WE09 assault rifle replica [WELL PRO]

Très bonne réplique, un poids parfait pour de longue journée en extérieur et un plastique qui ne fait pas cheap. Tire de la 0.3g sans modification sans problème a 45m. Externe et marquage parfait.
Excellent rapport qualité prix !

Avoir une ak12 avec un Rapport qualité/prix parfait, avec une bonne réactivité, finition impeccable et grâce au mosfet utilisation de batterie 11.1v sans aucune modification en sortie de boîte que demander de plus. Très chouette réplique je conseille fortement surtout à ce prix là difficile de trouver mieux.

Rapport qualité/prix difficile batable. On a une réplique que fonction très bien sortie de boîte, le hop up fait assez bien sont travail, la réactivitée est très bonne (manque peut-être d'une détente réglable). Et le look est vraiment très sympa ! Ah j'oubliais le polymère est aussi de très bonne qualité.

La réplique fonctionne parfaitement bien et son poids est très bien pour ma tendinite. Juste un petit bémol pour le joint hopup que j'ai du mettre à 7 pour lever de la 0.25. Sinon je la conseillerais pour celui qui veut une AK12 pas trop lourde.

Très bonne réplique d'AK12/2023. Plus légère que du full métal, du coup très agréable tout au long d'une journée d'airsoft. Je l'ai demandé downgrade à 350fps, elle sort du 345 stable. Elle lève de la 0.28 à 50 mètres sans soucis en sortie de boîte. Je n'est pas ressenti le besoin de remplacer le joint hopup.
Avec la promo à 148€ le rapport qualité prix est juste imbattable.
Le dust cover est en polymère du coup je pensais que les optiques qu'on met dessus (dans mon cas un red dot micro T1) allaient bouger, mais non, c'est bien foutu et ça ne bouge pas. (A voir avec une optique type LPVO qui risque d'être un peut être trop lourd pour du polymère, mais je n'ai pas testé). Bref si vous voulez un AK récent, foncez ! C'est totalement worth it !

Vraiment belle replique pour commencer ! Le top du top , très bonne réactivité , je la recommande pour tout nouveau joueur ,La replique fonctionne bien , est pas lourde , et tres maniable grâce a sa crosse retractable, on peut facilement mettre des accesoire grace à ses rail picatini.

Enorme et magnifique surprise de voir une ak12 avec une bonne réactivité et une légèreté non négligeable pour un prix mais abordable j'ai aimé toute les parties faites avec et je la recommande pour un joueur qui ne veut pas trop dépensé mais ce faire plaisir .


je recommande le changement du joint par un maple leaf 50° et un canon 6.02 a vous de voir ceux que vous trouvé le meilleur

le + : le mosfet réglable à la détente et la possibilité de la joué en 11.1

Excellent rapport qualité prix, la finition polymère est très réussie et propose donc une réplique qui reste solide et légère. L'expérience de tir est aussi très bonne avec une bonne réactivité en sortie de boîte. Un achat idéal pour un primo accédant.

First buy as a new airsoft enthusiast. Everything is working fine :)
The FPS is according to what was expected. The build is strong and it's working fine after a few games.
The hop up seem to be configured correctly out of the box.

Très belle réplique de l AK12 2023, polymère mais très qualitatif avec un poids plus contenu.
Réplique fidèle à l arme.
Réplique fonctionnelle, agréable à utiliser.
Pas de regret à avoir d autant que son prix est attractif.
Belle évolution de Well.
Foncez

Vraiment une chouette réplique, le polymère est vraiment bien fait, au regard on dirait du métal. Pas de jeux dans le polymère, juste une légère torsion du plastique mais rien de méchant mais c'est du solide. La réplique tourne comme une horloge. Bonne reactivité. Le démontage est un vrai bonheur, très rapide et simple pour sortir la GB ou sortir le canon interne.

Une des meilleures répliques que j'ai acheté !
Pour 170€ (acheté 140 en promo), vous aurez une réplique légère mais résistant. Très performante quelque soit le mode de tir. Avec une 11,1 V (merci petit mosfet), le semi est réactif et le full/rafale a une très bonne cadence de tir.

Le chargeur feed très bien et est de bonne facture également.

La crosse rabatable et réglable est très très agréable.

Seul point négatif (vraiment le seul que j'ai trouvé et j'ai du bien chercher ...) : petite chauffe au niveau de la connectique batterie lors des tirs en rafale répétés.

Je recommande ++

Superbe réplique de AK12 proposé par WELL PRO avec mosfet intégré, changement rapide de ressort, full polymère, légère rapport qualité/prix imbattable. Gera sensible j'ai changé un set de gear dessus qui a cassé en faisant quelques test (400fps)

Réplique essayée sur terrain avant achat grâce à un camarade. Fiable, légère et efficace ! Idéale pour débuter en rapport qualité / prix, d'autant plus que c'est de l'AEG

Pour tous les fan d'AK allez-y sans hésiter.

Service client - envoi au top également, un plaisir d'avoir commandé par cette plateforme

170 euros pour une réplique hors norme, avec un bon poids et des performances vraiment incroyables en sortie de boite, le chargeur bouge très légèrement mais feed vraiment bien.

Elle dispose d'un MOSFET performant, avec un cycle de 15 billes secondes et un canon 6.03 avec un joint qui permet de lever facilement de la 0.28 a plus de 50 mètres.

Je pense que c'est la meilleure réplique niveau rapport qualité/prix que j'ai pu acheter avec un look d'ak12/23 qui n'est pas commune sur les terrains

Superbe réplique, efficace en sortie de boîte. Que du bonheur. Je l'utilise plutôt en terrain ouvert, c'est la version longue. Mais aucun soucis, de plus elle est légère avec ses matériaux. Même si habituellement je préfère le full métal, la pas de problème. Grace au service de mises à niveau, 300 fps je peux l'utiliser partt

Très bonne replique Le MOSFET a bien été corrigé par rapport au modèle WE06 ( PPK20 ) advanced et son problème de repliques branché a une batterie mais MOSFET inertes par moment.

Réplique bien étanche et bien calé d'origine, bonne portée et puissance d'origine de 395fps a la 0.20g

Alors par contre c'est pas des roulements à billes mais des bushing 8mm acier CNC, le piston a toutes les dents métal, le Nozzle de 20.70mm a un joint torique et surtout présence d'un moteur hi torque bien coupleux alors une fois le précocking réglé c'est ultra réactif


Bref encore une très bonne replique en fibre de nylon bien fini et ultra léger pour 170€ c'est vraiment du pay to win

Perfect
Light and cheap really good for budget builds
Also comes with an jamming rod to un jam the jammed bb's
The only thing I forgot is to get a battery for it but its fine great
Also looks great with jj airsoft 1p87 red dot

The ak12 is a very good looking replica and i was suprised how sturdy it felt, There is only 1 downside the pin holding the dust cover can wiggle loose during airsoft matches, But other than that it is a solid rifle

Amazing replica ! I bought it with promo (140€) and honestly it's worth it totally !

Design :
Really nice realisation, there is no space in between parts of the replica, everything is holding nicely.
Quality of the polymere is nice with really cool marking. The adjustable rifle stock is amazing really confortable.
Hop up with number = easy to adjust

Performance :
400 fps announced for 380 - less than 1.2 J. I'm shooting with 0.30 bbs in forest and the range is 50 meters easy with no disturbance (no upgrade made) - you can reach 60 m with losing maybe 2 bbs over 10.

I can only recommend

TLDR: Gears are made of cheap metal and low quality and may break very early, upgrade to stainless steel ones as soon as you can.

The gun looks and performance nicely. The polymer is of decent quality and overall it is not too heavy so is easy to use. The picatinny raills are a nice addition and make it easy to mount attachments. The programmable features on this are also handy enough which is surprising to find in this price point.

However after around 10 hours of use with the recommend Li-Po 11.1v battery from the listing, the gun broke. After looking into it, the gears on this snapped, the teeth as well as one of the stems that hold the gears in place snapped off. This lead me to having to replace all the gears in the gearbox to stainless steel ones which is a long and tedious proccess that cost me quite a bit.

I purchased this replica exactly a year ago (June 2025) and have used it for every single game day I've gone to since.

Positives

The replica is yet to produce any major problems for me, both with internals and externals, however I did pay the extra for the tune-up service if that matters.

Out of the box the replica fired perfectly, very accurately and INCREDIBLY smoothly (0,25g BB's), I pretty much did not even have to mess with the hop and I was hitting very accurate shots at range, the BB's were just flying perfectly. Paired up with the HD118 sight I was getting some very nice eliminations on the game days and even got a lot of praise for the rifles performance.

I've abused a lot of full auto on it with an 11.1V battery from gens ace (1400MAh), along with single and binary and I haven't had any issue with feeding at all, 7.4V battery I've used on it as backup also works like a charm.

I use the stock magazines provided with the replica (I bought 4 extra from Well Pro) and all of them are functioning perfectly fine, and feed nicely even though they have taken quite a lot of drops.

The QD mount hole for slings on the back of the gun has been very sturdy for me and out of all the games I've gone to it's only unbuckled ONCE, and I'm pretty sure that was user error with my vest's gear somehow pressing the QD button.

Pretty much the whole replica is built of polymer, the barrel and the muzzle break are made of some sort of metal and the muzzle has withstood a lot of hits to walls (from my mishandling in CQB) and the only thing that has happened is the paint chipping off (which honestly makes the gun look more weathered).

I've also dropped the weapon from chest height (I'm 187cm tall) due to the QD mount popping off and the replica took it like a champ.

The folding stock works perfectly fine with my QD sling, it locks in place nicely.

Negatives

The second magazine release under the trigger guard (even though it's a cool addition) has caused me quite a few magazine drops because when slinged on me it somehow catches onto my vest and the latch gets pressed, releasing the magazine.

Speaking of the magazines, the ones that come with the replica and also the ones from Well Pro themselves have A LOT of wobble when inserted into the replica, like a very considerable amount of wobble compared to my cheap CYMA AK I got 6 years ago. It hasn't caused any problems for me with feeding or anything like that, but the wobble doesn't feel high quality. I haven't tested any other magazines.

I have noticed sometimes that the pin that holds the upper receiver in place (not very often, maybe like 5-10% of the games I've been to), likes to get pushed out of place and if gone unnoticed you could have your upper receiver fall off on you, exposing the battery, but if noticed quickly you can just tap it back in place.

The grip's connection with the rest of the gun feels fragile (?), I don't know how to explain it but when holding it from there with 1 hand it doesn't feel rigid and it feels like the replica would break at the grip (I doubt it, but still good to mention)

This isn't really a negative but the cheek riser on the stock is sometimes hard to mess with and pull up/down and it also feels kind of fragile, as if I'm going to break it if I use too much force, but that could be my fear of damaging my equipment.

Conclusion
The replica, for it's money (especially if you get it on sale at 135 euros I believe), is absolutely worth it and IMO a very good beginner replica for people looking to get their 1st long lasting replica or to replace their 1st cheap replicas.

I don't believe the negatives are THAT serious, I still had to mention them though and for me the positives far outweight what the negatives bring to the the table.

I bought this replica at full price (went on sale 2 weeks later unfortunately hahaha) and I have not regretted my decision AT all.

It also looks extremely good paired with a RK-0 replica and just Russian looking attachments in general.

I'm giving it 4 stars due to the negatives explained above in build quality, if I could rate only the internals though, I'd give it a 5 star.

It SHOULD be noted that I bought this replica when they had JUST landed on the site a year ago and all of the negatives I've talked about COULD have been fixed by now with later iterations (if Well Pro has done that).

This airsoft rifle performs flawlessly — everything works exactly as it should. The build quality and craftsmanship are excellent, even though the body is mostly made of plastic. It still feels solid and well put together.

One of the standout features is its compatibility: no matter which magazines you use — whether from Cyma or S&T — they fit perfectly and feed reliably without any issues. This makes it a very versatile and dependable choice for players who already own gear from different brands.

I have the smaller and the long version, and both are supreme.

This airsoft rifle performs flawlessly — everything works exactly as it should. The build quality and craftsmanship are excellent, even though the body is mostly made of plastic. It still feels solid and well put together.

One of the standout features is its compatibility: no matter which magazines you use — whether from Cyma or S&T — they fit perfectly and feed reliably without any issues. This makes it a very versatile and dependable choice for players who already own gear from different brands.

Highly recommended for anyone looking for a reliable and well-built airsoft weapon!

Cześć
Jeśli zastanawiacie się nad repliką nowoczesnych karabinktów rosyjskich to jest właśnie to.
Bateria której używam to detykowana 11.1v ale mieści się na styk że trzeba kabelki odginać lekko aby wszystko było dobrze. Słyszałem wiele negatywnych opini ale po prostu trzeba szanować swój karabinek,kolby nie reguluje bo jest to zbędne przyrządy celownicze są dobre , regulowane hop-up, garbox ustawiany na strzały 2 i 3 czasami nie nadąża napinać sprężyny i lecą 2 kulki na raz ale już tłumaczę dlaczego.Przy zamówieniu wybrałem zły silnik przez co mam stokowy, środek po strzelaniu jest gorący ale nie tak bardzo.Kupując zestaw najlepiej go zmodyfikować na 450fps jak ja tylko kupcie krótki dobry silniczek.
Karabinek kupiony ze zniżką za 580 zł plus modyfikacje:
Usługa regulacji (ponowne podkładkowanie i smarowanie skrzyni biegów)
Sprężyna AEG 130 m/s [Guarder]
70° Ulepszona gumka HOP-UP do AEG [GUARDER]
Pierścień uszczelniający głowicy tłoka AEG - 2 szt. [AP]
Kompletny tłok z 15 zębami stalowymi [CYMA]
Cylinder ze stali nierdzewnej typu zero [ZCI]
Plus usługi montażu części

So , I got this rifle and at first I was exiteded to play whit . It ran well , was quite perfect for CQB and Outdoor games , but now . Soon to realise that the plastic body is tearing apart . Handle is coming out of the main body and upper part ( above battery holding) is secured two plastic hooks which easily break off by gently taking the top off to insert the battery .

Be careful of this gun , it is good , but it has a lot of design flaws which are detrimental

It's a fantastic beginner rifle! It feels really comfortable and robust and it shoots like a dream. My only complaint about the replica is that the lug that keeps the dust cover in place likes to randomly slide out and I'm pretty worried that the entire dust cover might come off in more tense situations, but other than that it's a great replica for the price.

responsive with an 11.1v
works great, hop up is like arcturus
hops .32s with ease.
def. feels polymer but is lightweight.
would reccomend at the 90$ price point I bought it at any day.
Would love to see a nice aluminum or steel body version

Great looking replica, performance of it seems to be adequate (my replica was chrono'd at 375-380fps, bought at 400fps but i assume that is within excepted deviation).
It shoots decently far and the collapsing stock comes really handy for tigher spaces.

Can't say about RPS as all fields around me only allow single-fire but when messing around with the gun it seems high enough.
Currently paired with a 11.1V 1400mAh 25C battery which seems to be almost the perfect match.

Would recommend buying it when on sale, full price is still decent but definitely losing a bit of vfm.

Great gun for the price. Its made of extremely strong polymer and metal where needed. The polymer can be mistaken for metal its that good! Its extremely accurate at any range, the hop up is very good and can be easily adjusted. The trigger is very responsive due to the installed MOSFET. The cheekrest on the stock is also very convenient, it makes aiming a lot easier and helps you find the right place for your cheek instantly. The barrel also has a 14ccw thread on it so you can install tracers, suppresors or whatever you would like. Ive brought this gun to the field already and its gotten a good few compliments for how unique it is. I love this gun a lot and would recommend for someones 1st airsoft replica or 10th airsoft replica. 5 stars all over!

Unfortunately, it is mostly plastic, so it is not a very durable weapon, its shape is attractive, but unfortunately all plastic parts move quite a bit, the ETU shoots twice at lower (not discharged) battery voltage, regardless of programming.
It's definitely not worth the full price, it was a good deal on sale.

The Well Pro WE09 has a lot going for it for the price. Especially when you get it on sale, as I did, for 144.78€. It's a steal for a gun with good quality polymer (with metal inserts where needed), a 450mm 6.03 precision inner barrel, a programmable mosfet with pre-cocking, rotary hop-up unit and ambidextrous fire selector and mag release thats makes the AK platform much more user friendly. Its trigger response is really good, even with a 7.4v lipo.

Some lesser good things:
-Hop-up bucking is meh
-Stock wobbles when locked

More of a nitpick, but mags wobble too. They feed perfectly and have an extended follower, so you don't lose many BBs when taking the mag out.

All in all, I strongly recommend this as a first AEG or as a nice backup.

This is a very nice and good gun. It is true the body is mostly plastic, but it is light. (The spaiater is not of Better quality anyway- I think) The gun is accurate. Two-handed. There is no problem whit the electronics either. A gift for that much money. I love it. I can only recommend it to everyone.

This is a very nice and good gun. It is true the body is mostly plastic, but it is light. (The spaiater is not of Better quality anyway- I think) The gun is accurate. Two-handed. There is no problem whit the electronics either. A gift for that much money. I love it. I can only recommend it to everyone.

At first i was sceptical about the replica performance and the outer and inner quality of the we09.
But all my prejudices went away the moment i opened the box and tested the ak 12 .
It is lightweight replica thanks to its body being metal/ polymer. Really great foldable stock and cheek adjustment , you can put a lot of attachments and it is well made to look exactly like the ak12 6п70 variant .
The adjustable hoo up is easily reachable and the replica shoots smoothly.