Réplique CM.056M Full Steel AK Eshooter ETU [CYMA]

Bonne réplique, externe solide parfait pour les petits budgets, malheureusement les finitions sont pas top, les câbles sont arrivés un peu corrodé et l'emplacement batterie dans la crosse est mal usiné.
Mais sinon elle tape fort en sortie de boite et est assez réaliste, bonne cadence et réactivité, j'ai entendu de problèmes de mosfet chez cyma donc à voir dans le temps.
Cependant au vu de son prix très abordables et son rapport qualité vraiment bon, elle fait une bonne réplique.
Je la déconseille au débutant, car il risque de falloir faire des modifications interne assez rapidement si vous l'utilisez beaucoup.

Very well made and solid gun, feels good in the hands and is very good looking. Shoots very precisely and fast. Is easy to operate and maintain. Internal machinery is very precise and made of quality materials. Only problems I saw vere slight machining problems to the inside of the wooden stock but it is to be expected for this price. There was also slightly torn wire insulator inside(I'm guessing from assembly in the fatory). But all in all very good gun recomend!

The CM.056M model is of high quality, with good internal components in the price/quality ratio. As a person who is an enthusiast for weapons of the AK-47/74/AKM type and other variations like me, I was very much looking forward to the weapon, especially the platinum version from the Cyma company, where this series is famous for its quality workmanship in the price/quality ratio. This is my first airsoft gun of better quality, so I was looking forward to the weapon even more. Unfortunately, I have a few reservations about it.

I probably got a defective piece, because the cable at the gearbox was significantly damaged when inserted into the body of the weapon (signs of brute force when inserted into the body of the weapon, I was suprised that the cabel was not cut in half lol) and it was immediately visible that instead of moving the cable a centimeter to the side, the worker clearly did not think much about it and inserted it there as its condition correspond to it; frayed wiring, fortunately I managed to carefully remove it from body of the weapon and tape it with insulating electrical tape and put it back carefully. So far it works without problems.
I also discovered that the wrong screw was inserted (it was 6mm shorter, so it couldn't attach to the thread at all) for the gun grip, which is attached to the thread on the motor, which is not a defect at all, but just a minor inconvenience that can be solved by buying a new M4x16mm hexagon screw.
Furthermore, the spring was missing from the pin on the sight that holds the muzzle break to the gun, which I personally don't mind, since I used a different muzzle break anyway, but again it was another inconvenience that shouldn't happen with a gun for 340€ (I would understand it with an airsoft gun at a completely different price range, but not here).
Finally, I discovered that the wooden stock has a crack in the area for the screw, most likely someone from the factory tightened it too much or it is another manufacturing defect.

Also when purchasing this weapon, the description stated (and recommended) a T-stick type of battery (however, a Mini-block type battery will fit properly in the stock), which yes, can be used here without any problems, unfortunately you will have to rewire the cable from the stock and route it through the grip space to the the space under the dust cover. It will require patience and a bit of nerve, but it can be done without any problems.

Shipping and dispatch of the order was completely without any problems and very fast - I received the shipment within 2 days. I really appreciate that, because often even from a local e-shop the shipment does not arrive in such a short time. The packaging was also perfect, thumbs up.

Overall, I really appreciate and praise the speed of dispatch, shipping and overall approach. Unfortunately, I received the model that I received. I would definitely not recommend it for new and inexperienced players or people who are not very technically capable of handling and repairing things (disassembling the entire AK was quite a challenge for me, especially the pins themselves, which were quite tight, but Uncle Hammer and a Uncle Screwdriver managed it), I would recommend another weapon to them. Otherwise, I am thrilled with the design, whether it's the wooden parts, the all-metal weapon or interna parts in gearbox.
I give 4 stars instead of 3 stars that I wanted to give because I love AKs and I hope I was only one who had those mentioned problems with the gun.

After a long wait, it is finally here. When the cyma platinum cm.056m came out I bought it right away and I am very satisfied with my purchase.

Ordering:
Ordering was easy and fast. Through the “Recommended accessories” I could easily order the corresponding magazines, batteries, etc. The only downside is that the 1000mAh 11.1v Li-Po battery recommended does not fit the stock. Also, when ordering, make sure you order this replica with the correct FPS.

Delivery:
Same day the package was shipped within 2 days I had it inside. The package is packed so well that it did not get damaged in its journey to me (Netherlands), and we all know how package deliverers handle packages.

Price and Quality:
The price is on the high side, but you get a decent replica in return. The replica is of high quality. I have yet to find a part that is lower quality than the rest. The muzzle on the front can easily be taken off to attach a 14mm tracer unit to it. The points to connect a sling are also sturdy.

conclusion:
For the airsofter who is looking for a good AKM and could spare the money I would recommend the Cyma Platinum CM.056M. The replica is of good quality and is delivered quickly.