[Set] 608-4 [J.G.Works] + DMAG G36 30/130rds Variable-Cap Magazine - BK

Nagyon jó replika. Ha valaki G36ból hosszabb verziót használna csak ajánlani tudom az ára végett is. Mert ár érték aránya szerintem kiváló. Nekem van más gyártótól is hasonló, de nem tudnak többet a nagyobb összeg ellenére. Anyaga megfelelő lehet akár motoros tárall is golyó szórásra használni mivel van lába a fegyvernek. Ha valaki nem drága hosszú fegyvert szeretne jó választás.

Fits perfectly into my J.G. 608-4. You get a very good product in terms of the price you pay for it. The only downside about these magazines are the attatchment rods on the side. I never use them and one of them became loose so it rattles a bit. Never had a problem with feeding BBs so they function properly.

I bought this as my first ever replica. I have shot about 2000 BBs through it so far. Even tough it is not full metal, it feels sturdy in the hands (except for a bit of jiggling in the front cover where the battery sits). Shoots quite accurately out of the box using 0.25 BBs. You can't really go wrong with buying this in terms of the "bang-for-buck" value. The only negative thing I have to say about it is the hi-cap magazine is bad (aren't they all? :D) and the bipod you get with it is not very good so I just removed it (very easy removal, it is just being held down by a pin).
All in all, very good starting replica for the price. You just need a holo/red dot sight and a few extra mid-cap magazines and you are good to go.

I bought two g36 DOUBLE BELT guns for me and my wife we ​​go to airsoft regularly and ordered mags as they were very hard to find. We have already tested them and we are quite satisfied, I will order more of them because every soldier should have a few.Along with each magazine, they come with botafor stickers of real cartridges that you can stick on both sides.

Nice quality magazine. To change the capacity, you need to remove the bottom screw and remove the internals from the mag body. And then just slide the switch. So far I had no problems with it; feeds good and fits nicely in my replica (JG G36).

Good quality for that money, works from box but need modifications.
First of all need to change pop-up rubber, than inner barrel for more accurate aiming.
Plastic are also good.
If you need to take a start with machine gun to try, this is good choose for beginner.

after using it for 6 months:
- very good quality, no malfunctions, nothing breaks / loosens / falls apart;
- quick spring change is very handy;
- add a good scope on top and you have a nice dmr (with red dot on the side for closer distance);
- putting in bigger battery requires patience as there is little space but it is doable;
- I've replaced inner barrel and rubber for more consistency at longer distances, worth doing this upgrade as the stock barrel is 6.08;
- long (96cm) and heavy (3kg) but thats how i like it;
- only concern I may have is that the front sling mount will pop out if you hold the gun vertically barrel up, and the locking pin may get loose / the o-ring on it can wear out, so the pin may fall out and get lost, I had to get 2 spare ones so keep an eye on it;
- bipod is nice addition but there are two separate legs so it doesn't rotate / swivel so i don't use it much;
- stock battery and maybe motor are good places for upgrades as the replica whines a little;
- generally impressed and very happy, good platform for upgrades. especially for the price.

This replica is indestructible.
My local airsoft field allows this g36 to be used as an lmg, needless to say, this thing has had hundreds of thousands of rounds through it in a very short time frame and often is used for long bursts.
It has lasted flawlessly for such high wear and tear. I must give credit to Tiwangun for reshimming it well to be able to handle such pressure. The shimming was spot on,
The externals may be plastic but it hardly feels cheap, it feels nice and sturdy in the hands, with no creaking or anything like that.
The bi-pod is nice for mounting mounds or laying down, and the attention to detail on the replica is perfect, even having the mock bolt catch in the trigger guard like the real one.
Over all, I must say this is an extremely dependable replica, only made better by the great servicing done by Tiwangun.

A "DMAG G36 30/130RDS VARIABLE-CAP MAGAZINE" egy sokoldalú választás, ami háttérbe szorítja a többi alternatívát, hiszen mind mid-cap játékokon, mind real-cap milsim játékokon hasznosítható.
A G36 család előnye, hogy a valós fegyvert is ugyanúgy műanyag részek fedik, mint a replikát. Igaz ez a táraikra is. Ezzel a tárral ugyanazt a polymer eszközt fogod meg, mint a fegyver igazi használói. Kell ennél több egy valósághű hadgyakorlathoz?
A kapacitás állításához a tár belsejét tartó csavar kitekerésével, és a tárbelső kihúzásával férhetünk hozzá.

Hi!
It arrived unopened. It does its job! It doesn't get stuck, it fits perfectly! (JG) Imitation ammunition is cool. The material looks good too! It has been dropped, but it still works without problems!
I like the Real - Mid feature!

A pretty nice budget replica. The quality of the plastic is really good and the gun is solid. Even the bipod is removable. I also bought an M4 mag adapter with mine. It was easily and firmly installed. I use stanag Cyma midcaps and aBattleaxe electric drum. Both feed nicely. The only backlash of the gun is that puting back the handguard with a battery inside isn't quite easy. Other than that it's a really good value for the cost.

Great quality for a great price! Works perfectly with a JG 608-2.

As the description says: switchable low/mid cap modes.
With the stickers on, it looks like the real thing.