Replika CM.056M Full Steel AK Eshooter ETU [CYMA]
Cena bezpośrednio przed obniżką: $319.35
-
Formy dostawy
Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy
-
Dane techniczne
Producent: Cyma Platinum Kod: FB4197E EAN 5904420017530 Waga 3310 g Model Repliki Replika Airsoft AK47 / AKM / AK74 Kolor czarny Materiał drewno, metal, polimer Rodzaj magazynka mid-cap Rodzaj ognia ciągły, pojedynczy Materiał magazynka stal Akumulator w zestawie NIE Rodzaj wtyku akumulatora T-connector Wersja gearboxa v.3 Rodzaj łożysk stalowe ślizgowe Okres gwarancji 12 miesięcy Amunicja .23g, .25g Długość mm 915 Pojemność magazynka kulek 140 Długość lufy wewnętrznej mm 455 Energia wylotowa pocisku J 1,3 Prędkość wylotowa pocisku fps 390 FPS z kulkami 0.20g Średnica lufy wewnętrznej mm 6.03 ETU MOSFET TAK Materiał korpusu stal -
Recenzje
Dodaj opinię-
- 06.03.2026 napisał:Very well made and solid gun, feels good in the hands and is very good looking. Shoots very precisely and fast. Is easy to operate and maintain. Internal machinery is very precise and made of quality materials. Only problems I saw vere slight machining problems to the inside of the wooden stock but it is to be expected for this price. There was also slightly torn wire insulator inside(I'm guessing from assembly in the fatory). But all in all very good gun recomend!
-
- 16.07.2025 napisał:The CM.056M model is of high quality, with good internal components in the price/quality ratio. As a person who is an enthusiast for weapons of the AK-47/74/AKM type and other variations like me, I was very much looking forward to the weapon, especially the platinum version from the Cyma company, where this series is famous for its quality workmanship in the price/quality ratio. This is my first airsoft gun of better quality, so I was looking forward to the weapon even more. Unfortunately, I have a few reservations about it.
I probably got a defective piece, because the cable at the gearbox was significantly damaged when inserted into the body of the weapon (signs of brute force when inserted into the body of the weapon, I was suprised that the cabel was not cut in half lol) and it was immediately visible that instead of moving the cable a centimeter to the side, the worker clearly did not think much about it and inserted it there as its condition correspond to it; frayed wiring, fortunately I managed to carefully remove it from body of the weapon and tape it with insulating electrical tape and put it back carefully. So far it works without problems.
I also discovered that the wrong screw was inserted (it was 6mm shorter, so it couldn't attach to the thread at all) for the gun grip, which is attached to the thread on the motor, which is not a defect at all, but just a minor inconvenience that can be solved by buying a new M4x16mm hexagon screw.
Furthermore, the spring was missing from the pin on the sight that holds the muzzle break to the gun, which I personally don't mind, since I used a different muzzle break anyway, but again it was another inconvenience that shouldn't happen with a gun for 340€ (I would understand it with an airsoft gun at a completely different price range, but not here).
Finally, I discovered that the wooden stock has a crack in the area for the screw, most likely someone from the factory tightened it too much or it is another manufacturing defect.
Also when purchasing this weapon, the description stated (and recommended) a T-stick type of battery (however, a Mini-block type battery will fit properly in the stock), which yes, can be used here without any problems, unfortunately you will have to rewire the cable from the stock and route it through the grip space to the the space under the dust cover. It will require patience and a bit of nerve, but it can be done without any problems.
Shipping and dispatch of the order was completely without any problems and very fast - I received the shipment within 2 days. I really appreciate that, because often even from a local e-shop the shipment does not arrive in such a short time. The packaging was also perfect, thumbs up.
Overall, I really appreciate and praise the speed of dispatch, shipping and overall approach. Unfortunately, I received the model that I received. I would definitely not recommend it for new and inexperienced players or people who are not very technically capable of handling and repairing things (disassembling the entire AK was quite a challenge for me, especially the pins themselves, which were quite tight, but Uncle Hammer and a Uncle Screwdriver managed it), I would recommend another weapon to them. Otherwise, I am thrilled with the design, whether it's the wooden parts, the all-metal weapon or interna parts in gearbox.
I give 4 stars instead of 3 stars that I wanted to give because I love AKs and I hope I was only one who had those mentioned problems with the gun. -
- 10.07.2025 napisał:After a long wait, it is finally here. When the cyma platinum cm.056m came out I bought it right away and I am very satisfied with my purchase.
Ordering:
Ordering was easy and fast. Through the “Recommended accessories” I could easily order the corresponding magazines, batteries, etc. The only downside is that the 1000mAh 11.1v Li-Po battery recommended does not fit the stock. Also, when ordering, make sure you order this replica with the correct FPS.
Delivery:
Same day the package was shipped within 2 days I had it inside. The package is packed so well that it did not get damaged in its journey to me (Netherlands), and we all know how package deliverers handle packages.
Price and Quality:
The price is on the high side, but you get a decent replica in return. The replica is of high quality. I have yet to find a part that is lower quality than the rest. The muzzle on the front can easily be taken off to attach a 14mm tracer unit to it. The points to connect a sling are also sturdy.
conclusion:
For the airsofter who is looking for a good AKM and could spare the money I would recommend the Cyma Platinum CM.056M. The replica is of good quality and is delivered quickly.
-
-
Zapytaj o produkt
AK Full Steel z ETU - CYMA Platinum — sprawdź inne produkty z serii
Replika CYMA Platinium CM.056M to doskonałe połączenie solidności wykonania, autentycznego wyglądu oraz nowoczesnych technologii. Korpus niemal w całości wykonany został ze stali, a całość uzupełniają wysokiej jakości elementy polimerowe oraz drewniane, co przekłada się zarówno na realistyczną prezencję, jak i wysoką odporność na zużycie. W środku znajduje się mosiężna lufa wewnętrzna 6.03 mm oraz nowoczesny gearbox V3 z systemem szybkiej wymiany sprężyny i wydajny silnik neodymowy high torque, które zapewniają niezawodność i płynną pracę w trakcie rozgrywek. Dodatkowo, elektronika ETU V3 Kestrel znacząco podnosi osiągi repliki. To idealna opcja dla tych, którzy oczekują więcej niż tylko podstawowej wersji karabinka AK.
Idealna dla kolekcjonerów
Model CM.056M wzorowany jest na karabinie AKM - modernizacji legendarnego AK-47 opracowanej przez Michaiła Kałasznikowa w 1959 roku. Broń szybko zdobyła popularność wśród sił zbrojnych Układu Warszawskiego, a jej produkcję prowadziły m.in. zakłady w Tule i Iżmaszu. AKM zachował klasyczną, drewnianą kolbę, jednak uproszczenie konstrukcji umożliwiło łatwiejszą produkcję seryjną. Powstało wiele jego wersji, jak AKMS, AKML czy AKMP, a w 1974 roku został zastąpiony przez nowszy model - AK-74.Solidna konstrukcja stalowa i detale inspirowane oryginałem
Replika została wykonana w pełni ze stali, obejmując komorę zamkową, lufę zewnętrzną, podstawę muszki, składaną kolbę, rurę gazową oraz mechanizmy celownicze. Gwarantuje to sztywność konstrukcji, trwałość i realistyczne odczucia podczas użytkowania. Do wykonania chwytu pistoletowego wykorzystano solidny polimer, natomiast kolba, łoże i nakładka zostały wykonane z drewna. Wszystkie elementy są dokładnie spasowane, co zapewnia brak luzów i precyzyjne działanie.Komponenty wysokej klasy
Wewnątrz repliki znajduje się nowy gearbox V3 od CYMA z funkcją szybkiej wymiany sprężyny - wzmocniona wersja z łożyskowaną prowadnicą sprężyny. Współpracuje z zębatkami CNC 13:1 typu high-speed short stroke, które cechują się lekkością i dużą wytrzymałością. Silnik high torque z magnesami neodymowymi zapewnia szybką reakcję i dynamiczny cykl pracy. Klasyczna, metalowa komora hop-up AK współpracuje z precyzyjną lufą 6.03 mm o długości 500 mm. W systemie pneumatycznym zastosowano szczelne, aluminiowe głowice i tłok z pełną stalową szczęką, co przekłada się na większą wydajność i żywotność.System ETU V3 Kestrel zapewnia:
- Semi-Binary - możliwość aktywacji trybu Binary w ustawieniu Semi. (To rozwiązanie sprawia, że po naciśnięciu spustu wystrzeliwana jest jedna kulka, a po jego puszczeniu - druga.)
- Auto-Burst - opcja strzelania seriami w trybie Auto. (Tryb Auto można przeprogramować, aby zamiast serii ciągłej strzelał serią 2-5 kulek (Burst))
- Pre-Cocking - wybór jednego z 5 poziomów wstępnego napięcia sprężyny. (Funkcja ta sprawia, że po każdym strzale sprężyna jest częściowo napięta - co skraca czas reakcji. Użytkownik może wybrać jeden z 5 poziomów.)
- Dodatkowo system chroni akumulator przed przeciążeniem.
W zestawie:
- Replika CM.056M
- Magazynek
Rekomendowane akcesoria:
- Magazynki: Metalowy Mid-Cap na 150 kulek do AK47/AKM - Black [BattleAxe], Magazynek Mid-Cap na 140 kulek do serii AK74 - Battle Worn [A&K]
- Akumulator: Akumulator Li-Po 1100mAh 11,1V 20C - Deans [IPower], Akumulator Li-Po 1100mAh 7,4V 20C - Deans [IPower]
- Ładowarka: Kompaktowa ładowarka LIPO B3Pro Każda replika przechodzi przegląd zerowy, podczas którego jest sprawdzana i przestrzeliwana na chronometrze firmy XCORTECH X3200.
Bezpieczne i świadome użycie
Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
Instrukcja obsługi - Replika CM.056M Full Steel AK Eshooter ETU [CYMA]

Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent

KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH
Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu