+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

Silent sealed cylinder set V2 [POINT]

Promotion
POINT  FB05011 | Disponible
Notre prix*: $18.63

Dernier prix avant la promotion: $26.62

Changer Livraison gratuite à partir de 250 € ou dès 9,50 € pour la livraison par Mondial Relay Tout sur le livraison : France

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: POINT
    Code: FB05011
    EAN 5901698474133
    Poids 50 g

  • Opinions

    • - 05.07.2024 A écrit:
      De mauvaise qualité ring de la tête de cylindre se décolle, revêtement du cylindre rugueux donc détruit le join de la tête de piston et la tête à fuire. D’autre marque dont le même type de produit pour moin cher et de meilleur qualité.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      Thank you for your feedback, it will allow us to improve the products we offer.
      Feel free to contact our service, we will be happy to help you solve any problems related to the purchased goods.
    • - 09.05.2023 A écrit:
      Très bon kit permet une bonne étanchéité sur une upgrade de m4.
      À valider dans le temps mais tout cela respire la solidité.
      Ne pas oublier le kit de graisse silicone adapté afin de maximiser l’étanchéité au montage dans votre réplique.
      La commande comme toujours reçu dans les temps est bien emballé pour sécuriser les produits
      Avis d'opinion: 0
    • - 22.07.2026 A écrit:
      Great, however. The rubber part of the pistonhead came loose but i could just put it back. The cylinder is as others said, a bit bigger than orginal so be careful when putting it in the gearbox. I'm using a DE904G
      Avis d'opinion: 0
    • - 28.02.2025 A écrit:
      I have been using the inner parts from this manufacturer for a long time. The dimensions always match the dimensions of the original inner parts. The quality of the materials from which the inner parts are made is also at a high level. I am engaged in the repair of airsoft replicas and I will say right away that you can take them safely and without fear. This set, together with a correctly selected spring and a well-made shim, gives a good increase in the noise level of the replica. Plus an attractive price. I recommend purchasing R5
      Avis d'opinion: 0
    • - 05.02.2025 A écrit:
      The cylinder was too tight for the piston because it was rubbing against the cylinder and when i was shooting the rubbing sound made the gun louder and it just sounded awful. I would not recommend buying it. And the piston head rubber was always falling off because it was not tight. The cylinder didn't have a smooth inside but a grooved inside.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      In such cases please contact our techs, maybe they could help you make it work like it should. Or fill out the claim form and send the product back to us if you are not happy with its quality.
    • - 10.03.2023 A écrit:
      The cylinder is quite nice, the piston head and nozzle seal nicely and so does the piston head but the rubber part of the head came loose and stuck itself to the cylinder head while firing.

      A similar kit to this one but with a regular (not silent) piston and cylinder heads would be nice.
      Avis d'opinion: 1
    • - 02.01.2023 A écrit:
      The cylinder was slightly too big to fit in my gearbox, so I wasn't able to use that. The piston-head has a rubber front which was completely loose and just fell sideways during the first cycle which means I had to open the gearbox again. On top of that, the back of the cylinder-head also has a rubber ring facing towards the piston, that was also loose and had a lot of rubber threads hanging off of it and had a ragged edge.
      All in all, I would definitely not recommend this set.
      Avis d'opinion: 0
    • - 16.12.2022 A écrit:
      Also another problem i had with these is that the rubber in the back of the cylinder head came out on one of my sets i bought and the rubber on the piston head came out too and got chewed up pretty bad along with the o-ring and the seal on the cylinder head. I fixed with a stiffer o-ring though or get a little bigger one. They dont work well with faster full auto either.
      Avis d'opinion: 0
    • - 16.12.2022 A écrit:
      Good compression set. The only problem i had with them was that the o ring in them was to flexible and loose and it kept getting torn in the cylinder. I thought it could have been the wrong size but they came in a whole set so idk, but i put a stiffer o ring in them and they work fine now. They increase your fps quite a bit too.
      Avis d'opinion: 0
    • - 06.10.2022 A écrit:
      Was not impressed, all of the components did not seal well together and the piston head was scratching the cylinder when testing the system. It does however hold an air seal when you get a slightly thicker o-ring. Overall not bad for its price, just be careful when installing it.
      Avis d'opinion: 2
    Ajouter un avis

  • Demander un produit

    L’administrateur de vos données personnelles est \ KRAKMAN P.Kiepura, K.Michalik Sp. k. ayant son siège à Cracovie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Les données à caractère personnel ne seront traitées que pour établir un contact avec vous et aux fins légalement justifiées du responsable du traitement. La communication de vos données personnelles est volontaire mais également nécessaire pour vous contacter. Vous trouverez des informations détaillées sur le traitement de vos données personnelles dans notre Politique de confidentialité sur les règles de traitement des données personnelles Les champs marqués d'un (*) sont obligatoires
The set includes a double-sealed silent reinforced cylinder head. The cylinder head has a rubber ring that reduces shocks at the place where the cylinder head meets the gearboxs shell.
It was made of aluminum on CNC machine.

Double-sealed nozzle with a length of 21.4 mm was also made on aluminum CNC machines.

Silent aluminum piston head with bearing is equipped with o-ring. They ensure perfect tightness.

Made of stainless steel, polished cylinder type A, made on CNC machine.
The inner diameter of the cylinder is 23,7 mm.
Thanks to the polished cylinder surface, the frictional resistance is significantly reduced.
The perfect fit of the elements of the set provides extraordinary tightness, increasing the performance of the replica.


Consignes de sécurité et d'utilisation

Ce produit répond à toutes les exigences réglementaires. Assemblage professionnel requis. Commandez le service d'assemblage chez Taiwangun ou consultez les ressources ci-dessous. Attention: contient de petites pièces, ne convient pas aux enfants de moins de 14 ans.
SKU: FB05011 · EAN: 5901698474133 · Silent sealed cylinder set V2 [POINT] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport