+48 123626134 [email protected]
Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Pour voir les spécifications techniques du produit inclus dans l'ensemble, cliquez sur le nom

    EAN 5901698404345
    Poids 3000 g
    Modele de réplique Répliques Airsoft MP5
    Couleur noire
    Matière aluminium, nylon
    Modele chargeur hi-cap
    Mode de tir auto, semi
    Matiere chargeur acier
    Batterie inclue OUI
    Version batterie cube
    Genre batterie NiMH
    Type conneteur batterie small Tamiya
    Type cellule batterie mini
    Version gearbox v.2
    Type roulement acier lisse
    Diametre roulement 7 mm
    Periode garantie 12 mois
    Ammo .23g, .25g
    Numero de serie OUI
    Longueur 740 mm
    Capacité chargeur 200 BBs
    Voltage batterie V 8,4
    Capacité batterie mAh 1200
    Longeur canon interne 220 mm
    Energie sortie projectile 1,41 J
    Vitesse initiale 390 FPS avec billes de 0.20g
    Diamètre canon interne 6,03 mm
    EAN 5901698494469
    Poids 75 g
    Couleur noire
    Matière aluminium
    Longueur 160 mm
    EAN 5901698494391
    Poids 85 g
    Couleur noire
    Matière aluminium
  • Opinions

    • - 11.09.2025 A écrit:
      Bon produit, s'adapte parfaitement à mon MP5 de chez G&G. Permet de rajouter un point rouge et de changer l'aspect de la réplique. Look plus sympa et qui permet de de le moderniser un peu plus.
      Satisfait de mon achat
      Avis d'opinion: 0
    • - 11.09.2025 A écrit:
      Bon produit, de qualité. Acheté pour remplacer le garde main d'un MP5 g&g. Quelques ajustements à faire et pas beaucoup de place pour la batterie, mais ça donne un look sympa et plus moderne.
      Dans l'ensemble je suis satisfait
      Avis d'opinion: 0
    • - 06.09.2024 A écrit:
      Premier achat, première arme. Je l’a trouve qualitative, elle fait un très joli bruit.
      Le full métal est excellent mais un peu lourd évidemment.
      Le sélecteur de mode de tir est un peu dur et peux être peu précis. J’ai du mal à trouver le mode tir coup par coup spontanément Mais il se fera sûrement avec le temps, c’est un détail. Je recommande fortement
      Avis d'opinion: 0
    • - 17.11.2023 A écrit:
      Garde main acheté pour une mp5 Cyma,
      Il est très très bien fini pour le prix, ça a l’air relativement solide.
      La vis est fournie avec. En revanche le packaging est très léger, arrivé limite ouvert
      Un bout de carton et un morceau de papier bulles, mais heureusement arrivé en excellent état !
      Avis d'opinion: 0
    • - 01.08.2023 A écrit:
      Super rail !! Très belle esthétique !! Idéal pour un MP5 SD !! Il permet de pouvoir mettre une lampe ou un laser grâce au fixations M-LOK sur l'avant du rail. Se fixe parfaitement sur mon MP5 Bolt !! Merci Taiwangun pour ce super article !!
      Avis d'opinion: 0
    • - 27.01.2023 A écrit:
      Bien pour une cmo41j look sympa mais faites attention à la taille de vos batteries qui peuvent ne pas passer dans ce garde main assez étroit !
      Avis d'opinion: 0
    • - 30.12.2022 A écrit:
      une merveille, une très bonne solution pour accessoirisé une MP5 SD ! les port M-lock permette l'ajout de rail facilement, il donne un look plus moderne a la réplique !

      Un achat déjà repris pars un ami !

      Foncé sans réfléchir
      Avis d'opinion: 0
    • - 16.08.2022 A écrit:
      Un vrai plaisir à jouer, c’est une réplique en full métal, donc d’un côté elle est lourde ce qui n’est pas forcément une qualité pour une réplique de ce type, mais elle est bien finie et solide, c’est un plaisir de jouer avec une réplique qui à l’air qualitative dans ces matériaux et sa finition surtout pour ce prix.
      Mais je relève 3 points négatifs :
      - le compartiment à batterie à l’avant est une horreur, une fois qu’elle est dedans c’est ok mais c’est un combat pour la faire rentrer
      - les attaches sangles sont pas adaptées aux gauchers
      - le réglage hopup n’est pas accessible facilement (en tout cas pas comme celui de mon M4 (Cm619)
      Avis d'opinion: 1
    • - 11.05.2022 A écrit:
      Pièce très bien finit par contre ne s’adapte pas sur le GSG 522 ICS.
      La pièce est trop courte de 15mm mais ça peut s’arranger en bricolant une patte de fixation.
      Sinon reçu pile dans les délais indiqués le colis était très bien emballé.
      Les rails M-lock sont bien ajustés j’ai pu monter une poignée et une lampe il n’y a aucun jeu.
      Donne un look beaucoup plus agressif à la réplique permet le montage d’accessoires (ce qui n’était pas possible avant) et un peu plus de poids à l’avant ce que je trouve beaucoup plus agréable.
      Attention néanmoins une fois ce garde main monté vous ne pourrez plus y loger une batterie ou alors une très très fine.
      Avis d'opinion: 0
    • - 26.04.2022 A écrit:
      Super aussi bien en CQB qu’en extérieur ,grosse réactivité en coup par coup avec une Lipo ,grande portée environ 60 mètre en 0.25,réplique full métal sans jeux entre les pièces
      Avis d'opinion: 1
    • - 12.01.2022 A écrit:
      Superbe garde-main métal! Belle finition noire, le système M-LOCK est vraiment appréciable mais attention, non compatible avec les modèles SD, même CYMA.
      C'est dommage car le rendu est beaucoup plus moderne que les versions d'origine!
      Avis d'opinion: 1
    • - 02.07.2026 A écrit:
      Deze rail is zeer goed, mits wat aanpassingen past deze perfect op mijn g&g mp5, heeft ook een mooie afwerking, en is ook zeer stevig, ik zou het iedereen aanraden om deze te kopen als je u mp5 een ander uiterlijk wil geven
      Avis d'opinion: 0
    • - 01.04.2025 A écrit:
      I was looking to mount a flashlight to the top of my CYMA MP5SD, and this fulfilled that purpose perfectly. It did bulk up the profile of my MP5 a little more, but that's completely overshadowed by the utility this top rail provides, which brings a touch of modernity to a classic gun.
      Avis d'opinion: 0
    • - 27.01.2025 A écrit:
      I bought this product from Taiwangun for my WE MP5 (APACHE) after reading on a reddit forum that it might fit.

      And indeed after a little modification it can be made to fit!
      The build quality is good, nice matte finish on the aluminium.
      Would recommend!

      Jan
      Avis d'opinion: 0
    • - 23.10.2024 A écrit:
      Love it, exactly the one i wanted super sturdy and super reliable. Tipical quality from cyma standard, not to heavy but also not light enought to appear like a toy. Very good attention to the detail of the gun
      Avis d'opinion: 0
    • - 19.08.2024 A écrit:
      Super high quality externals that feel rock sold with no wobble ,easy change spring system that has bearings on the spring guide
      Front wired with plenty of room in the handguard for large batteries.
      Gears and piston feels sold with a great air seal with no air leaks.
      if you looking for a MP5 that won't break the bank this replica is for you. You will not regret your purchase.
      Avis d'opinion: 0
    • - 09.08.2024 A écrit:
      Fantastic rifle for the money! The mostly-metal construction is very solid, and the places where polymer is used doesn't feel flimsy at all. I was extremely happy with the internals as well, and with an upgraded hop rubber and nub (Maple Leaf Macaron), I'm consistently accurate on a man-sized target at 175 feet.

      Pros:
      -Full metal rack on piston
      -Silent-style aluminum piston head and cylinder head.
      -Quick-change spring with metal spring guide (only need to remove a small piece at the back of the rifle to access - no need to remove gear box)

      Cons:
      Not a terribly strong motor - easy to upgrade, though
      Avis d'opinion: 0
    • - 31.10.2023 A écrit:
      A bit heavy and massive weapon whit good balance.
      Slideing Hop-up makes it easy to find the right setting.
      The locking tab which fixes the stock is weak.
      The default hi-cap magazine feeder is not the best.
      If you wanna use red dot or scope you have to buy top rail to.
      Avis d'opinion: 4
    • - 28.10.2023 A écrit:
      Very good value for the money, feels really sturdy and the upper receiver and picatinnyrails are made of metal the looks and feel of this replica is amazing and the trigger response when using a 11.1 v lipo battery is above my expectation. This is my favorite cqb replica at this moment.
      Avis d'opinion: 2
    • - 22.02.2023 A écrit:
      The handguard construction is really solid, the paint is nicentoo and it gives a really nice modern look to mp5 replicas while allowing to mount any type of flashlights, lasers, grips, or any accessory you would need for an airsoft game
      Avis d'opinion: 0
    • - 12.01.2023 A écrit:
      This extened rail fit perfectly on my CYMA MP5 SD6. No issues with fitting or rail size.

      The MLOK section holds my flashlight perfectly and as the rail is slightly raised, creates a nice space for the pressure switch.

      If I ever need to purchase another MP5, this will be in my basket as well!

      Avis d'opinion: 2
    • - 10.11.2022 A écrit:
      So far the best item i could get quick spring release is what it make it special. Fire rate is actually close to reality. Accurate gun. Some weight on it is like being full metal but the material is so solid. You can remove the flashhider and put silencer instead also rails are helpful installing flashlight or laser or even peq. Also you can install rail on the top of the gun for red dot or Scope. VALUE FOR MONEY. And i love the UMP stock. The store is awsome the item arrived one day sooner than expected. With Warranty and everything in order. Thank you very much. The only thing that bothered me was that the stock battery 8.4v is barely fit in the position.
      Avis d'opinion: 4
    • - 09.11.2022 A écrit:
      A very nice upgrade for a classic design. Something about the extra length running to the front sight post just make the overall look of an mp5 seem complete. Install is easy enough. The only tricky part is the grub screw to the front sight post. But once its installed and everything is tighten down the whole mount is rock solid. Its also extremely light weight as well. I was shocked once I held it in hand only weighting a few onces all together.
      Avis d'opinion: 1
    • - 28.10.2022 A écrit:
      Somebody said in the review it’s compatible with the WE APACHE MP5, so I bought it. He is a liar. It’s not fit. The screws are low quality, the paint is looks great. The whole thing is very lightweight.
      Avis d'opinion: -3
    • - 19.10.2022 A écrit:
      Best mp5 edition, cm.041 blue edition, great rate of fire, looks like real arms, bild with very duriablle material, came with one hi cap magazin. Good place to put batery, 1.8 qube lipo without problem.
      Avis d'opinion: 0
    • - 18.10.2022 A écrit:
      It is actually surprisingly light. Fits the mlock mp5 foregrip perfectly.
      I put it on a cyma cm041j and it fits well. When I put force on the grip I can almost feel a little play, but it's not rattling or clicking or feeling free in any way.
      Avis d'opinion: 1
    • - 11.10.2022 A écrit:
      The part itself is good quality and feels/looks nice. However be aware that some models of the mp5 have a shorter receiver (im not talking about the mp5k). My classic army has this shorter receiver and the rail does not fit. There is an adapter for this that comes included in the plastic RIS handguard from cyma. This looks like it fills the gap between the rail and reciever.

      For reference, the short mp5 reciever stops where the front radius of the magwell ends. The longer reciever extends a good 3-4cm beyond this.
      Avis d'opinion: 0
    • - 21.07.2022 A écrit:
      Essential for any mp5 purchase IMO, lets you mount modern optics to these Cold War era beauties! Not the easiest to install, but solid as a rock once it's done. Only compatible with full size MP5s, you'll need a different one for the diminutive MP5k!
      Avis d'opinion: 2
    • - 20.07.2022 A écrit:
      Wonderful gun. A little clunky for something "smaller" but I think with the right stock it'll be better for me. Strangely mine came with the screw that's in the grip, that controls the height of the motor, ALL the way up and it wouldn't fire initially. Luckily I took it to a local store and they mentioned it might be that and I took it home, and surely enough it was.
      Avis d'opinion: 0
    • - 06.07.2022 A écrit:
      This MP5 is a beast! The feel of it is so real, I can't even imagine I got this for under 200€.
      The fire rate and power is very good in stock, and I bet it can even be better with some minor improvements, not that you need it.. This gun is a beast on the field, it gives you confidence to go CQB or mid-range kills with it's adjustable stock.

      I'm speechless for this deal.

      AND IT BRINGS A FOREGRIP AND RAIL SYSTEM ON both sides of it!!!

      Only con, but it's not related only to this specific model, is the battery placement. It's a little bit tricky in the beginning because there isn't much space, but it's manageable. However, I'm thinking on getting a new smaller battery to be easier to install.

      Please buy this if you really like the MP5.
      Avis d'opinion: 1
    • - 08.04.2022 A écrit:
      Raíl M-lock para MP5
      Perfecto para colocar en cualquier MP5 yo se lo he puesto al de Marui y ha quedado muy chulo y diferente. Entiendo que Valdrá para más marcas. Recomendado 100% tiene tornillos para que no se pliegue en la parte delantera donde va el punto de mira, no quitar
      Avis d'opinion: 2
    • - 19.01.2022 A écrit:
      This mlok rail is perfect for my cyma mp5, and it does fit my WE gbb mp5 aswell. The mlok is great, none of my mlok attachment wobble or anything. Easy to remove and attach. I cant vouch for the batteryspace cause I have my battery in the stock, but you could definitelly fit a 1000mah 7,4 with a little squeeze.
      Avis d'opinion: 1
    • - 08.11.2021 A écrit:
      Good manufacture and painting , but too short for fitting in a ICS MP5a4 , no other to tell . Strangely , MP5 of the various producer , usually are perfect Marui clones in external parts.........
      Avis d'opinion: 4
    • - 16.09.2021 A écrit:
      I have this replica for a month now, it all works good for now, nice packaging, really nice feel to the gun, nice weight (balanced)
      Avantages:
      As far advantages go I think first off all is the price, you do get alot for 140euros. One of the advantages that i like the most is the metal bolt, so you can do the HK SLAP, dont know for how long but the main thing is you can do it !
      A lot of other mags can fit hear easly.
      Gearboxes usually from Cyma are good, I think you only need a new hopup rubber and maybe a better barrel, and you will good to go.
      Inconvénients:
      For some people maybe its "to heavy for submachine gun" but I like its weight, very balanced.
      Dont know if its disadvantage or not but you cant use 11.1v Lipo for this one, I mean you can but not for to long, you will destroy your gearbox, maybe you can use less powerfull 11.1lipo like 15-30c and don't charge it fully, if your replica shoots 2-3 bbs at once in single mode, it means that batter is too powerful
      Avis d'opinion: 11
    Ajouter un avis


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: · EAN: - · [Ensemble] CM.041 BLUE Edition [CYMA] + Garde main MLOCK pour MP5 [CYMA] + Montage extension rail [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport