[Set] SVD Sniper Airsoft Replica Spring (Real Wood) [Snow Wolf] + 4x24 PSO-1 Type Scope for SVD/SVU [S&T]

Clear reticle, works great with my we ace svd gbbr but a little too tight fitting.

Pros:
-clear reticle
-eye cup sits well and not too loose
-looks great

Cons:
-mount is VERY tight and required a slight filing down to actually get it to be able to be tightened properly
illuminated reticle doesn’t really work well

Pros: Crisp view, illumination works flawlessly, scope is really stable on the cm057 svd, offset is bearable, construction is sturdy.

Cons: elevation and windage turret does not function at all, probably the leaf spring inside is stuck or the gears are off. For airsoft its managable however for 120+ eur you would expect it to function.

The mounting lever is very poorly welded on and snapped off while trying to mount it to the replica.

Also it does not fit on a Cyma Vintorez CM.099 replica. The ilumination bulb housing is too low and it hits the dust cover of the replica. But you can unscrew the ilumination bulb housing and get it to fit that way but you will loose the ilumination. Overall, expensive and poorly built.

The zero wont be useful but you can still effectively use this optic beyond 30m.
To fit on my cyma SVD was a nightmare, a lot of banging with a mallet. Feels solid though.
Only the scope hood could be a little tighter because it rattles and goes out of position easily.

Today l have tested and used my new Svd sniper from Snow wolf. I bought it because I like the shape and the wood parts, simple mechanics to play with. From the box, it shoots 115m/s with 0.25g bbs. I have tried to adjust the hopup but is not the good the rubber...as expected. Was good that they provide a hex key to adjust the hopup since the system needs one. I have changed the spring with a stronger one, was easy by removing 2 screws. The spring guide was dry so l have added some grease. Silicone grease was present inside the cylinder...good and needed. Overall I am satisfied but need tunning to make it better.

Awesome replica.
For the value of the snow wolf svd replica i expected to get a plastic body with crappy wood.
But when i got it i was pleasantly suprised by it being full metal with average wood. The weight was perfect as it wasnt to heavy but not light in a way that it felt you werent holding anything.

Also the easyness of upgrading the internals is great. For example The spring can be exchanged within 3 steps that dont require tools.

Only downside i encountered is that the pin that holds the trigger mechanism in place isnt securelyin the body. It doesnt click in place. Holding the replica sideways lets it easily slide out and by that lets the triggermechanism fall out of it. I now use a peice of tape to hold the pin in place. A solution for this i still need to find.

Perfect spring rifle...very nice material used (wood and metal), its strong enough and accurate...works all good from the box and not need to adjust anything...product feels very premium in hands for perfect price! Will order another product in future for sure!

Aint much to say. It works. It fits well on both E&L and Cyma AK platforms, you just need to adjust the screw for the locking mechanism for the particular optics mount as the exact dimensions differ between manufacturers. Easily done.

It came with two batteries.

The scope is mounted off center so you need to either zero it straight ahead and remember you need to aim slightly to the left of your target, or zero it for a set distance and estimate wether the bb will fly left, right or center depending on how far from your distance the target is.

Replica di buona qualità in considerazione del costo.
Ben realizzate le parti in legno che riducono il peso del fucile rispetto ad altri modelli full-metal.
Il caricatore in metallo si inserisce facilmente, contrariamente ad altri modelli del Dragunov.
La tacca di inserimento della slitta porta ottica non sembra compatibile con le slitte Cyma.
Il caricamento della molla di sparo richiede uno sforzo superiore a quanto richiesto da altri modelli a molla. Questo comporta una riduzione della cadenza di tiro.
Aggiustata la regolazione dell'Hop up in funzione della grammatura dei bbs impiegati, il fucile risulta preciso. Da notare che data la lunghezza dell'arma ed il peso è opportuno impiegare un bipiede o una shooting bag.

This model of pso-1 is perfect for svd replicas, easy to install and use, the reticle is easy to see and the eye relief is perfect, the reticle iluminator is on point, the only downside is the windage dial, on my cyma svd the windage is set at maximum to the right and it still not in line with the bb trajectory.

Awesome scope! Has illumination which can be turned on by a small switch which looks very retro. Reticule looks fine and keeps focus.

The box also looks very nice and is packed securely. Can also be used for storage if needed.

The eyecup which comes with the product does not fit easily. The Rubber Optoc Cover Mod2 from this website fits alot better.

BE WARNED, this does NOT fit your AK without modification. It will also scratch the dust cover of AK's because its made for SVDs. Heating up the brass/gold looking pin and prying it out makes sure it fits on your AK. The clamp also has to be adjusted before it fits, this is shown in the manual.

All by all, a good product to make your SVD or AK platform look more retro and have a cool period correct optic.