+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

28-30mm Protection Cover Cap for Red Dot Sight [Vector Optics]

Vector Optics  SCOT-59IIQ | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: Vector Optics
    Code: SCOT-59IIQ
    EAN 6976386125528
    Poids 5 g
    Couleur noire
    Matière aluminium
    Longueur 8 mm
    Diamètre mm 31

  • Opinions

    • - 04.09.2025 A écrit:
      produit conforme a sa description. composition de qualité.
      Vector optique es une marque de référence en terme de rapport qualité prix


      Bon 1200 signe pour un commentaire sur une protection d'optique ça fait un peu beaucoup...
      Avis d'opinion: 0
    • - 29.08.2026 A écrit:
      A very inexpensive accessory that gives useful protection to a much more expensive optic. The aluminum housing feels solid and the clear acrylic lens should help protect the objective lens from direct BB impacts. It is a sensible addition for anyone using a red dot in airsoft.
      Avis d'opinion: 0
    • - 16.06.2026 A écrit:
      Solid protection, fits the Maverick Gen3 1x22. You can get it to a point where it's just tight enough to hold on under pressure, but just loose enough to be able to slide it off with just a tiny bit of force applied.
      Avis d'opinion: 0
    • - 31.12.2025 A écrit:
      I use this on my Maverick-II DBR and it is a perfect fit. I practically never take it off. Although I havent been shot on it yet it looks strong enough to withstand a hit. I would advise you buy two of these just in case your first one is shot and scratched. It does not hinder the viewing image and it is crystal clear to look through. Just be advised that this only fits on the front and not the back of the sight. I bought 3 of these with the idea of having one on the front and the back +1 replacement but the diameter of the back of the scope is different. However I am very satisfied.
      Avis d'opinion: 0
    • - 12.12.2025 A écrit:
      Its a really simple item and its working like that, you order it, take off the protective cover, put it on and fits really good on my red dot. Does not move or rattle, wont affect the image like the cheap ones for the holosights. Would recommend.
      Avis d'opinion: 0
    • - 20.10.2025 A écrit:
      Nice fitting on the victOptics T1. Just be careful tightening the screw since the thread is quite weak
      The lens come covered with a protective film.
      I said everything I wanted to say so I’m just getting to the 200 characters requested for the review
      Avis d'opinion: 0
    • - 12.06.2025 A écrit:
      The frame is a perfect fit on the Maverick gen2 1x22. Unfortunately the protective lens came with some light scratches running through the whole diameter. When light is coming from a specific angle, the refraction on the scratch becomes very disturbing. I tried to rub it with a microfiber tissue but it made it worse. I could make further scratches with my fingernail through the microfiber tissue. The lens is really soft. Trying to get sthing harder.
      Avis d'opinion: -1
      Odpowiedź sklepu:
      About the scratches, I am sure you have taken off the protective foil from it, right? Sometimes it happens that the users do not take it off. When it's not taken off, it's actually easier to create the scratches, but those scratches are only on the foil. If you have taken it down, please contact our customer service about the replacement.
    • - 08.05.2025 A écrit:
      The housing doesn't seem to have 28mm minimum radious. The glass is around 29mm and even without it, the housing seems to be a bit bigger than 28mm. However, I was still able to secure it by putting some tape on the scope first.
      Don't forget to take off the protective foil from the lenses!!! It is not that obvious but there is a foil on both sides and it is all blurry with it.
      Avis d'opinion: 1
    • - 18.03.2025 A écrit:
      That's what it is. Maverick red dot is aesthetically pleasing and perfectly protected against BBs. It is easy to install and has a noticeable quality to it. I have 2 of these now for 2 maverick red dot. I don't regret my purchase, I recommend it to everyone, it's better than the legacy red dot front mount protector.
      Avis d'opinion: 0
    • - 14.02.2025 A écrit:
      The protector fit perfectly my Maverick GenII. It is not bulky or ugly. Recommend 10/10. The glass was protected. It came with everything you need. It is worth buying for other red dots as well. Just check the size if it fits to be sure.
      Avis d'opinion: 0
    • - 12.11.2024 A écrit:
      Dont fit any of my vector optics i have, to loose.
      Says 28 mm as smallest but glas is 29 mm so no chance of adjusting to my reddots that is 28 mm.
      Nice product though if you have other reddots that it might fit.
      Avis d'opinion: 2
    • - 20.06.2024 A écrit:
      A doboz tartalmaz mindent ami a szereléshez kell.
      Én a Red dot sight T4 1X22 [Vector Optics] Optikára szereltem fel. Ebben az esetben méretbeli különbség volt de azt meglehet oldani egy kis hézagolással pl: teflon szalaggal.

      Én az optikám mindkét felére felszereltem 1-1 darabot, hogy biztosan védje azt.

      Avis d'opinion: 0
    • - 13.03.2024 A écrit:
      Perfect fit for my red dot sight. Looks great, I really hate to have the ugly protection mounted on the picatinny rail in front of the sight. Tight fit and easy to install. Fast delivery as usual from Taiwangun.
      Avis d'opinion: 0
    • - 19.01.2024 A écrit:
      I bought this product because it adds a more realistic look to my gun than a flip up shield. It is easy to mount and it's compatible to a lot of red dots. I used it on field and it got shot. You can barely see a scratch on it, so its very hard. I can definitely recommend this product to anyone. It's easier and sturdier than any D.I.Y method.
      Avis d'opinion: 0
    • - 19.12.2023 A écrit:
      Perfect for example Maverick II. Easy adjustable and quite small and light. Have only used for a couple of games, both inside and outside in the cold. No fogging and very clear and scratch resistant glass
      Avis d'opinion: 0
    • - 07.11.2023 A écrit:
      It's a bit tight on my 30mm red dot, however it still works great. I advise you to purchase a thicker lens because the original one will crack from close range shots, but overall its a nice product. For this price point it's definately worth it, and you can make new lenses easily if the original one cracks.
      Avis d'opinion: 1
    • - 25.07.2023 A écrit:
      Excellent product, for those like me, who have sights for which there are no Killflash. The product is very resistant, completely in steel. The lens is in very large plexiglass (4/5mm), it is sharp and without scratches. Vector optics, a truly excellent company with high quality products.
      Avis d'opinion: 0
    • - 06.04.2023 A écrit:
      Unfortunately did not fit my t1 optic even thought its made for it,It did fit my bushnell trophy red dot scope/optic though,for some reason,i would like a honey comb version of this,that would be amazing,as most optic protectors like this have glare in some form
      Avis d'opinion: 0
    • - 25.10.2022 A écrit:
      Works great with my knockoff t1 sight, it was a bit big for my optics but nothing an O-ring couldn't fix. The cover is allso covered with a thin plastic film to make sure it's perfect when you remove the film and assemble it on the optics
      Avis d'opinion: 0
    • - 10.12.2021 A écrit:
      Easy to install, my optic was a little smaller but I just wrapped some electric tape around and the cap fits snugly. You also have to remember to take off the plastic film on both sides of the lens or it will look blurry.
      Avis d'opinion: 2
    Ajouter un avis
Protective cover for airsoft red dot sights. Aluminum housing with 2mm clear acrylic lens. Adjusted to the outer objective lens with a diameter of 28-30mm.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: SCOT-59IIQ · EAN: 6976386125528 · 28-30mm Protection Cover Cap for Red Dot Sight [Vector Optics] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport