[Ensemble] CM.045A [CYMA] + Rail couvre culasse AKS-74U [CYMA] + Viseur point rouge airsoft VZ-1 [JJ Airsoft]

Très bonne réplique en un mot, superbe!
En une vingtaine d'années d'airsoft j'ai eu pas mal de répliques et celle ci m'a vraiment convaincu en tous points.

Solide à l'extérieur et à l'intérieur, très réaliste, bien finie et cerise sur le gâteau j'ai choisi la version avec l'etu kestrel, un pur bonheur ça tourne comme une horloge !

Un petit ressort m100 une batterie 11v le bon joint hop up et c'est un régal, juste ce qu'il faut de cadence, une réactivité sans faille, c'est une réplique que je vais garder longtemps, je l'adore!

Une batterie de

Très belle reproduction du vsor-1, bonne qualité mais j'ai un soucis sur le mien je trouve la lentille trouble du coup la visé avec les 2 yeux ouvert devient problématique.... 4/5 a cause de ce petit souci.

Parfait sur mon ak74u de chez specna arms tient bien fait bien le taf et est livré avec une goupille au cas où , n'alourdit pas le poids est plus que correct verifié bien la compatibilité de l'accroche du couvre culasse avant


je recommande.

Viseur très bien reproduit livré avec ces accessoires kill flash,réhausseur de rail,une paire supplémentaire de protège optiques seulement un réglage de 3 intensité pile AAA non fournie inconvénient le rail ne rentrer pas sur mon rail picatinny j ai été obligé de le limer pour l adapter ça ne rentrer pas d origine pourquoi je ne sais pas de plus quand on l éteint il me semble que le point rouge ne s éteint pas entièrement donc risque d usure de la pile autrement bonne qualité mais un peu cher

Je suis simplement fan de ce red.dot. fonctionne parfaitement et donne un look de dingue sur l'ak12 well pro. Je le recommande a 100%.
En plus il est fournit avec un kill flash, et d'autre protection. Le réglage est simple.

Parfaitement compatible pour AKS74U (CM.045A) full métal, parfait pour rajouter n'importe quel accessoire / optique sur la réplique. Fourni avec la nouvelle goupille, heureusement pour moi car l'ancienne n'était pas récupérable.

Bon petit red dot.
Réglages faciles, le point rouge est net.
Seulement 3 réglages d’intensité, suffisant pour l’extérieur mais peut-être limitatif pour du CQB intérieur.
La boite est bien garnie et la possibilité de le monter en position haute ou basse (avec et sans réhausseur) est bien.

Pas encore utiliser en jeux donc je ne connais pas sont autonomie.
Par contre j'aime les piles AAA du coup quelque piles rechargeable d'avance et je sais que je ne serais pas en panne.
Le look la finition est tres jolie il a est bien solide de plus les plage de réglages sont parfaite, bien cranter ca ne bouge pas s meme sur un gbbr.

Se pose bien sur l'aks74u de chez cyma, quand vous remplacez la goupille, ne remettez pas celle d'origine, elle est trop courte.

Le viseur point rouge est de bonne qualité, conforme à la description. De plus il ira parfaitement dans un set full Zenitco.
———
The red dot sight is of good quality made, consistent with the description. In addition it’s going to fit perfectly with a full Zenitco set.
———
Celownik kolimatorowy jest dobrej jakości, zgodny z opisem. Dodatkowo idealnie będzie pasować do pełnego zestawu Zenitco.

Super réplique !
Envoie très rapide, je l'ai commandé mardi et je l'ai reçu le vendredi matin.
Pour ce qui est de la boite, elle est nickel, tout est bien immobile avec la mousse, le chargeur est bien et la molette est facile à tourner, tige, chargeur de batterie et batterie sont aussi bien rangé.
La réplique a vraiment une bonne sensation en main, boit véritable et full métal avec acier et alu et elle fait son poids.
La puissance est impressionnante et elle claque bien !
Au top !
( on peut mordre un viseur picatinny sur l'espace vide de la mire pour garder sont aspect compact )

J' ai Acheter au Hazard, Je pensais pas mai ça passe sur une grk74 de chez G&G sans trop besoin de bricolage juste dégagé l' axe de rotation g&g d'origine et OP avec un peu de talent c Top merci twgun

Superbe red dot !!! Même taille qu'un T1 mais en version russe. C'est une reproduction du VSOR-1. Allumage et réglage de l'intensité lumineuse par des bouton sur le coté gauche. Son support rehaussé permet de garder la visée mécanique utilisable. Parfait pour compléter un custom d'AK Zenitco !!!! :)

Très bon top cover
Super pour remplacer celui d'origine, cela permet de fixer un red dote sans gêner à l'ouverture du top Cover, pour remplacer la batterie, c'est top.
Elle a une belle finition et reste dans un matériel qui respire la qualité et la solidité
Pour la mise en place :
Retiriez la goupille creuse à la jonction du top cover et de la réplique.
Astuce :
Pour installer le top cover, armée vous de force et d'un bonne apui cela demande quelque essayer avant de l'installer correctement

Nickel Pour mon Ak-75u E&L nécessite parfois un peux de bricolage mais fonctionne très bien c’a change la vie pour enlever la batterie sans retirer l'optique.

Un coupe de Bombe peut être envisager en fonction de la couleur de votre AK.

Più che soddisfatto, il pezzo si cambia in 4-5 minuti e si adatta perfettamente ad un cyma platinum CM.055 permettendo di montare un dot avendo accesso diretto al vano batteria

A great solid red dot for your russian style airsoft replica.
Also props to the service team of taiwangun for the great support.
I received a defect on arrival red dot and they coverd all the shipping costs and deliverd me a replacement one.

Works fine on CYMA AKs74u (CM035).
I've replaced the OEM pin with an M3 screw.
No wobbling even with a heavier optics.
Pro for me is the iron sight replacement, not so accurate, you get too much free space between the front and the rear sight, but on CQB it's fair.

It's a really high quality product, the wooden handle and the metal reciever (and all the other metal parts, because it's FULL metal, each and every part of it) really gives me the feeling of a real aks74u, and it's completely identical with it too, so if you are a milsim-fan, then you obviously need this replica, because even holding it makes me happy (and hopefully everyone else who chose this replica)
Out of the box, it's a really good gun too, adjusting the hop-up couldn't be any easier to do, you just slide back the charging handle, and there it is, you just have to adjust the slide, amd that's it.
This replica comes woth a cleaning rod, and an 1200 mAh battery, I don't say it's the best battery ever, but hey it's free, so you shouldn't espect a high quality battery, I don't mean it's not good, I just don't use it as often, because the cable that you can connect it to the gun is really short, so you can't completely slide it to it's space (which is in the handguard above the gun barrel), so I recommend buying at least two batteries (those have longer cables and fit perfectly), but it's important, that you need 8.4V stick batteries, because it won't work as good as it should with a stronger or weaker battery, so be careful!
I personally recommend relubricating the needed parts and you don't have to because it works great with the stock hop-up too, but if you want the best behalf of this replica then change the hop-up, but once again, it works perfectly with the stock hop-up
It's also important that this replica has no rails (obviously) sk you have to buy an ak mount for it, or a railed top reciever, and then you can use it with any dots or scopes, but if you want the og krinkov feeling then leave it as it is and enjoy it.
One more thing, it comes with a high cap (I think 500bb) mag which is pretty good quality plastic, so it won't break.
Thanks for reading this, I hope it helped, enjoy your replica!

Fits WE AKS-74U , but is a bit too wide. Get a vice and press it together.

Does come with a pin out of rolled metal, for fitting into trunion. Screws on the inner side of the dust cover might need tightening to eliminate RIS rail wobble.

A must upgrade for the aks 74, the original broke so the replacement was an upgrade, fitted a red dot on it and it works perfectly. comes with hardware and it is a quick easy replacement. very good quality!

Very useful product if You are an AK user, It's long enough to receive 3-9x scope. I'm perfectly satisfied with it. Perfect price-value ratio. The package contains the axle too, very easy to install it.

A must have for any AKS-74U setup, as it is far more practical in my experience compared to a side rail, as you can access the battery space without needing to remove any parts. I highly suggest getting the shop to install the rail, as without the proper tooling i ended up scratching up my pin location. The installation is worth the money, compared to the headache and time wasted doing it yourself (which i did with a hammer and screwdrivers). Looks great, feels secure. A must-buy.

This is a solid red-dot made out of aluminium and clear glass. It's got enought brightness to be seen during the day. You can zero it in, and it'll hold zero just fine. Perfect for two eye shooting and staying true to your Russian bias larp. The sight comes mounted on a high mount so you can still use the AK iron-sights. But you can also remove the stilts inbetween for a low mount. It might be a little hard to aim the MOA2 size dot, but you'll learn to aim with it.


(If the red-dot blinks before turning off, your battery is dead.)

One of the best rails for the top of an ak, fit snug but is still able to fold up.

Different sized roll pins however so don't lose the one with the packaging.

If you're looking for a lot of rail space this isnt the best, you can only fit 1 red dot or sight on it, no magnifiers or holo combos unfortunately

This optic is solid and very durable. It has several additional parts just like honey comb kill flash and protective caps with different styles.
The brightness of the red dot is visible even during daylight and it is easy to adjust it's brightness with the buttons.
It has a weight but you receive an aluminium mad red dot which in this case is a guarantee of quality. 10/10

Bought 2 of this in pair. One working just fine other one had some problems with plus and minus buttons. But support from taiwangun was good and they responded in time. Other one works fine and holds zero after 2 games of active playstyle. Worth it in my opinion quality is very good and using aaa batteries which are very common.

Tökéletesen illeszkedik a modellre (CM.045a)
mindenféle gond nélkül telepíthető ami kb 10 percet vessz igénybe. Személy szerint örültem volna ha ugyan olyan irányzékot kap mint az eredeti de ez is megfelel.

Ak74 acessório top cover em alumínio/metal que encaixa perfeitamente em ak74u da Jing Gong com ebb. Material leve e de boa qualidade de construção que permite colocação de acessórios e miras tornando a arma mais tática. Bom upgrade para quem gosta de personalizar as réplicas

Nicely made, sturdy replica, much better than the cheap Chinese T1 copies, it comes with a raiser, killflash, clear lens protector and standard lens protector. The only downside is the missing instructions, it is not obvious which button does what. It seems it can be switched off by pressing the + and - buttons together.

Sturdy build and overall good quality but I don't like how attaching the honeycomb is permanent. Wish there was a way to remove it without damaging the ring. I also don't like that it relies on the 60 minute turn off instead of also having a normal off button.

It's totally fit on my Cyma 0.45, and it's working perfectly. It was not too hard to fit on my rifle, and it's look awsome now on my AK 74U. The material is strong, it's very good in quality! I will suggest this product everyone who want a nice sight/scope on his AK rifle. Easy to change it, good material, fit perfectly! Totally worth to buy it!

Wonderful compact red dot!
The dot is sharp, no problem with outdoor playing.
Almost too many settings.
The QD mount did not fit my lct rail. So had to modify the rail a bit.
Works great on my AKMSU now after the rail is modified.
Comes with many accessories.
Would buy again!

Bought this for my cm.045A, and it fits great! It was a bit difficult to get on at first if you’ve never done it before, but it holds great! The material is very nice. I recommend getting this instead of a side mount, due to the fact that
1. You have to take the side mount off every time to change the battery
And
2. The stock will not be able to fold with a side mount.
My optic fits great on it as well! (Victoptics rds)

Absolutely awesome gun! It is a bit hefty, but with a sling it’s fine. Shoots great and smooth, and is an absolute amazing gun for the price. If you live in the US, the charger that is in the box will not work in an outlet (it is European), so you will have to buy one yourself. Other than that it’s awesome! Highly recommend!

Perfect on cm.045. Enough easy to mount. The bolt is longer that the one of replica but works perfect

Very fast the spedition. In less a week I had the package

It's quite too much 200 chars for a piece review. Maybe 100 were enough.

The replica is just perfect for the price. You actually get more than you pay for. The wood is excellent the metal and paint are perfect. It shoots straight and accurate. It's a quality product and very realistic.

Fits my CYMA CM.045 very well. It has a slight gap at the front, but that might be an advantage if you plan to put wire through it for other gear and setup. Affordable price too. You need a hammer and a punch to punch out the pin. Fittin the pin back might needs some force due to the spring pressure of the upper handguard retainer.

Fits the cm.045a snuggly. A friend tried it on his and it fits too, we aren't sure of the moddel but it isn't a cyma, so it may be compatible with a lot of ak's.
It does make it slightly less convenient to change a battery while having a scope mounted, but it doesn't inconvenience you in the least while out in the field.
A side mount can be usually be installed on ak's and fitted perfectly by screwing it on, and this is meant to replace it. It doesn't really wobble, although my red dot is pretty small and light. Any wobble can be ultimately eliminated by putting in small cuts of paper.
Also, it's made of the same material as the original cover, it seems to be some sort of aluminium. Whatever it is, it's solid enough for airsoft.
Pretty great product.

Rail came in fast. When unpacking I was positively surprised of the finish and robust construction. Mounting took aproximately 5 minutes. After closing it tbere was absolutely no wobble of any kind!!
Real good buy, especially when playing CQB. This rail allows you to play stock folded.

Good quality dust cover, sturdy and solid.
Includes a rear sight block pin.
Does require slight modification, if you want to fit it to your E&L AKS74U:
You will have to slightly adjust the angle of the recess on your dust cover to be able to put your fire selector in safe position. Metal file or a dremel tool works fine for that.
Also the original e&l rear sight pin will not fit anymore as it is too short. Using the included pin works fine however.
The rear sight is shorter than the original, so you will be able to mount optics a few centimeters further up the dust cover for a longer eye relief.

Good replica out of the box. I love AK from CYMA. They are made to resist long time and to work hard for less money than other brands. This replica is short, good for cqb scenario and mil-sim as well. Nice quality, nice looking

The first time i held it, i was suprised how heavy it was, it's really high quality, and it fits perfectly on my cyma ak74u, and it also fits my e&l ak74u.
Excelent product, can't reccomend highly enough if you are building a tactical ak74u.

the aks I have is a a cm045-UN; there's a small gap at the junction and the pin needs to be squeezed with pliers to fit the ring. other than that, stable and sturdy.
and looks really well on the replica

This was my first Airsoft gun and I have to say, It’s truly amazing. Its built from sturdy material, has a fairly simple disassembling process, and most importantly, it looks and weighs like the real gun! The battery charger that comes with it is good but I recommend changing it when you can, as for the battery itself, it’s fairly good and will definitely last you for the entire day but if you want to buy a different one you might have trouble finding a battery that would fit in the compartment. It comes with a plastic Hi-Cap mag which i’ve had no problems with but I later changed it out with a metal Mid-Cap mag. Just keep in mind that most magazines probably wont fit into the gun but you just need to file down the back part on the top plastic piece of the magazine and it will fit perfectly. I saw reports online which said parts of the Rifle were rattling but personally i have not seen that on my gun but its nothing you cant fix with just a screwdriver. Overall i definitely recommend this gun, its my first product from CYMA and i will definitely buy again!

Really good quality and much better looking than most optic mounts for AKS74U replicas.
Big must have if you dont like the dovetail mounts.

+ Material feels nice and firm

+ still very light

+ more battery space

Really no Cons!

Nice part, perfect fit and great quality. Fits my cyma 74u with no issues.
No wobble, I have no worries about putting my vortex 3x spitfire optic on it or any other optic for that matter. Really solid build and great addition.

Does what it is supposed to do.
It fits my CYMA CM045A perfectly, doesn't wobble at all.
it is however a bit more heavy, especially with an optic, so that the dust cover doesn't spring op as easily.
that isn't really a problem though, just a tiny little bit anoying when changing batteries.

Love it! Shoots good and fast!
Cyma aks are perfect starter guns and also have lots of cool parts and internal upgrades!
10/10

Perfect for any starter but also for more experienced players that want low profile guns but also like the ak platform

Fantastic item, I customized my WE Ak74UN a lot and many parts had to be filed or modified etc. This was one of the few bits that worked great out of the box, a bit of hammering in the rod and that's it, mounted, I thouroughly recommend this cover. It also looks great with the matte black finish.

Works great. Bought it to swap the stock one on the 045C, so I could fold the stock and have an optic at the same time (side mount would get in the way). Installation was easy, hammer the old pin out (it comes with a new one), swap the dust cover making sure you reinstall the pin and spring which holds the top gas tube cover, finally hammer the new pin in.

CM.045A [CYMA

Really decent gun straight out of the box.
Would recommend to everybody looking for a cheap AK platform.
Only downside is that its hard to find fitting batteries for under the dustcover

I just love it. The little monster is very massive. When you get your hands on it, it feels like “it’s yes, it’s already something” and it has its own weight, which is neither heavy nor easy, I used it on all day games after a thorough review and a little update. It brought exactly what I expected from him. The bottom of the handguard is a bit stuttering, but since I didn't deal with it very minimally, not like the stock, which bothered me a lot, so I helped it with a little insulating tape, so it was stable. Very worth the price.

Works just fine. Have not had any issues with it yet. The only drawbacks are that the stock is a bit wobbly and the hop up adjustment lever was a bit loose. However the hop up was an easy fix with a screwdriver and a O-ring.

Overall a great gun for the price!

Excellent replica of AK47u. Feels nice and heavy in the hands. The wood is not premium quality but it is not bad either. There is no wobble anywhere except for a bit in the stock but that can be expected with this type of stock. There is a dovetail side plate already on there so it is ready to take a scope mount. The battery is under the dust cover which is exactly how I like my AK replicas. All my AK midcaps worked with it and fed properly. Would definitely advise a change of the hop-up bucking to improve the consistency of the shots.