[Set] CM.621 Mosfet Edition - Black [CYMA] + Support Fore Grip - Black [FMA]

This foregrip feels very solid once mounted and greatly improves the handling of my rifle. It provides a comfortable grip, helps with weapon control during rapid movement, and doesn't wobble at all. The polymer feels durable and installation only took a few minutes. Great accessory that makes the rifle much more comfortable to use.

The idea to buy this foregrip came from COD MW DMZ. I was very satisfied how good it feels on the gun. The grip is quite firm and sits very tight on the picatinny rail. I would recommend for befinners and seasoned airsoft players as well. Also very food because it does not bloc your hand too much.

Nice feel on the hand and very tight fit. However its geometry does not allow it to be installed on certain handguards as the side wings might block with the handguard. This was the problem on the Arcturus AK12, which this was intended for. For less chunky handguards like M4s this is perfect

The FMA Support Fore Grip in black is a lightweight and affordable angled foregrip designed for airsoft rifles using standard Picatinny rails. Made from durable polymer, it feels simple but solid in hand, offering a good balance between weight reduction and stability. Once mounted, it provides a noticeably more comfortable and natural grip compared to holding the handguard directly, especially during longer skirmishes.

In use, the angled design helps improve weapon control and reduces wrist fatigue, allowing for a more relaxed “C-clamp” style grip that many players prefer for better handling and faster target transitions. The textured surface also adds extra security, preventing slipping even in dynamic movement or wet conditions.

Installation is straightforward, although the fit on the rail can be quite tight, which ensures stability but may require some effort when attaching or removing it.

Overall, this is a budget-friendly and practical accessory. It doesn’t offer advanced features, but it delivers exactly what it should: improved ergonomics, better control, and reliable performance for everyday airsoft use.

I use this angled grip on my WE09K replica, and I am very satisfied with it. The biggest advantage is how comfortable it feels. The ergonomic design provides a secure and natural grip, which makes handling the rifle much easier and improves overall control. Even after a long day of gameplay, it doesn’t become uncomfortable or tiring to use.
In terms of value for money, I think this is one of the best angled grips available. It feels solid and stable once mounted on the Picatinny rail.
The only downside is that it can fit very tightly on the replica. While this ensures stability, it also makes it a bit difficult to remove.
Overall, I would definitely recommend it to anyone looking for a comfortable and affordable angled foregrip.

Feels really sturdy on my Daniel Defense MK18. It doesn't wobble at all, which some have stated it would. Easy to install and makes for a perfect C-clamp-esque grip technique. Feels more comfortable than the vertical grips I've tried.

This AEG foregrip is a game-changer! Feels solid and super comfortable, giving me way better control and stability during fast-paced matches. Easy to mount, fits perfectly, and adds a badass tactical look. Definitely worth it!

Simple plastic angled handle grip for your gun. To avoid my mistake, make sure that your gun has rails under the barrel, otherwise only place where you will be able to place it is next to your sight which is not very useful.

Very good replica. Not heavy ( 2 kg only) and easy to run with it. The red dot I attached fits perfect. Battery is not included in the set, so you have to buy one and a charger as well! I like this replica very much!

Good quality, however didn't fit lower rail of my JG082 S-552 Commando II, potentially might not fit if there's not enough clearance in front or in the back of the picatinny rail. Might also look if you have enough space between the body of the gun and rail itself, might also not fit if tight fit, grip slides onto it and requires surprising amount of space to fit.

Foregrip works as intended, it is plastic, secures good into place. I consider it a good purchase for under 10 euros. It really helps when gripping a gun especially around corner. I would recommend this buy for everyone.

Really good Gun. Everything you need for beginner/semi advanced Aisofter or „backup“/reserve in Case of need. Only thing is that the Body is NonMetall but in this price area absolutely top!! With the MosFet a nice Extra

I'm a beginner at Airsoft but this replica is beyond perfect as a starter gun. It is very accurate and it's weight is very light. You can easily hold it in a 3 hour session and it's very comfortable. The quality of the structure is really good.
I'm very pleased of this purchase and definitely recommend this replica.

Lightweight, simple, reliable and affordable. Nothing else to say.
May be a bit tight when installing for the first time.
Do consider how you reload while positioning (if you use AK or smth other than AR platform)

Its ergonomic design offers a comfortable and secure hold, minimizing fatigue during extended use. The textured surface provides a non-slip grip, even in wet conditions. With its quick-detach mechanism, it allows for easy installation and removal. Whether you're engaging in precision shooting or tactical operations, this fore grip enhances stability and control, resulting in improved accuracy and performance.

Honestly, it's a pretty ok foregrip, you get what you pay for. It does the job and it does it well. However, it was a massive pain to put it on at first, as it is incredibly tight. I injured myself a few times while trying to put it on. 4 stars!

+ Cheap
+ Good grip on hands
+ Looks sturdy

- Doesn't fit correctly on picatiny rail and rattles
- Mounting is slow and can't be done on field
- Held in place with flat head screw

I won't use it unless I find a way to modify it so it won't rattle on picatiny rails.

Price to performance is stellar. It fits like a glove. With my mid-sized hands it handles really well, and I can imagine people with both large and small hands will think the same!

If you are thinking of getting one, do it! In my next order I will get me a second one.

Steady and cheap foregrip, feels good in the hand!
Tight fit on the rail and easy to install.

This grip is quite comfortable. Stays well put and doesn't wobble around. Fits perfectly the front (short) rail of a G36. Would work fine as shown in the picture - right in front of the mag well.

Strong, comfortable foregrip with built-in handstop at the end. It is easy to install. Once it fits, it doesn't jiggle, rattle or sits loose.
I put this on my UTR and can say that I will never take it off. Looks cool for sure, but the added comfort and stability is a night and day difference.
Plus it's cheap AF so yeah, if you're in doubt, go ahead. You will not be sorry you bought it :)

I bought this gun to get into this hobby. After my first game day its safe to say it was a great purchase.
The replica was easy to handle and run around with, and the adjustable stock made it more comfortable in CQB matches.
It didnt jam, always fired. Reliable.
One notable thing is that the gun didnt come with a detailed instruction on how to operate it, put in the battery, change hop up etc, etc...(thats why only 4 stars) which for me who was not really familiar with these at the time made it difficult to learn how to do all these stuff. Luckily you can find many videos on this particular replica so you can get the hang of it even without description.

Really great grip, a bit on the wider side I would say, but for me - I have big hands - they worked perfectly. Only tested it in one game so far but was really pleased with it, really well built and solid when you put it on the gun's rails.

The Support Fore Grip from FMA is an excellent choice for airsoft players looking for reliable and versatile grip options. Its vertical angled design provides a comfortable and stable grip, while the durable construction ensures long-lasting performance. The grip is easy to install and compatible with most airsoft guns, making it a great addition to any player's loadout. Overall, a top-quality product from FMA.

Good weapon for start but the plastic rail not to durable. I orderd on it a holographic sight but every time if i move the weapon the sight falls down. I think is a good weapon for first but is you want a long-term weapon, buy other one.

You get a mosfet and it's wired to deans for an entry level gun cost can't beat a deal like that order came fast the gun is an m4 platform so completely and easily customizable would recommend as a beginner or a base for a project replica

The grip is comfortable to hold.

The fit on a standard picatinny rail is extremely tight. While it did require the use of a rubber mallet to position to grip, it will definitely stay on there with good stability.

Very good product highly recommend
You should buy from Taiwangun since they have the best products on the market at affordable prices! Bought many products from them for me and my friends and we never got disappointed once :)

Got this gun last month and I’m really happy with it. I got it with a 11volt battery and it works perfect. Downside is the full plastic body but it is the best plastic body you can get for this price.

The replica works great.
Mine has the FPS set at around 408-410fps. Shoots very far and also accurately.
The gun makes a Gameboy alike sound when connecting the battery. ;D Cool stuff.
The looks of this gun in person are way better than I expected. One of the best beginner AEG's.

With an 11.1V LiPo this gun can sound like an A-10 right out the box. Great gun with great build and material. The keymod rails can get loose after a while, then you have to tighten them again.

Advantages:
Great build and material, no creaking.
Very good gun out of the box.
Accurate and precise.
Very light gun, extra nice in CQB

Disadvantages:
Keymod rails get loose after a while
You need a cranestock / nunchuck battery for it to fit good in the stock

I am very happy with this replica it shoots/feed well the only thing what I don't like is that the plastic feels not solid, but it is solid I thought at first that it felt fragile but for this price I can understand it is a great price for a great replica I played a few games with it, very reliable!

French and English

ma première réplique, et pas déçu d'avoir commencé avec celle-ci, elle tiens bien face a des répliques plus haute gamme (elle n'as pas à rougir face à la saigo bushido de mon ami, sauf peut-être sur la cadence de tir) je n'ai jamais modifié l'interne pour l'instant, car dans l'état actuel, elle fait largement le travail, le changement de ressort rapide fait très bien son office, la seule ombre au tableau est le garde main avant, qui est très légèrement désaxé par rapport au receveur, ça n'influe pas sur le canon, heureusement, le matériau choisi ne doit pas y être étranger, et les rails picatiny fournis peuvent ne pas tenir assez fermement dans leurs emplacement, c'est peut-être seulement mon exemplaire qui a ces défaut, mais au moins vous saurez que ça peut arriver.

Mis à part ces défauts sur le garde mains, compte tenus des performances et du prix, cette un bon choix comme première réplique airsoft...

my first replica, and i'm not disappointed to have started with this one, it stands well against more expensive replicas (it does not have to blush against the saigo bushido of my friend, except maybe on the rate of fire) I have never modified the internal for the moment, because in the current state, it does not need it work, the rapid change of spring does its function very well.

The only thing i don't like is the front hand guard, which is slightly out of sync with the receiver, it does not affect the barrel, fortunately and picatiny rails provided may not hold firmly enough in their positions, maybe it's only mine who have those problems, but at least i would know that this could happen.

even whit those handguard defaults, considering the performances and the price, it is a good choice as a first airsoft gun...

great

A perfect entry-level/beginner gun. It's solid, reliable and a joy to play with.

Solid-body with very little movement and no rattle. Good consistent Chrono, can take a bashing on the field. Fairly responsive trigger,.

The battery compartment is a bit tight, meaning that you need to fiddle a little with it to ensure no wires are pinched.

After a couple months using the CM-621, it has proven to be an excelent and reliable gun. And with mosfet, hi-torque motor and 6.03 barrel already installed, it is hard to find anything better in this price range. Even if the body is entirely made of plastic it is built strong, considering i had an accident in one game and the entire front half of the gun ended up bent, but with only little dissasemblyng and reassemblyng it is again working just as new.

Good performance
Reliable and affordable
Lightweight but still strong

Gearbox is a bit loud