[Set] AR15 Lite CQB AT-NY03-CQ [Arcturus] + Scope Victoptics S6 1-6x24 [Vector Optics]

There's really nothing negative to say about this optic. It does everything you'd want an LPVO to do and it's quite affordable. I guess the only thing that's "bad" about is that it's so good that almost everyone runs it as their go-to LPVO.

Lunette qui vaut largement son prix, le rétro éclairage est parfait, la vision et le zoom aussi.
Rapport qualité prix incroyable et protection en plus qui est fournie est nickel.
Pour de la marque en plus je peux que être satisfait du produit

Ok I seen many optics before but this lpvois amazing outstanding I recommend someone who is looking to see far and wide get this lpvo the glass quality is on par with sigs and it almost has true zero 1 to 6 yes 98/100 rateing very impressive

I was afraid to order, but I did it through PayPal and everything was fine. It arrived very quickly and I liked all the products

Best LPVO I've had the pleasure of dealing with. Victopics are a class that aren't beaten, holds zero on a GBBR very well.

Also comes with a killash for free which isn't mentioned much. Very good value for the money and the best starter long range optic.

Haven't tested it in the field yet only examined it vs. other LPVO-s that I have used...

I am comparing it to the Forrester 1-5X24 LPVO that I have been using for a year now on my primary replica.

The eye relief is a bit better here, and there is less present blur on max magnification. The reticle is nice and only the center horseshoe is eliminated which is nice. But I still prefer the "red dot" type on the Forrester 1-5X24.

Throw/zoom lever is also a bit longer than I'm used to from other LPVO-s, kind of feels I will be snagging it on something when sneaking around, but the zoom control is very nice because of the longer lever due to it. No question there. :)

In the package there is also a killflash included, and a plastic tool for opening turrets. This eliminates need for separate purchase and can act as a BB shield as well. Very nice!

S6 1-6x24 LPVO is probably the best bang for the buck to anyone looking for a DMR scope. If you want a red dot reticle on your LPVO get the Forrester 1-5X24. Else this is the one you should be looking for.

Recommended!

Vector optics can change their name all they want but they still make good optics that are somehow dirt cheap. The glass is nice and clear, the reticle is nice and thin , the turrets lock good and there was even a killflash included in the box for just over a hundred euros. Super happy with it.

Good scope for airsoft, looks really cool.
Works well as a red dot if you leave the front cover on (and use both eyes).
My two issues with it are:
- it has some chromatic aberrations at high magnifications;
- the illumination of the reticle is not the best in the bright summer sun.
One of the best scopes you'll get for this amount of money.

The replica is awesome! We ordered 3 replicas, on suggestion from friend who already has one for a year - and the qualitiy is perfect. We upgraded perun mosfet on all of them, and paid for installing it in gun.One down side for my order is that, on one of the gunns we also paid for re shimming but we could not find out what gun has been reshimmed..

This was my first replica.
Very happy vith the quality, the materials and the performance.
The desing is modern and unique.
I think I couldn't have made a better deal at this price-point.
100% satisfied.

Clean picture and really nice reticle in scope, if you've used the cheaper version of similar optics this one has much better eye relief than others I have. Delivery was quick to be sent out alongside a gun with upgrades.

If you want to watch an in depth review, it is available in my YouTube channel. I'll provide a direct link to my video here;
https://youtu.be/8IBXhqMC4hU?si=_QOjgiqwsvW_xuRf

External Overview
BOX
The box we are greeted with is a stylish mainly white themed one, with the company logos, has a matte finish and depicts an operator, his head on the front and his torso on the back. Opening the box, we find a brochure which informs as about some other replicas from Arcturus. Even the brochure has a premium feeling and the quality seems awesome. Removing the foam panel, we get to the main part of the box. The package includes;
The replica
A cleaning / unjamming rod
A mid-cap / real-cap magazine
A manual obviously
A chrono test result
A bag that includes an Arcturus patch, a magnet and more importantly a Deans to Tamiya connector for those who use a small Tamiya type plug with their batteries.
And finally, we have a beautiful set of front and rear iron sights and the Alen key that is required to install them and an Alen key that is bigger, and I still don’t know what it’s used for. I love it when companies include tools with their products.
REPLICA
The replica comes with the classic matte black color that most real steel firearms and airsoft replicas come from, that gives this replica a tacti-cool vibe.
The weight sits roughly at 2,6 kilograms, which is not as noticeable as it is evenly distributed in the body of the replica. This distribution makes the replica have a premium feel and lay comfortably in your hands.
This M4 also feels extremely sturdy despite the plastic elements and shows no wobbling or crackling, which is a solid win for the company.
The pistol grip has a very interesting grip pattern that is both comfortable and grippy and the size is ideal for medium sized hands, but this doesn’t mean that people with bigger or smaller hands won’t find it comfortable.
If you want to install accessories on this M4, you have plenty of space on the massive top RIS rail compartment that consists of 40 rail parts and if you want to add accessories on the left, right, or bottom side you can easily do so as there is an M-Lok system installed. If you are a little more extreme you are able to add canned accessories like a canned grip or PEQ box, which enriches the aesthetics of the replica with a different, crazy and good vibe.
The charging handle is the classic M4 one, but this time we have a working bolt catch and two working bolt catch release buttons, that are located both on the left and on the right side of the replica, just like the magazine release buttons.
The fire selector switch is also ambidextrous and makes a satisfying click sound once you pull it, although I’m not a big fan of the wobble that the right-side selector has, and I’ll try to fix it someday.
The included iron sights are both foldable, the front is adjustable for elevation, while the rear is adjustable for windage.
One feature of this replica that surprises me in a good way, is that the factory inner barrel diameter is 6.03mm, something that makes the replica extremely accurate and most companies should implement this feature.
The v.2 gearbox that is included allows the installation of a MOSFET system such as a Kestrel v2 and others like Gate Titan, Aster, and Perun V2 Hybrid. As Taiwan gun mentions in the description of the replica “The interior of this replica has several significant advantages. It features a quick-change spring system, and both the spring guide and the piston head are equipped with bearings. The polymer piston has steel teeth that work with high-quality gears. The gears are mounted on 8 mm plain bearings (4 pieces) and 8 mm ball bearings (2 pieces). The replica has a "microswitch" trigger. The gearbox ends with a Teflon-sealed nozzle that works with a polymer "Rotary" type hop-up chamber, which houses a steel, hardened precision barrel with a diameter of 6.03 mm.” (Taken from; https://www.taiwangun.com/assault-rifle-aeg/ar15-lite-cqb-at-ny03-cq-arcturus-3).
At the end of the barrel, we find a full metal flash hider that is also held in place with an Alen screw and if removed it reveals a 14mm CCW thread to mount a flash hider or a suppressor of your preference.
The batteries can be installed inside the stock, which opens up by twisting a screw.
To gain access to the Deans connector wiring you have to remove the stock and then unscrew the stock tube cover to reveal the T connector.
Sling mounts can be located below the stock tube screw, and we can find some QD sling mount points in several places on the replica.

Materials
The replica is made from reinforced ABS, nylon, steel and aluminum.
Metal parts include;
The inner and outer barrel
The flash hider
The handguard
Cartridge ejector
Both bolt release buttons
Both magazine release buttons
Both fire selectors
The forward assist button
The rear sling mounts
The stock tube assembly
The charging handle
The trigger
Plastic parts include;
The upper and lower receiver
Both iron sights
Pistol grip
The stock
Hop up adjustment
According to the manual, to adjust the hop up you have to pull the charging handle back and then the Rotary style hop up is revealed. Then adjust to your preference.

Overall for the price it is a really solid replica, and I'd recommend it especially for begginers.

Awesome scope,have mounted it to a DD licensed cyma plat mk18 ssg. Love it, the mini screw on throw lever feels like it could break if you smack it too hard and the reticle when lit up mirrors to the right side of the reticle (not seen when light enters the scope) would love for a killflash to be included with extra honeycomb replacements to make it even more versatile. Love it and will be getting another (:

If we start off from tip to butt, the muzzle brake is threaded as well as locked by a screw which is great.

The barrel and handguard, both of which are metal, are very short and extremely efficient in CQB situations. The handguard has true M-Lok slots all around, I have a BCM handstop and a flashlight on mine. The handguard has QD sling points on 3, 6 and 9 o'clock.

The body and stock is some sort of very durable polymer, it feels very stiff and resistant to scratches or dings. It is also fully ambidextrous.

A Gens Ace 7.4V 1500mAh battery fit with no problems at all, stock can be fully extended or collapsed.

All in all, if you're looking for a very capable, well built and budget-friendly CQB rifle. This is it right here!

Very good quality LPVO , especially for the price.
It would be a better if it comes with higher scope mounts. Eye relief is wonderful and you will have no problem aiming with it.
Overall really good product and I recommend it for this price range.

The Vicoptics S6 1-6x24 is perfect scope for any DMR build or any general build that wants to use the additional advantage of further magnification.

I have been using this scope on my HPA DMR replica and it changed my playstyle completely compared to using a red-dot. While on 1x magnification you have very clear field of view and can aim on close range as easily as with a red dot, on the longer range is where this thing really shines. You can still use both of your eyes as you would with a red dot - eventhough it does take some time to get used to and to adjust the eye relief perfectly, and with its added illumination it can do everything a high end red dot can but much more!

On longer range you can use the magnification with a slight move of your finger and notice movement and enemies that otherwise would be impossible. Even the x6 zoom is very clear and easy to use during movement. This enables you to plan ahead easier and even follow up your long range shots better.

The build quality feels great and sturdy and the reticle adjustments are very precise and hold zero no matter what you do. They are also very easy to adjust on the go unlike most scopes or red-dots where you need a tool to do it. I would still recommend to use a killflash or a polycarbonate lens protector that you can very neatly hide into the exit lens flap and make it 100% bb-proof.

The extra weight is a bit of a disadvantage, but it adds to a heavy solid feel of a marksman rifle which actually feels great.

The actual and only real disadvantage of this scope is included low rise mounting rings which are completely useless. I dont understand why to even include them, would much rather have the scope without it and 5-10 eur cheaper as they are unusable. You really need to buy a higher rise mounting rings with this scope, which was my plan before buying it anyways, but something to keep in mind and bit of an added cost.

Overall its a great high end airsoft scope which can even be used on real rifles. You cant go wrong to choose this one for your marksman/DMR build and will definitely enjoy its versatility and effectivness.

The VictOptics S6 1-6x24 scope is a great budget-friendly option for airsoft and shooting. It offers clear glass, a versatile 1-6x magnification, and a durable build. While not as refined as pricier optics, it provides solid performance for the cost, making it ideal for beginners or those on a budget. I put 4 stars because of the stiffnes of the power switch.

vector optics very clear view through the optics. very precise settings, durable even with real weapons, so recommended for airsoft. the view through the optics is very wide compared to 24mm, you see a lot. small, light, very maneuverable optics do not interfere with your movement during the game and do not give out like larger optics. I am very satisfied, I recommend the purchase. the price justifies everything you get surprisingly very satisfied.

Overall an incredible LPVO, especially for such price, the picture is very clear and illumination is good. As others mentioned - mounting rings are low-profile, sometimes making it harder to use the optic.

Geart LPVO, the light for low light is perfect, I love the overall optic, the X1 and X3 are my favourites, only one thing to point out, the mout it comes with is really low profile, great for some, for me is a bit to low, overall great price for the product imo.

Great scope with a nice long eye relief. Very clear lens. Would recommend using high scope mount as the low profile is too low. Seems sturdy enough to be use on the real steel as well. Quality vs price is great as well. Shipping was fast as usually.

I bought it for a GBBR M110 DMR, it's perfect for it. It also withstands the recoil of gas weapons, which is no wonder, because it is also suitable for real firearms. It is necessary buying a new scope mount or rail riser as the factory mounting ring is quite low.

S6 1-6x24 is a good lpvo optic, what matters is that you need a airsoft gun that fires a good enough distance to use it to its full potential, if you have a m4 then you can use it for scouting too if it does not go far enough with the bb, i found it quite useful and i actually mean it. It also has a useful reticle, indicator for when it flies to side due to wind, also zero-ing the optic is easy, you dont need a screwdriver or any other tool just your hands. It can handle to 338 caliber as well, just pointing out incase you want to use it on a real gun

Awesome scope with very clear visual and perfect recticle. Looks and feels good and it holds zero on co2 powered GBBR. You have mounting rings included in the package so you don't need to buy anything elese to mount it.

I’m looked for an ar and I got recommended this brand from a friend. ( lots of good feedback)
I choose this model because I play in outdoors and indoors as well.
Disclaimer : It was the perfect pick!

The gun comes in a nice box and you get the gun, flip up sights , stickers, magazine and a patch ( It is a nice touch!:))

Out of the box: The gun feels realistic and quality.It is really sturdy, no creaks, sounds whatsoever. The body is made of polymer , but is really strong, the front is metal.
The magazine is adjustable real to mid cap. It is nice to have a mid cap as stock, also the mag is supreme than other mags that I come across.

Several games after: In the field the gun felt awesome. It has a high rate of fire with the 11v lipo(1300mah is easy fit) In the semi it is snappy. You can hit targets in the 55-65m range, after that it is harder. (I use it with 0.28g bb-s.) It is very consistent, no drops in the fps I got 393-394 fps in the crono(0.20g) This size was a perfect choice I can easily maneuver in buildings and confidently use this weapon outside as well . I fell, dropped the gun several times in matches with no problems. It Is very light so I can carry thru out a whole weekend of play and milslim events.

I really recommend this weapon who wants a reasonably priced , well made, long lasting , gearbox with quality internals, hassle free out of the box gun.
And who plays indoors and outdoors as well.

Pros:
High quality, of the box goodness, Long lasting, Light, good almost every scenario , price

Cons : the dust cover is not clicking back to place properly, limited battery space, only top rail( but you can put more rails after)

This rifle has a very realistic feel. It is also very sturdy and has an adjustable stock.

The only rhing I didnt like about it, is how tight the quick spring change nut comes out of the box. Had to use pliers to unscrew it. Ones that was done, it was so easy to replace springs.

Other than that, I liked it, and it came packages so nicely.

For the price it's really great! Great fov, clear image, ease of use. I switched from a 9x sniperscope and it's like...the world opened up completely...not just tunnelvision. I'm using it on an SRS for long range. You don't need higher zoom than 6x...trust me!
Recommended!

Wow, that's a great optic. I advise everyone. Very clean look. You can get away from both eyes. All very high quality. Dont have parralaks. The rings in the kit are quite low, I advise you to immediately take higher, but it depends on your weapon. Nice mesh. Ideal for Airsoft.

It's great. No noticable parallax. Holds zero well, not that that matters nearly as much in airsoft as it does for real-steel, but it's nice to have. Comes with a pair of sturdy feeling mount rings and covers. Absolutely worth the money