+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

Rail couvre culasse AKS-74U [CYMA]

CYMA  FBP4153 | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: CYMA
    Code: FBP4153
    EAN 5901698418380
    Poids 220 g
    Couleur noire
    Matière aluminium, acier

  • Opinions

    • - 12.08.2025 A écrit:
      Parfait sur mon ak74u de chez specna arms tient bien fait bien le taf et est livré avec une goupille au cas où , n'alourdit pas le poids est plus que correct verifié bien la compatibilité de l'accroche du couvre culasse avant


      je recommande.
      Avis d'opinion: 0
    • - 13.08.2024 A écrit:
      Parfaitement compatible pour AKS74U (CM.045A) full métal, parfait pour rajouter n'importe quel accessoire / optique sur la réplique. Fourni avec la nouvelle goupille, heureusement pour moi car l'ancienne n'était pas récupérable.
      Avis d'opinion: 0
    • - 11.12.2023 A écrit:
      Se pose bien sur l'aks74u de chez cyma, quand vous remplacez la goupille, ne remettez pas celle d'origine, elle est trop courte.
      Avis d'opinion: 0
    • - 17.08.2023 A écrit:
      J' ai Acheter au Hazard, Je pensais pas mai ça passe sur une grk74 de chez G&G sans trop besoin de bricolage juste dégagé l' axe de rotation g&g d'origine et OP avec un peu de talent c Top merci twgun
      Avis d'opinion: 0
    • - 08.06.2023 A écrit:
      Très bon top cover
      Super pour remplacer celui d'origine, cela permet de fixer un red dote sans gêner à l'ouverture du top Cover, pour remplacer la batterie, c'est top.
      Elle a une belle finition et reste dans un matériel qui respire la qualité et la solidité
      Pour la mise en place :
      Retiriez la goupille creuse à la jonction du top cover et de la réplique.
      Astuce :
      Pour installer le top cover, armée vous de force et d'un bonne apui cela demande quelque essayer avant de l'installer correctement
      Avis d'opinion: 0
    • - 12.04.2023 A écrit:
      Nickel Pour mon Ak-75u E&L nécessite parfois un peux de bricolage mais fonctionne très bien c’a change la vie pour enlever la batterie sans retirer l'optique.

      Un coupe de Bombe peut être envisager en fonction de la couleur de votre AK.
      Avis d'opinion: 0
    • - 28.02.2026 A écrit:
      Più che soddisfatto, il pezzo si cambia in 4-5 minuti e si adatta perfettamente ad un cyma platinum CM.055 permettendo di montare un dot avendo accesso diretto al vano batteria
      Avis d'opinion: 0
    • - 30.08.2025 A écrit:
      Works fine on CYMA AKs74u (CM035).
      I've replaced the OEM pin with an M3 screw.
      No wobbling even with a heavier optics.
      Pro for me is the iron sight replacement, not so accurate, you get too much free space between the front and the rear sight, but on CQB it's fair.
      Avis d'opinion: 0
    • - 28.07.2025 A écrit:
      Fits WE AKS-74U , but is a bit too wide. Get a vice and press it together.

      Does come with a pin out of rolled metal, for fitting into trunion. Screws on the inner side of the dust cover might need tightening to eliminate RIS rail wobble.
      Avis d'opinion: 1
    • - 22.06.2025 A écrit:
      A must upgrade for the aks 74, the original broke so the replacement was an upgrade, fitted a red dot on it and it works perfectly. comes with hardware and it is a quick easy replacement. very good quality!
      Avis d'opinion: 0
    • - 06.03.2025 A écrit:
      Very useful product if You are an AK user, It's long enough to receive 3-9x scope. I'm perfectly satisfied with it. Perfect price-value ratio. The package contains the axle too, very easy to install it.
      Avis d'opinion: 1
    • - 18.12.2024 A écrit:
      A must have for any AKS-74U setup, as it is far more practical in my experience compared to a side rail, as you can access the battery space without needing to remove any parts. I highly suggest getting the shop to install the rail, as without the proper tooling i ended up scratching up my pin location. The installation is worth the money, compared to the headache and time wasted doing it yourself (which i did with a hammer and screwdrivers). Looks great, feels secure. A must-buy.
      Avis d'opinion: 0
    • - 30.10.2024 A écrit:
      One of the best rails for the top of an ak, fit snug but is still able to fold up.

      Different sized roll pins however so don't lose the one with the packaging.

      If you're looking for a lot of rail space this isnt the best, you can only fit 1 red dot or sight on it, no magnifiers or holo combos unfortunately
      Avis d'opinion: 0
    • - 13.02.2024 A écrit:
      Tökéletesen illeszkedik a modellre (CM.045a)
      mindenféle gond nélkül telepíthető ami kb 10 percet vessz igénybe. Személy szerint örültem volna ha ugyan olyan irányzékot kap mint az eredeti de ez is megfelel.
      Avis d'opinion: 0
    • - 12.12.2023 A écrit:
      Ak74 acessório top cover em alumínio/metal que encaixa perfeitamente em ak74u da Jing Gong com ebb. Material leve e de boa qualidade de construção que permite colocação de acessórios e miras tornando a arma mais tática. Bom upgrade para quem gosta de personalizar as réplicas
      Avis d'opinion: 0
    • - 28.09.2023 A écrit:
      It's totally fit on my Cyma 0.45, and it's working perfectly. It was not too hard to fit on my rifle, and it's look awsome now on my AK 74U. The material is strong, it's very good in quality! I will suggest this product everyone who want a nice sight/scope on his AK rifle. Easy to change it, good material, fit perfectly! Totally worth to buy it!
      Avis d'opinion: 0
    • - 22.07.2023 A écrit:
      Bought this for my cm.045A, and it fits great! It was a bit difficult to get on at first if you’ve never done it before, but it holds great! The material is very nice. I recommend getting this instead of a side mount, due to the fact that
      1. You have to take the side mount off every time to change the battery
      And
      2. The stock will not be able to fold with a side mount.
      My optic fits great on it as well! (Victoptics rds)
      Avis d'opinion: 0
    • - 03.07.2023 A écrit:
      Perfect on cm.045. Enough easy to mount. The bolt is longer that the one of replica but works perfect

      Very fast the spedition. In less a week I had the package

      It's quite too much 200 chars for a piece review. Maybe 100 were enough.

      Avis d'opinion: 0
    • - 31.03.2023 A écrit:
      Fits my CYMA CM.045 very well. It has a slight gap at the front, but that might be an advantage if you plan to put wire through it for other gear and setup. Affordable price too. You need a hammer and a punch to punch out the pin. Fittin the pin back might needs some force due to the spring pressure of the upper handguard retainer.
      Avis d'opinion: 0
    • - 08.03.2023 A écrit:
      Fits the cm.045a snuggly. A friend tried it on his and it fits too, we aren't sure of the moddel but it isn't a cyma, so it may be compatible with a lot of ak's.
      It does make it slightly less convenient to change a battery while having a scope mounted, but it doesn't inconvenience you in the least while out in the field.
      A side mount can be usually be installed on ak's and fitted perfectly by screwing it on, and this is meant to replace it. It doesn't really wobble, although my red dot is pretty small and light. Any wobble can be ultimately eliminated by putting in small cuts of paper.
      Also, it's made of the same material as the original cover, it seems to be some sort of aluminium. Whatever it is, it's solid enough for airsoft.
      Pretty great product.
      Avis d'opinion: 1
    • - 03.03.2023 A écrit:
      Rail came in fast. When unpacking I was positively surprised of the finish and robust construction. Mounting took aproximately 5 minutes. After closing it tbere was absolutely no wobble of any kind!!
      Real good buy, especially when playing CQB. This rail allows you to play stock folded.
      Avis d'opinion: 1
    • - 31.01.2023 A écrit:
      Good quality dust cover, sturdy and solid.
      Includes a rear sight block pin.
      Does require slight modification, if you want to fit it to your E&L AKS74U:
      You will have to slightly adjust the angle of the recess on your dust cover to be able to put your fire selector in safe position. Metal file or a dremel tool works fine for that.
      Also the original e&l rear sight pin will not fit anymore as it is too short. Using the included pin works fine however.
      The rear sight is shorter than the original, so you will be able to mount optics a few centimeters further up the dust cover for a longer eye relief.
      Avis d'opinion: 2
    • - 22.12.2022 A écrit:
      The first time i held it, i was suprised how heavy it was, it's really high quality, and it fits perfectly on my cyma ak74u, and it also fits my e&l ak74u.
      Excelent product, can't reccomend highly enough if you are building a tactical ak74u.
      Avis d'opinion: 1
    • - 28.11.2022 A écrit:
      the aks I have is a a cm045-UN; there's a small gap at the junction and the pin needs to be squeezed with pliers to fit the ring. other than that, stable and sturdy.
      and looks really well on the replica
      Avis d'opinion: 1
    • - 04.06.2022 A écrit:
      Really good quality and much better looking than most optic mounts for AKS74U replicas.
      Big must have if you dont like the dovetail mounts.

      + Material feels nice and firm

      + still very light

      + more battery space

      Really no Cons!
      Avis d'opinion: 1
    • - 29.05.2022 A écrit:
      Nice part, perfect fit and great quality. Fits my cyma 74u with no issues.
      No wobble, I have no worries about putting my vortex 3x spitfire optic on it or any other optic for that matter. Really solid build and great addition.
      Avis d'opinion: 1
    • - 11.05.2022 A écrit:
      Does what it is supposed to do.
      It fits my CYMA CM045A perfectly, doesn't wobble at all.
      it is however a bit more heavy, especially with an optic, so that the dust cover doesn't spring op as easily.
      that isn't really a problem though, just a tiny little bit anoying when changing batteries.
      Avis d'opinion: 0
    • - 11.04.2022 A écrit:
      Fantastic item, I customized my WE Ak74UN a lot and many parts had to be filed or modified etc. This was one of the few bits that worked great out of the box, a bit of hammering in the rod and that's it, mounted, I thouroughly recommend this cover. It also looks great with the matte black finish.
      Avis d'opinion: 3
    • - 05.04.2022 A écrit:
      Works great. Bought it to swap the stock one on the 045C, so I could fold the stock and have an optic at the same time (side mount would get in the way). Installation was easy, hammer the old pin out (it comes with a new one), swap the dust cover making sure you reinstall the pin and spring which holds the top gas tube cover, finally hammer the new pin in.
      Avis d'opinion: 2
    Ajouter un avis

Accessoires pour répliques airsoft - meilleure ergonomie et fonctionnalité — Vérifiez les autres produits de la série



Permet le montage d'optiques sur les répliques CM.045, CM.045A, CM.045C, JG1011, BY-012, BY-001A, ASK205A.
Convient a la plupart des fusils compactes AEG AKS-74U, mais peut nécessiter des modifications supplémentaires. Si vous avez des questions, veuillez écrire a : [email protected].


Consignes de sécurité et d'utilisation

Ce produit répond à toutes les exigences réglementaires. Assemblage professionnel requis. Commandez le service d'assemblage chez Taiwangun ou consultez les ressources ci-dessous. Attention: contient de petites pièces, ne convient pas aux enfants de moins de 14 ans.
SKU: FBP4153 · EAN: 5901698418380 · Rail couvre culasse AKS-74U [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport