+48 123626134 [email protected]
Cambiar idioma a inglés Cambiar el idioma al polaco Cambiar idioma a francés Cambiar idioma a español Cambiar el idioma al alemán
RINCÓN DE PRENSA
iniciar sesión | Registro
0 0

Silent sealed cylinder set V2 [POINT]

Promoción
POINT  FB05011 | Disponible
Nuestro precio*: $18.63

Último precio antes de la promoción: $26.62

Cambia Envío gratis desde 299 € o desde 9,50 € para el envío con InPost Todo sobre el envío: España

  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Fabricante: POINT
    código: FB05011
    EAN 5901698474133
    Peso 50 g

  • Opiniones

    • - 22.07.2026 escribió:
      Great, however. The rubber part of the pistonhead came loose but i could just put it back. The cylinder is as others said, a bit bigger than orginal so be careful when putting it in the gearbox. I'm using a DE904G
      Valoración de opinión: 0
    • - 28.02.2025 escribió:
      I have been using the inner parts from this manufacturer for a long time. The dimensions always match the dimensions of the original inner parts. The quality of the materials from which the inner parts are made is also at a high level. I am engaged in the repair of airsoft replicas and I will say right away that you can take them safely and without fear. This set, together with a correctly selected spring and a well-made shim, gives a good increase in the noise level of the replica. Plus an attractive price. I recommend purchasing R5
      Valoración de opinión: 0
    • - 05.02.2025 escribió:
      The cylinder was too tight for the piston because it was rubbing against the cylinder and when i was shooting the rubbing sound made the gun louder and it just sounded awful. I would not recommend buying it. And the piston head rubber was always falling off because it was not tight. The cylinder didn't have a smooth inside but a grooved inside.
      Valoración de opinión: 0
      Odpowiedź sklepu:
      In such cases please contact our techs, maybe they could help you make it work like it should. Or fill out the claim form and send the product back to us if you are not happy with its quality.
    • - 10.03.2023 escribió:
      The cylinder is quite nice, the piston head and nozzle seal nicely and so does the piston head but the rubber part of the head came loose and stuck itself to the cylinder head while firing.

      A similar kit to this one but with a regular (not silent) piston and cylinder heads would be nice.
      Valoración de opinión: 1
    • - 02.01.2023 escribió:
      The cylinder was slightly too big to fit in my gearbox, so I wasn't able to use that. The piston-head has a rubber front which was completely loose and just fell sideways during the first cycle which means I had to open the gearbox again. On top of that, the back of the cylinder-head also has a rubber ring facing towards the piston, that was also loose and had a lot of rubber threads hanging off of it and had a ragged edge.
      All in all, I would definitely not recommend this set.
      Valoración de opinión: 0
    • - 16.12.2022 escribió:
      Also another problem i had with these is that the rubber in the back of the cylinder head came out on one of my sets i bought and the rubber on the piston head came out too and got chewed up pretty bad along with the o-ring and the seal on the cylinder head. I fixed with a stiffer o-ring though or get a little bigger one. They dont work well with faster full auto either.
      Valoración de opinión: 0
    • - 16.12.2022 escribió:
      Good compression set. The only problem i had with them was that the o ring in them was to flexible and loose and it kept getting torn in the cylinder. I thought it could have been the wrong size but they came in a whole set so idk, but i put a stiffer o ring in them and they work fine now. They increase your fps quite a bit too.
      Valoración de opinión: 0
    • - 06.10.2022 escribió:
      Was not impressed, all of the components did not seal well together and the piston head was scratching the cylinder when testing the system. It does however hold an air seal when you get a slightly thicker o-ring. Overall not bad for its price, just be careful when installing it.
      Valoración de opinión: 2
    Añadir una opinión

  • Preguntar por el producto

    El administrador de sus datos personales es \ KRAKMAN P.Kiepura , K.Michalik Sp. k. con su domicilio social en Cracovia, calle. Półłanki 18, 30-740 Cracovia, NIP/NIF : 6793082897, REGON: 122593008. Los datos personales se procesarán únicamente con el fin de contactarlo y con fines legalmente justificados del administrador de datos. Proporcionar sus datos personales es voluntario pero también necesario para contactarlo. Puede encontrar información detallada sobre el procesamiento de sus datos personales en nuestro Política de privacidad sobre los principios del procesamiento de datos personales. Campos marcados con (*) son obligatorios
The set includes a double-sealed silent reinforced cylinder head. The cylinder head has a rubber ring that reduces shocks at the place where the cylinder head meets the gearboxs shell.
It was made of aluminum on CNC machine.

Double-sealed nozzle with a length of 21.4 mm was also made on aluminum CNC machines.

Silent aluminum piston head with bearing is equipped with o-ring. They ensure perfect tightness.

Made of stainless steel, polished cylinder type A, made on CNC machine.
The inner diameter of the cylinder is 23,7 mm.
Thanks to the polished cylinder surface, the frictional resistance is significantly reduced.
The perfect fit of the elements of the set provides extraordinary tightness, increasing the performance of the replica.


Directrices de seguridad y uso

Este producto cumple con todos los requisitos reglamentarios. Requiere montaje profesional. Solicite el servicio de montaje en Taiwangun o consulte los materiales a continuación. Advertencia: contiene piezas pequeñas, no apto para menores de 14 años.
SKU: FB05011 · EAN: 5901698474133 · Silent sealed cylinder set V2 [POINT] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.