+48 123626134 [email protected]
Cambiar idioma a inglés Cambiar el idioma al polaco Cambiar idioma a francés Cambiar idioma a español Cambiar el idioma al alemán
RINCÓN DE PRENSA
iniciar sesión | Registro
0 0

28-30mm Protection Cover Cap for Red Dot Sight [Vector Optics]

Vector Optics  SCOT-59IIQ | Falta temporal
Artículo no disponible
¿ Cuando el producto esté disponible ?

  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Fabricante: Vector Optics
    código: SCOT-59IIQ
    EAN 6976386125528
    Peso 5 g
    Color negro
    Material aluminium
    Longitud 8 mm
    Diámetro mm 31

  • Opiniones

    • - 10.04.2025 escribió:
      Supongo que para la marca Victor óptics va perfecto, pero yo la compré para la marca Victoptics , que es la replica y es un pelin mas grande , obstante, le he podido poner un poquito de esparadrapo para así ensancharla y va perfecta
      Valoración de opinión: 0
    • - 25.09.2022 escribió:
      Had to wrap some insulating tape too, because they are big for my sight (Vortex Crossfire II). Now they fit perfectly. Quality is nice, simple and fuctional product. Looks OK and inconspicuous on the sight, but the black paint is a bit shiny in comparison to the more matte finish of the Vortex. The best part is that the acrylic protectors are super-clear and don't distort or blur the image, and I have put a pair, one on each side, lenses of the sight. Still have to see how they stand a BB impact, didn't test them, so I don't know if they are the typical cracky metacrylate that breaks at one impact, or it's super-hard polycarbonate type.
      Valoración de opinión: -1
    • - 29.08.2026 escribió:
      A very inexpensive accessory that gives useful protection to a much more expensive optic. The aluminum housing feels solid and the clear acrylic lens should help protect the objective lens from direct BB impacts. It is a sensible addition for anyone using a red dot in airsoft.
      Valoración de opinión: 0
    • - 16.06.2026 escribió:
      Solid protection, fits the Maverick Gen3 1x22. You can get it to a point where it's just tight enough to hold on under pressure, but just loose enough to be able to slide it off with just a tiny bit of force applied.
      Valoración de opinión: 0
    • - 31.12.2025 escribió:
      I use this on my Maverick-II DBR and it is a perfect fit. I practically never take it off. Although I havent been shot on it yet it looks strong enough to withstand a hit. I would advise you buy two of these just in case your first one is shot and scratched. It does not hinder the viewing image and it is crystal clear to look through. Just be advised that this only fits on the front and not the back of the sight. I bought 3 of these with the idea of having one on the front and the back +1 replacement but the diameter of the back of the scope is different. However I am very satisfied.
      Valoración de opinión: 0
    • - 12.12.2025 escribió:
      Its a really simple item and its working like that, you order it, take off the protective cover, put it on and fits really good on my red dot. Does not move or rattle, wont affect the image like the cheap ones for the holosights. Would recommend.
      Valoración de opinión: 0
    • - 20.10.2025 escribió:
      Nice fitting on the victOptics T1. Just be careful tightening the screw since the thread is quite weak
      The lens come covered with a protective film.
      I said everything I wanted to say so I’m just getting to the 200 characters requested for the review
      Valoración de opinión: 0
    • - 12.06.2025 escribió:
      The frame is a perfect fit on the Maverick gen2 1x22. Unfortunately the protective lens came with some light scratches running through the whole diameter. When light is coming from a specific angle, the refraction on the scratch becomes very disturbing. I tried to rub it with a microfiber tissue but it made it worse. I could make further scratches with my fingernail through the microfiber tissue. The lens is really soft. Trying to get sthing harder.
      Valoración de opinión: -1
      Odpowiedź sklepu:
      About the scratches, I am sure you have taken off the protective foil from it, right? Sometimes it happens that the users do not take it off. When it's not taken off, it's actually easier to create the scratches, but those scratches are only on the foil. If you have taken it down, please contact our customer service about the replacement.
    • - 08.05.2025 escribió:
      The housing doesn't seem to have 28mm minimum radious. The glass is around 29mm and even without it, the housing seems to be a bit bigger than 28mm. However, I was still able to secure it by putting some tape on the scope first.
      Don't forget to take off the protective foil from the lenses!!! It is not that obvious but there is a foil on both sides and it is all blurry with it.
      Valoración de opinión: 1
    • - 18.03.2025 escribió:
      That's what it is. Maverick red dot is aesthetically pleasing and perfectly protected against BBs. It is easy to install and has a noticeable quality to it. I have 2 of these now for 2 maverick red dot. I don't regret my purchase, I recommend it to everyone, it's better than the legacy red dot front mount protector.
      Valoración de opinión: 0
    • - 14.02.2025 escribió:
      The protector fit perfectly my Maverick GenII. It is not bulky or ugly. Recommend 10/10. The glass was protected. It came with everything you need. It is worth buying for other red dots as well. Just check the size if it fits to be sure.
      Valoración de opinión: 0
    • - 12.11.2024 escribió:
      Dont fit any of my vector optics i have, to loose.
      Says 28 mm as smallest but glas is 29 mm so no chance of adjusting to my reddots that is 28 mm.
      Nice product though if you have other reddots that it might fit.
      Valoración de opinión: 2
    • - 20.06.2024 escribió:
      A doboz tartalmaz mindent ami a szereléshez kell.
      Én a Red dot sight T4 1X22 [Vector Optics] Optikára szereltem fel. Ebben az esetben méretbeli különbség volt de azt meglehet oldani egy kis hézagolással pl: teflon szalaggal.

      Én az optikám mindkét felére felszereltem 1-1 darabot, hogy biztosan védje azt.

      Valoración de opinión: 0
    • - 13.03.2024 escribió:
      Perfect fit for my red dot sight. Looks great, I really hate to have the ugly protection mounted on the picatinny rail in front of the sight. Tight fit and easy to install. Fast delivery as usual from Taiwangun.
      Valoración de opinión: 0
    • - 19.01.2024 escribió:
      I bought this product because it adds a more realistic look to my gun than a flip up shield. It is easy to mount and it's compatible to a lot of red dots. I used it on field and it got shot. You can barely see a scratch on it, so its very hard. I can definitely recommend this product to anyone. It's easier and sturdier than any D.I.Y method.
      Valoración de opinión: 0
    • - 19.12.2023 escribió:
      Perfect for example Maverick II. Easy adjustable and quite small and light. Have only used for a couple of games, both inside and outside in the cold. No fogging and very clear and scratch resistant glass
      Valoración de opinión: 0
    • - 07.11.2023 escribió:
      It's a bit tight on my 30mm red dot, however it still works great. I advise you to purchase a thicker lens because the original one will crack from close range shots, but overall its a nice product. For this price point it's definately worth it, and you can make new lenses easily if the original one cracks.
      Valoración de opinión: 1
    • - 25.07.2023 escribió:
      Excellent product, for those like me, who have sights for which there are no Killflash. The product is very resistant, completely in steel. The lens is in very large plexiglass (4/5mm), it is sharp and without scratches. Vector optics, a truly excellent company with high quality products.
      Valoración de opinión: 0
    • - 06.04.2023 escribió:
      Unfortunately did not fit my t1 optic even thought its made for it,It did fit my bushnell trophy red dot scope/optic though,for some reason,i would like a honey comb version of this,that would be amazing,as most optic protectors like this have glare in some form
      Valoración de opinión: 0
    • - 25.10.2022 escribió:
      Works great with my knockoff t1 sight, it was a bit big for my optics but nothing an O-ring couldn't fix. The cover is allso covered with a thin plastic film to make sure it's perfect when you remove the film and assemble it on the optics
      Valoración de opinión: 0
    • - 10.12.2021 escribió:
      Easy to install, my optic was a little smaller but I just wrapped some electric tape around and the cap fits snugly. You also have to remember to take off the plastic film on both sides of the lens or it will look blurry.
      Valoración de opinión: 2
    Añadir una opinión
Protective cover for airsoft red dot sights. Aluminum housing with 2mm clear acrylic lens. Adjusted to the outer objective lens with a diameter of 28-30mm.


Directrices de seguridad y uso

Lea la siguiente información para un uso seguro del producto:
SKU: SCOT-59IIQ · EAN: 6976386125528 · 28-30mm Protection Cover Cap for Red Dot Sight [Vector Optics] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.