MK16 Saber AT-AR11 [Arcturus]

AT-AR11 is the new assault rifle of Arcturus producer that has already accustomed airsoft players to the reliability, accuracy, and durability of their replicas.

The main elements such as receivers, handguard, gas block, outer barrel, ambi charging handle and receiver extension were made of aluminum and light alloys. Smaller parts, including the flash hider, ambi magazine catch, ambi bolt catch, assist assembly, extension nut, pins and ambi end plate sling mount, as in the case of firearms were made of steel. The whole rifle is well fitted and protected against corrosion.

The reinforced gearbox with proven internal parts is the next advantage of this replica. Quick spring change system, bearing spring guide, bearing piston head, full steel teeth polycarbonate piston, steel gears mounted on 8mm steel bushing to be able to withstand the highest loads. The motor gear is mounted on ball bearings to ensure it can rotate freely at high speeds. In addition, the gearbox is equipped with a microswitch trigger, which, in combination with low-resistance wiring, works great with Li-Po batteries. The use of an electric trigger eliminates also the problem of burned out contacts and improves the response to the trigger. The replica also features a sealed teflon nozzle that works great with a polymer, rotary hop-up chamber and with a precision 6.03mm hardened steel barrel.

NOTE! The replica has a unique serial number!

The kit includes:

• 13.5" MK16 Saber replica
• folding sights
• 30/130rds variable-capacity magazine

Products recommended by us to this replica:

• magazines: MAG-M1A-BK, MAG-M1A-TN.
• accumulator: Battery Li-ion 2600 mAh 7,4V Stick - T-Plug [VB], Gens Ace 25C 1000mAh 3S1P 11.1V Airsoft LiPo Battery Gens ace G-Tech T-Plug, GEA152S25DGT, Gens Ace 25C 1000mAh 2S1P 7.4V Airsoft LiPo Battery Gens ace G-Tech T-Plug

Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.