[Zestaw] CM.041 BLUE Edition [CYMA] + Łoże MLOCK do MP5 [CYMA] + Przedłużona górna szyna montażowa do MP5 [CYMA]

Szyna jak najbardziej zgodna z opisem, jej długość spokojnie pomieści większe kolimatory, lepsza alternatywa dla szyny 9cm, łatwy montaż. Po zamontowaniu mamy pewność że, jest ułożona równo z lufą. Polecam ten produkt, pasuje idealnie do CM.041J High Speed.

Niezły produkt, fajna możliwość montażu dodatkowych szyn lub bezpośrednio na system bliżej okladzin. Wszystko w jak najlepszym porządku, niezła jakość. Jestem bardzo zadowolony z produktu Tajwangun... Najsolidniej i najtaniej, strzał w punkt +.

Ciężko oczekiwać cudów za te pieniądze. Moim zdaniem w relacji koszt-jakość to świetny wybór.
Plusy:
- cena
- wykonanie metalowego body, żadnych nadlewek czy innych niedoskonałości,
- fps zgodny z danymi producenta, bez oszukiwania
- całkiem celna jak na stock
- waga jeśli ktoś lubi czuć solidny kawał żelastwa w ręku
- mp5 slap do zabawy, dźwignia po zrzuceniu nie udeża w body, jest z 2 mm odstępu więc jest szansa że przetrwa dłużej taką zabawę
- przyzwoity rps
- duży i wygodny zwalniacz magazynka
- składana kolba po dokręceniu solidnie trzyma i nie kolebie
- plastik z którego wykonano dolną część korpusu solidny i przyjemnie chropowaty
- ładna, ale to kwestia gustu
Minusy:
-chwyt przedni z plastiku niezbyt wysokiej jakości do tego jego spasowanie z repliką jest słabe, bez podklejania taśmą kolebie się, w ogóle sprawia wrażenie jakby wzięto go od jakiegoś tańszego producenta
- waga jeśli ktoś nie lubi dźwigać żelastwa
- miejsca na baterie to za dużo tu nie ma
- farby którymi namalowano rodzaje ognia, ścierają się po miesiącu, a farba którą pomalowano nakrętkę na gwint 14mm zaczęła się ścierać po kilku odkręceniach
- brak jakiegoś najprymitywniejszego mosfetu (wada na siłę raczej, patrz cena)
Polecam po zakupie dokręcić śruby. Szczególnie imbus od kolby. Niedokręcona kolba jest zbyt luźna i spada z zęba na który się ją zapina przy składaniu.
Ogólnie polecam replikę, przyjemny kawałek zabawki :)

Que dire a part que c'est parfait , il y as assez de place pour couplet un holo et protection viseur ou autres viseur . On peux y mettre n importe quel viseur sa bouge pas. Aucun jeux et sa fait stylé sur le mp5 .
Je recommande a 100%

Bardzo dobrej jakości froncik. Metal dobrej jakości, farba nie schodzi, nie łuszczy się. Idealnie wchodzi na swoje miejsce i siedzi tam jak monolit, ani drgnie. Akcesoria typu okładziny, czy chwyty przednie, hand stopy trzymają się równo mocno frontu, co sam front repliki. Dodatkowy atut to fakt iż w przeciwieństwie do innych frontów do mp5, ten nie jest na pin, a jest wkręcany, co wpływa pozytywnie na jego trzymanie się swojego miejsca i brak jakiegokolwiek ruchu, ponadto nadaje futurystycznego charakteru replice, czego chcieć więcej. Za te pieniądze jak najbardziej polecam, 5/5

Rewelacja! Używam tego łoża w oryginale HK i znakomicie spełnia swoją funkcję wraz z latarką Olight. Byłem sceptyczny jednak tym razem nie potrzebnie. Solidne aluminium, precyzyjne wykonanie. Co najważniejsze, jakieś półtora tysiąca złotych zaoszczędzone. Gorąco polecam.

Produkt jest starannie wykonany jak za tą cenę.
Łoże sprawuje się w jak należy, lekkie i wygodne. Nie miałem problemów z mocowaniem chwytu tego samego producenta. Jedynie niestety na minus mały zakres regulacji dopasowania łoża do szkieletu repliki (te mniejsze śrubki na inbus).

Stan repliki bardzo dobry. Świetnie spasowana, nic nie "trzeszczy". Strzela gladko i płynnie. Jedyne do czego można się przeczepic to jej waga. Chociaż dla mnie osobiście nie jest to wada, to nie każdemu musi się to podobać. Polecam jednak, w tej cenie jakość jest rewelacyjna.

Deze rail is zeer goed, mits wat aanpassingen past deze perfect op mijn g&g mp5, heeft ook een mooie afwerking, en is ook zeer stevig, ik zou het iedereen aanraden om deze te kopen als je u mp5 een ander uiterlijk wil geven

I was looking to mount a flashlight to the top of my CYMA MP5SD, and this fulfilled that purpose perfectly. It did bulk up the profile of my MP5 a little more, but that's completely overshadowed by the utility this top rail provides, which brings a touch of modernity to a classic gun.

I bought this product from Taiwangun for my WE MP5 (APACHE) after reading on a reddit forum that it might fit.

And indeed after a little modification it can be made to fit!
The build quality is good, nice matte finish on the aluminium.
Would recommend!

Jan

Love it, exactly the one i wanted super sturdy and super reliable. Tipical quality from cyma standard, not to heavy but also not light enought to appear like a toy. Very good attention to the detail of the gun

Super high quality externals that feel rock sold with no wobble ,easy change spring system that has bearings on the spring guide
Front wired with plenty of room in the handguard for large batteries.
Gears and piston feels sold with a great air seal with no air leaks.
if you looking for a MP5 that won't break the bank this replica is for you. You will not regret your purchase.

Fantastic rifle for the money! The mostly-metal construction is very solid, and the places where polymer is used doesn't feel flimsy at all. I was extremely happy with the internals as well, and with an upgraded hop rubber and nub (Maple Leaf Macaron), I'm consistently accurate on a man-sized target at 175 feet.

Pros:
-Full metal rack on piston
-Silent-style aluminum piston head and cylinder head.
-Quick-change spring with metal spring guide (only need to remove a small piece at the back of the rifle to access - no need to remove gear box)

Cons:
Not a terribly strong motor - easy to upgrade, though

A bit heavy and massive weapon whit good balance.
Slideing Hop-up makes it easy to find the right setting.
The locking tab which fixes the stock is weak.
The default hi-cap magazine feeder is not the best.
If you wanna use red dot or scope you have to buy top rail to.

Very good value for the money, feels really sturdy and the upper receiver and picatinnyrails are made of metal the looks and feel of this replica is amazing and the trigger response when using a 11.1 v lipo battery is above my expectation. This is my favorite cqb replica at this moment.

The handguard construction is really solid, the paint is nicentoo and it gives a really nice modern look to mp5 replicas while allowing to mount any type of flashlights, lasers, grips, or any accessory you would need for an airsoft game

This extened rail fit perfectly on my CYMA MP5 SD6. No issues with fitting or rail size.

The MLOK section holds my flashlight perfectly and as the rail is slightly raised, creates a nice space for the pressure switch.

If I ever need to purchase another MP5, this will be in my basket as well!

So far the best item i could get quick spring release is what it make it special. Fire rate is actually close to reality. Accurate gun. Some weight on it is like being full metal but the material is so solid. You can remove the flashhider and put silencer instead also rails are helpful installing flashlight or laser or even peq. Also you can install rail on the top of the gun for red dot or Scope. VALUE FOR MONEY. And i love the UMP stock. The store is awsome the item arrived one day sooner than expected. With Warranty and everything in order. Thank you very much. The only thing that bothered me was that the stock battery 8.4v is barely fit in the position.

A very nice upgrade for a classic design. Something about the extra length running to the front sight post just make the overall look of an mp5 seem complete. Install is easy enough. The only tricky part is the grub screw to the front sight post. But once its installed and everything is tighten down the whole mount is rock solid. Its also extremely light weight as well. I was shocked once I held it in hand only weighting a few onces all together.

Somebody said in the review it’s compatible with the WE APACHE MP5, so I bought it. He is a liar. It’s not fit. The screws are low quality, the paint is looks great. The whole thing is very lightweight.

Best mp5 edition, cm.041 blue edition, great rate of fire, looks like real arms, bild with very duriablle material, came with one hi cap magazin. Good place to put batery, 1.8 qube lipo without problem.

It is actually surprisingly light. Fits the mlock mp5 foregrip perfectly.
I put it on a cyma cm041j and it fits well. When I put force on the grip I can almost feel a little play, but it's not rattling or clicking or feeling free in any way.

The part itself is good quality and feels/looks nice. However be aware that some models of the mp5 have a shorter receiver (im not talking about the mp5k). My classic army has this shorter receiver and the rail does not fit. There is an adapter for this that comes included in the plastic RIS handguard from cyma. This looks like it fills the gap between the rail and reciever.

For reference, the short mp5 reciever stops where the front radius of the magwell ends. The longer reciever extends a good 3-4cm beyond this.

Essential for any mp5 purchase IMO, lets you mount modern optics to these Cold War era beauties! Not the easiest to install, but solid as a rock once it's done. Only compatible with full size MP5s, you'll need a different one for the diminutive MP5k!

Wonderful gun. A little clunky for something "smaller" but I think with the right stock it'll be better for me. Strangely mine came with the screw that's in the grip, that controls the height of the motor, ALL the way up and it wouldn't fire initially. Luckily I took it to a local store and they mentioned it might be that and I took it home, and surely enough it was.

This MP5 is a beast! The feel of it is so real, I can't even imagine I got this for under 200€.
The fire rate and power is very good in stock, and I bet it can even be better with some minor improvements, not that you need it.. This gun is a beast on the field, it gives you confidence to go CQB or mid-range kills with it's adjustable stock.

I'm speechless for this deal.

AND IT BRINGS A FOREGRIP AND RAIL SYSTEM ON both sides of it!!!

Only con, but it's not related only to this specific model, is the battery placement. It's a little bit tricky in the beginning because there isn't much space, but it's manageable. However, I'm thinking on getting a new smaller battery to be easier to install.

Please buy this if you really like the MP5.

Raíl M-lock para MP5
Perfecto para colocar en cualquier MP5 yo se lo he puesto al de Marui y ha quedado muy chulo y diferente. Entiendo que Valdrá para más marcas. Recomendado 100% tiene tornillos para que no se pliegue en la parte delantera donde va el punto de mira, no quitar

This mlok rail is perfect for my cyma mp5, and it does fit my WE gbb mp5 aswell. The mlok is great, none of my mlok attachment wobble or anything. Easy to remove and attach. I cant vouch for the batteryspace cause I have my battery in the stock, but you could definitelly fit a 1000mah 7,4 with a little squeeze.

Good manufacture and painting , but too short for fitting in a ICS MP5a4 , no other to tell . Strangely , MP5 of the various producer , usually are perfect Marui clones in external parts.........

I have this replica for a month now, it all works good for now, nice packaging, really nice feel to the gun, nice weight (balanced)

As far advantages go I think first off all is the price, you do get alot for 140euros. One of the advantages that i like the most is the metal bolt, so you can do the HK SLAP, dont know for how long but the main thing is you can do it !
A lot of other mags can fit hear easly.
Gearboxes usually from Cyma are good, I think you only need a new hopup rubber and maybe a better barrel, and you will good to go.

For some people maybe its "to heavy for submachine gun" but I like its weight, very balanced.
Dont know if its disadvantage or not but you cant use 11.1v Lipo for this one, I mean you can but not for to long, you will destroy your gearbox, maybe you can use less powerfull 11.1lipo like 15-30c and don't charge it fully, if your replica shoots 2-3 bbs at once in single mode, it means that batter is too powerful