip, even with gloves on.
5. Durability
Drop Test: The magazine holds up well to drops on hard surfaces, with no deformation or performance issues. This makes it suitable for airsofters who play in rough outdoor environments.
Weather Resistance: The steel body resists light rain and dirt effectively, but it’s recommended to dry and oil the magazine after exposure to wet conditions to prevent rust.
6. Price and Value
Cost: For a steel mid-cap mag, the price is competitive and offers great value for its durability and reliability. It’s a worthwhile investment for players who want to avoid the hassle of high-caps while benefiting from robust construction.
Comparison: Compared to polymer mid-caps, this steel magazine offers better longevity but at a slightly higher cost and weight.

I recently got my hands on the CYMA mid-cap steel magazine for my airsoft rifle, and so far, it seems like a great purchase! While I haven’t had the chance to test it out in an actual game yet, my initial impressions from trying it at home are very positive.

The build quality feels solid and reliable, with the steel construction adding a nice weight and a premium feel compared to cheaper plastic alternatives. The feeding mechanism works smoothly during my home tests, and it fits perfectly into my rifle without any wobble.

A very nice feeling mag. They also work perfectly with my Cyma M4, as one would expect, but they do have quite a lot of wobble in the magwell I've put a tiny bit of velcro tape (the soft side) near the top of the mag, then shaved the velcro down a bit, to give it a tighter fit. Not the most glamourous solution, but it can't be seen once the mag is inserted.

it fits very well wit my DE m906B better than the factory magasine. it's metal sounds nice. i'cant compare with other mags but feeds single and auto without problem. Cyma is a good company produce nice stuff.

This magazine was recommende with the JG608-6. They work. If you're on a budget, you dont need the expensiver polyner mags. They're made out of steel. They wont crack or break when dropped. Great starter mags.

High quality mid-cap AR-15 steel mags, what else? Go for the classic look to get a very reliable and robust mag that won't betray you like your last ex and that will last longer than any stable relationship you got! Oh and you don't get the maraca style sound of a high-cap mag ;)

I bought 2 of these magazines when I bought my AX//15. The shop crew recommended them as a best fit for my replica, and it is indeed a best fit.
Very solid and sturdy build, the design and the quality are very good, with no wobbling when I move or run with my gun.
I do recommend them for whoever interested in getting mid-cap magazines

This magazine has such a great quality, and has a very good fit in every m4/ar15 replica like my cyma cm 515. It has a good weight so if you put the magazine in your rig, it wont bother you when you running or doing spiderman movement.

I am very satisfied with it, you have already dropped it and there is nothing wrong with it, it works perfectly. I will definitely order more magazines in my next order because I still need such good magazines. Fits the gun very well.

Had very tough time for finding magazines for SA-H03, All H series guns have mag compatibility problem. Finaly found this CYMA magazine and it fits perfectly. A bit more loose then the original magazine but retains well and feeds with no issues.

Ottimo caricatore...pesca tutti i pallini inseriti...nel mio caso su 416 A5 geisselle specna arms ho dovuto allargare l'aggancio del mag...nulla di grave...cinque stelle d'obbligo...sicuramente comprerò di nuovo questo caricatore...acquistati sei pezzi...capacità di utilizzo di circa 100-110 pallini...

Great steel durable mag that is very durable and can take a drop and a beating during the gameplay. It feeds well even at high rate of fire. I bought this for CM.097 and it fits perfectly. One of the best mags you can get for any Cyma brand of M4 platform.

I didn't buy it for myself because I don't use mid-caps, but my teammate has been using the magazines ever since and is very satisfied with them. Not a single one has broken, even though it is used weekly and takes quite a lot of shots at close range at a CQB course. A reliable product.

Metal lowcaps from Cyma are simply the ones you have to buy. They work flawlessly whatever brand is your replica, they never misfeed and they are rock solid. I personally suggest not to load them completely, for example, I load these 150rd with 120rds, this way the springs will last longer

Great and reliable midcap.
It's going to be a struggle writing 200 words about this magazine but I'll give it a go, the bb pressure is good, I've tried it ut in a m249, APS UAR, S&T mk46 and several cyma m4s and it fed them all.

These are my second set of magazines. The other ones are way worse quality and had feeding problems. I did not had any problems with these.
They are very durable, the have been shot, dropped... no damge. Works perfectly

This is my second set of magazines, the other one was way worse qualityand had feeding problems, with these I didn't had any problems at this point. They are very durable, they have been shot, dropped...no damage. Work perfectly.

Great mag, used them for a long time and just bought some new ones. It holds a little bit less than 150 by my experience (about 140 or so) but its not a big deal. They feed properly, never had technical issues with them. As far as i know it worked in every replica i tried.

Constructed with high-quality steel, it offers enhanced durability and a realistic weight. The mid-capacity design eliminates the need for winding, providing a more immersive gameplay experience. With a 150-round capacity, it strikes a balance between ammo capacity and realism. The compatibility with both AK and AR-15/M4 platforms adds versatility to your loadout.

This mid-cap feels sturdy and fits well in multiple M4 models. It feeds well even after multiple refills. The magazines can withstand rough handling. It offers the best price/quality ratio among all magazines. I recommend it!

I bought the set (9+1) which you can see if you scroll down a bit. Essentially you get a mag for free so it's a really good deal. These mags won't fail you, every single one fits in every m4 gun we have on the field. The only thing to watch out for is, some magazines will fit 130 bbs, some will fit 140-150, but we got one that only fit 80.

The magazines are very well made. I bought over 20 magazines so far and each and every fitted well in my M4. The only issue i encountered is the inconsistentcy of how many BBs fit into it. Most will fit 130+ but one or two mags only fit in 80-90 and you need to replace the spring. Overall you wont find a better price/performance for m4 mags.

The magazine is made of metal and its quality is excellent compared to its price. The magazine works great with my gun (Cyma CM.508) and is a great addition to my recently purchased vest. It's great that you can buy such a quality product at such an affordable price, I recommend it to everyone.

A real solid magazine, feels very nice in hand, performs as it should. Problem I found when buying 2 of them, 1 fits nicely and another needs a stronger push. It seems there is small difference in outer dimensions, but after some usage it should not be an issues.

Árához képest meglepő hogy fém a külseje.
Tökéletesen működik, nem tapasztaltam adagolási problémát.

It's surprising that the exterior is made of metal considering its price.
It works perfectly, and I haven't experienced any feeding problems.

Hard to believe that a mag like this, made of metal, is so cheap but works so well. Had no feeding issues and it slides in and out of the gun with ease. Ordering 3 more as soon as the check comes in.

presi altri 5 in quanto pescano su qualsiasi replica senza problemi
molla molto dura permettono un pescaggio fluido anche a rof elevati
essendo in metallo si agganciano perfettamente anche su gusci vfc/specna....

A best buy mid-cap magazine for M4 Cyma AEG rifles:
- Low price,
- smooth performance (no feeding issue), good fit and good match with my Cyma rifle.
- good material choice, well-built (made of steel).
Recommended

best M4 mag, hands down.
feeds without problems, cheap, metal.
what's not to like?

These m4 mags are SOLID! They feel like theyre built very well. Affordable. They fit and feed perfectly in my specna arms one SA-b16. Both with the SLONG hopup house and specnas original hopup housing.
They are a little too black in the color, but I painted mine. The finnish feels good, not scratchy and rough like they can be sometimes.

the mag was cheap, so I thought why not try it. the quality of the mag is amazing. I did not expect it. it fits perfectly between 140 and 150 bbs. I did not have any problems with the feeding. the mag fell to the ground several times, but there was not the slightest scratch or any other problem on it

Naja was soll ich sagen ich dachte ich seh nicht recht. M4 Midcap Magazine aus Metall für so wenig Geld meine, Erwartungshaltung war dementsprechend nicht sonderlich hoch. Allerdings machen die optisch einen sehr guten Eindruck und beide Magazine feeden problemlos. Wenn sie jetzt noch den Langzeittest bestehen gibts für mich keinen Grund mehr den doppelten oder dreifachen Preis woanders zu bezahlen.

These magazines are excellent. So far they've been durable and reliable. I like the weight to them as well. The function flawlessly in all of my AR platforms. I will definitely be buying more in the future.

Delivered very quickly very quality steel fits perfectly into the Mk12 model I own and does not feel too loose, light weight and is very easy to load and maintain

When I first loaded the magazine not all bbs were properly being fed into the gun but after shooting it a bit more it started feeding them perfectly they also fit in my pouches perfectly and don't jump out great product 10/10.

Great midcap mags that fit perfectly in my M4 replica. I like the metal feel that completes my metal replica.

Having used these magazines without feeding trouble keeps me a happy customer.

Excellent (5 mags) fit and feeding on a CYMA cm.631. I can fit about 130 bb's after using them for a while and I have actually paired them up the brand new Novritsch SSR-4. Oddly enough at full-auto this magazine will fully empty on the SSR-4.

Fits perfectly on my CM16 Raider L 2.0E with MAXX PRO HopUp. Looks like quality due to it being metal Can't wait to test them on the field!

Pros
- Cheap
- Build quality

Cons
- Can't see when the mag is fully loaded (small clear window to see if the spring is fully filled.)

It’s great magazine. I’ve had mine for over a month now, and they are working great. Where I play it’s very dusty, and I have dropped these magazines in the sand several times and they still feed well. If they ever don’t feed it’s easy to clean these and get them back in commission. I highly recommend. Metal frame and polymer internals

I'm using these on a Specna Arms MK18 Core 2.0.

Had some issues on feeding, but it was fixed with cleaning the magazine.

So solid mags from cyma, i recommend cleaning the mags before using (I had some wires grease in them)

The Cyma 150rd Mid-Cap steel magazine for AK AR-15/M4 - Black was a great companion piece for my CM.105 DDM4A1, the only drawback I can find is that it is weighty. Since the AEG is already a heavy boy this might be a reason to opt for plastic mags.

Good and cheap mags. Using them on my DE m904a they work flawlessly. Very tight fit in the mag well makes everything feel solid.

Pros:
Cheap
Solid
Works without a flaw

Cons:
Honestly cant find one. For the money you get metal mags with no rattle ot bbs.

Perfect fit and feeds lovely!!!Metal body of the mag can really take some hits without any problems!If you are used in quick reloads letting the mag fall-then that's a mag for you!!!Will come back for more soon taiwan gun!

Best mid-cap magazine if you are using M4/AR15, its cheap and its out of steel.

Never had any feeding problems, worked perfectly
and you can feel the quality in your hands.

This mag is perfect for any AR replica, it has nice metal, and it works really well, it feels nice, and has great quality. The bb's feed well into my double eagle honey badger, and it's my main mag.
Overall great product for the price.