[Ensemble] Réplique Sniper Airsoft Spring SVD (Real Wood) [Snow Wolf] + Viseur optique 4x24 pour SVD/SVU [S&T]

La lunette en elle même est bien faite dans l'ensemble : métal, le réticule est bien refait et l'illumination marche bien, mais un enfer pour l'installation sur une réplique : le ressort qui est sensé glisser de manière fluide sur le rail bloque complètement et empêche l'installation, je suis obligé d'utiliser des outils pour retirer le bout de métal qui dépasse. Encore si ce n'était que sa pourquoi pas mais le problème c'est que sa ne vaut pas du tout le prix de 125€. Je ne conseille pas cette lunette a ce prix là.

Un enfer à installer, j’ai du fixer la lunette avec des cols son environ 8-9 pour que ça ne bouge plus, plus de la corde.

Le mécanisme est vraiment mal foutu je vous déconseille d’acheter cette lunette qui est beaucoup trop cher pour ce que c’est.

THe exterior is not the best quality but remains correct.

On the other hand I was very disappointed by the internals. upon receipt of the replica and when passing chrony, it was very irregular, going from 400fps to 230fps.

I had to disassemble it to find that the cylinder head was badly screwed as was the piston head. I also had to change the piston head rubber so that the assembly was watertight.

After that a little better but still no regularity.

The barrel and the Hopup rubber are not exactly AEG elements and are originally faulty.

I did a series of tests to try to fix the problems of regularity and lack of power.
here are the results:
- Original Hopup rubber + original barrel + original spring: standard deviation of about 27fps, max deviation 101 Fps at 0.20g BB's, average power 1.03J
- AEG Hopup rubber + original barrel + original spring: standard deviation of about 2fps max deviation 9 Fps at 0.20gBB's, power 1.20J
- AEG Hopup rubber + original barrel + Guarder SP130 spring: standard deviation of about 3 Fps max deviation 13 Fps at 0.20g BB's, power 1.41J
- AEG Hopup rubber + 550mm AEG barrel + original spring: standard deviation of about 1 Fps max deviation 4 Fps at 0.20g BB's, power 1.61J
- AEG Hopup rubber + 550mm AEG barrel + Guarder SP130: standard deviation of about 2 Fps max deviation 9 Fps at 0.20g BB's, power 1.84J

We can clearly see that the replica was designed to receive a hopup rubber and an AEG barrel but this is not what is originally mounted on it, too bad.

To conclude, the replica is not playable without modification but it is a good basis for an upgrade.

très cool en look, bon poids et m'as l'air résistant a tester sur le terrain. première chose a changer est le joint hopup.
la réplique est démontable facilement
chargeur en metal a l'extérieur et plastique pour l'interieur mais m'as l'air résistant

I wouldn’t say is the best cause it is not. But it is not bad. Hard to get it on the svd you have to work a bit on it with tools or just slam it with a hammer till it fits.
But the reticle and other things are pretty good and having 2 batteries with it is very nice !
I recommend it

Belle finition, très claire , peu nécessité quelques ajustements en fonction de la réplique associée . Sinon rien à critiquer sur le produit en lui même.
https://www.facebook.com/100064083756880/posts/pfbid0d9L99RQrx2E1KyhusheoszvtvfUwsdZ9gd1nwdgKEcAveZ8zic5dF2hch1pGBYJzl/?
Instalée sur dragunov SVD AEG A&K ça rends vraiment bien

Superbe réplique avec une très belle finition et avec un poids très réaliste, pièce mobile massive et lourde, la boiserie est très bien finie et sa teinte peut bien sûr être vieillie pour un réalisme de combat, avec son optique et l’ajout de quelques marquages en cyrillique et elle est vraiment au top. BRAVOO !

Bonne repro pour le visuel externe la lentille est claire confortable.
Je suis juste déçu du système de fixation qui déjà ne passe pas sur le svd cyma j'ai du sortir le dremel, et qui est assez casse tête à régler pour le serrage sur le rail.

Clear reticle, works great with my we ace svd gbbr but a little too tight fitting.

Pros:
-clear reticle
-eye cup sits well and not too loose
-looks great

Cons:
-mount is VERY tight and required a slight filing down to actually get it to be able to be tightened properly
illuminated reticle doesn’t really work well

Pros: Crisp view, illumination works flawlessly, scope is really stable on the cm057 svd, offset is bearable, construction is sturdy.

Cons: elevation and windage turret does not function at all, probably the leaf spring inside is stuck or the gears are off. For airsoft its managable however for 120+ eur you would expect it to function.

The mounting lever is very poorly welded on and snapped off while trying to mount it to the replica.

Also it does not fit on a Cyma Vintorez CM.099 replica. The ilumination bulb housing is too low and it hits the dust cover of the replica. But you can unscrew the ilumination bulb housing and get it to fit that way but you will loose the ilumination. Overall, expensive and poorly built.

The zero wont be useful but you can still effectively use this optic beyond 30m.
To fit on my cyma SVD was a nightmare, a lot of banging with a mallet. Feels solid though.
Only the scope hood could be a little tighter because it rattles and goes out of position easily.

Today l have tested and used my new Svd sniper from Snow wolf. I bought it because I like the shape and the wood parts, simple mechanics to play with. From the box, it shoots 115m/s with 0.25g bbs. I have tried to adjust the hopup but is not the good the rubber...as expected. Was good that they provide a hex key to adjust the hopup since the system needs one. I have changed the spring with a stronger one, was easy by removing 2 screws. The spring guide was dry so l have added some grease. Silicone grease was present inside the cylinder...good and needed. Overall I am satisfied but need tunning to make it better.

Awesome replica.
For the value of the snow wolf svd replica i expected to get a plastic body with crappy wood.
But when i got it i was pleasantly suprised by it being full metal with average wood. The weight was perfect as it wasnt to heavy but not light in a way that it felt you werent holding anything.

Also the easyness of upgrading the internals is great. For example The spring can be exchanged within 3 steps that dont require tools.

Only downside i encountered is that the pin that holds the trigger mechanism in place isnt securelyin the body. It doesnt click in place. Holding the replica sideways lets it easily slide out and by that lets the triggermechanism fall out of it. I now use a peice of tape to hold the pin in place. A solution for this i still need to find.

Perfect spring rifle...very nice material used (wood and metal), its strong enough and accurate...works all good from the box and not need to adjust anything...product feels very premium in hands for perfect price! Will order another product in future for sure!

Aint much to say. It works. It fits well on both E&L and Cyma AK platforms, you just need to adjust the screw for the locking mechanism for the particular optics mount as the exact dimensions differ between manufacturers. Easily done.

It came with two batteries.

The scope is mounted off center so you need to either zero it straight ahead and remember you need to aim slightly to the left of your target, or zero it for a set distance and estimate wether the bb will fly left, right or center depending on how far from your distance the target is.

Replica di buona qualità in considerazione del costo.
Ben realizzate le parti in legno che riducono il peso del fucile rispetto ad altri modelli full-metal.
Il caricatore in metallo si inserisce facilmente, contrariamente ad altri modelli del Dragunov.
La tacca di inserimento della slitta porta ottica non sembra compatibile con le slitte Cyma.
Il caricamento della molla di sparo richiede uno sforzo superiore a quanto richiesto da altri modelli a molla. Questo comporta una riduzione della cadenza di tiro.
Aggiustata la regolazione dell'Hop up in funzione della grammatura dei bbs impiegati, il fucile risulta preciso. Da notare che data la lunghezza dell'arma ed il peso è opportuno impiegare un bipiede o una shooting bag.

This model of pso-1 is perfect for svd replicas, easy to install and use, the reticle is easy to see and the eye relief is perfect, the reticle iluminator is on point, the only downside is the windage dial, on my cyma svd the windage is set at maximum to the right and it still not in line with the bb trajectory.

Awesome scope! Has illumination which can be turned on by a small switch which looks very retro. Reticule looks fine and keeps focus.

The box also looks very nice and is packed securely. Can also be used for storage if needed.

The eyecup which comes with the product does not fit easily. The Rubber Optoc Cover Mod2 from this website fits alot better.

BE WARNED, this does NOT fit your AK without modification. It will also scratch the dust cover of AK's because its made for SVDs. Heating up the brass/gold looking pin and prying it out makes sure it fits on your AK. The clamp also has to be adjusted before it fits, this is shown in the manual.

All by all, a good product to make your SVD or AK platform look more retro and have a cool period correct optic.