[Ensemble] BY-001A - BLACK [Double Bell] + PBS-1 MINI SPITFIRE Traceur [5KU]

Si vous êtes russophile vous allez être comblé par cette réplique à prix sympathique !
Rapport qualité prix presque imbattable

Alors, en soit l’AK est très belle, il y a un peu de jeu dans la crosse une fois déplier, et dans le garde main supérieure mais rien de grave.
Quand elle tire, elle le fait bien, elle est assez précise et puissant. Elle a du punch !

Mais j’ai eux des problèmes, les billes, des les premiers tires, se bloquait dans le canon. Tawangun m’ont proposer de mettre de l’huile de silicone sur le joint du Hop-up pour le lubrifier, donc quand je le fait ça marche, je peux tirer correctement, mais le problème c’est que je doit le faire avant presque chaque partie sinon les billes recommence à ce coincer. Ce qui est pas vraiment normale de devoir le lubrifier aussi fréquemment.
Le ressort qui sert à retenir le couvre culasse et la pièce qui le bloque avait tendance à me sauter aux visage lorsque que j’ouvrais la partie supérieur de la réplique, car le ressort ne restait pas à ça place, j’ai pue réparer cela simplement avec un peu de scotch.
Le sélecteur de tire a aussi tendance à descendre trop bas

Si on passe tout ça je pense que c’est vraiment une belle réplique, avec des belle finissions, (c’est ma première réplique), et à ce pris là, on pouvait pas vraiment s’attendre à mieux. Quand on achète à bas prix, il faut être prêt à rencontrer ce genre de problème.

Attention : Le chargeur Cima ne s’adapte pas correctement avec l’AK74U double bell, malgres le faite que Tawangun affirme que si, il ne s’emboite pas.

Un pignon de la réplique a eux des dents qui se sont décroché au bout de 6 chargeur, nul blocage complet de la réplique, contact du sav taiwan gun nul il font tourner en rond pour ne pas récupérer la réplique

Pour le prix vous avez une gearbox avec un système de changement rapide de ressort
Un garde main en bois
Une réplique entièrement en métal
Une bonne base pour un custom ou un gros upgrade
Nettement moins chère que cyma

Réplique très réaliste, les finitions sont belle et c'est du véritable bois.

J'ai pu rencontrées un peux de jeux dans la crosse une fois déplier. Et je cherche comment résoudre le problème, je ne pense pas que sa soit sur toute les répliques mais un soucie a la soudure de la pièce.

J'ai acheter la réplique pour faire un custom, du coup un très bon premier prix pour faire un interne custom. Je vous conseil la réplique pour débuté ou bien faire un custom personnel de celle ci.

Nous pouvons adapter une mount QD sur la réplique car elle dispose de la plaque sur le coter de la réplique qui peux l'accueillir.

Bonne achat

Le minimum requis

Rapport qualité-prix incroyable
Puissance en FPS comme prévu

Très léger jeu dans le garde main inférieur mais rien de grave.

At first i was heasetend whether i should buy this gun. But i took a chance and bought it anyway. Great choice. Good build quality. Real steel and wood. Has a good weight to it and shoot real hard and accurately. Definitely recommend

This thing is amazing. Super sturdy construction, very bright illumination of bb's, looks amazing on my E&L AKS-74U. But what i like the most is it comes with a inner barrel extender that really helped with stabilizing accuracy and bb trajectory, prevents wall strikes, and comes with (i don't know why most of the companies don't do this) 24mm cw thread and 14mm ccw thread insert so it fits whatever you want, that is cool. All in all works good, looks good, feels amazing and has actual impact on replica performance, recommend

Honestly my favourite airsoft gun so for and my first from tiwangun the double bell BY-001A or rather the aks-74u it's a realy good
Replica of the gun haven't got to use it yet in
A game looking forward to it tho. All in all a great starter gun if you want a nice piece of history. Anyway thats all stay cheeky brikei

Bought it for a friend
Nice budget ak, good for starters
It packs a punch
It feels good on hand on par with cyma
The wood is better quality than i expected
I might grab one for myself in the next sale since i want a classic lookin ak-u

Beatifull replica, full metal and wood grips. I have this replica for 3 years now. and bought it on sale for 95 euros. And it has been extremely reliable. I only changed the bucking, for a maple leaf one. the replica still works great since the day it came out of the box.

I bought this tracer unit for my E&L AKS. The quality of the material is really solid, looking both good and being very sturdy. The tracer unit is easy to take out the shell to charge too. Would recommend this if you're looking for an AK replica tracer

I honestly thought this tracer unit would be a LOT smaller but I guess it meets the "1:1 replica model" size well so I cannot complain. It probably could fit an entire XT301 MK2 tracer unit inside of it.

The actual tracer unit portion is tiny, which is held in place at the very end of the PBS-1 by utilizing a clever design to keep it there. It is easy to disassemble to recharge too.

The only con I would say is it is quite heavy because of its solid metal construction. You will not break it by dropping or hitting it against a wall that is for certain. And you will be getting stronger just lifting a replica with this attached to it. All in all, glad I bought this tracer unit. I would say it adds an extra wow factor to any replica, if you so choose to use it on a non-AK platform like I did.

I think for this price this is a very good replica!
For a 145 euros (when i bought it) you get a very nice ak, with no wobbly parts, and a decent FPS. I wouldn't recomended it as a starter gun, beacuse it dosen't come with cleaning rod and any nice quality box. But this is why it's only a 145 euros, and still a good replica. In my opinion its better then the cyma version, becouse of the price. One thing I would recomend is to buy a better hopup, couse the one it comes is not the best, and you not going to be that accured, but it's not that important. And maybe a sling couse the gun can get a bit heavy after holding it for a while, but pay attencion to that not every AK sling is good for it, beacuse in the front it has a very little hole for a sling. I had two games with it and it preformed without problems.
Overall this is a very solid, good preforming replica, and I recommend buying it.

The replica is very solid, no wobbly parts. With the 390 fps it shoots around 400 with a decent battery. At the triggerguard the internals are exposed, but its not seenable only, if you look from a specific angle. The replica is not the heavyest , but I would reccomend to buy a sling, cuz you might have ro hold it for hours. This is my first full metal + wood replica, and for this price its a I'm very happy with it. Fornmenthis is my second replica, and its really grate for that.

The product is made of very highly quality metal. It is very heavy and bigger than I expected but the material quality is very good. The reason for 4 stars is because the locking mechanism kinda pushes the tip of the tracer to the side and it’s hard to align it with the barrel. I bended the lock and now it lines up good. The functionality is 10/10. Very easy to use.

Very tight, no rattle at all.
I only changed the magazine with a steel one.
I had a little problem with stock locking position easy solved.
Overall a good aquisition.
Sadly I didn't knew that battery is coming without charger. Now I need to buy a charger from somewhere else.

Solid feel with full metal and real wood construction AKS-47UN for very affordable price. I shoots brilliantly considering replicas barrel length and price. In my replica there is absolutely no wobble in the folding stock nor anywhere else. It takes all of my Cyma and Arcturus magazines but does not take LCT drum magazine.

Only negatives are about assembly quality (in my example): as front of the gun is slightly misaligned iron sights are fully useless, stock is slightly misaligned and does not naturally lock in the folded position (it can however be manually locked) and selector required disassembly and reassembly for it to feel right.

I do recommend this replica, however it might require some work and a optic on a sight rail to become fully effective in the field.

Purpose of purchase: Short tracer for AT-PP19-1-ME
Sturdy looking tracer. Easy to disassemble and clean if needed. Easy to charge with ledlight for indication.
Be careful when assembling, tighten everything or it might come lose during use.
Looks very good on small AK-like replicas.

Steel receiver, real wood foregrip. The rear sight base and the latching mechanism (both open and closed) and the hinge of the stock are made of pot metal. A little wobble on the stock.

Internally good parts, motor does well with the stock spring (~400 fps with .2 bbs). Ventilated aluminium piston head with full steel teeth piston. 8 mm ball bearings seem to be the weak point, I tried to replace them with the cross-pattern steel bushings, but they are too high, so the gearbox could not be closed properly. I only replaced the stock nozzle with an O-ring one and the cut off lever with a steel one. I can't review the factory hop up bucking, as I replaced it with a Maple Leaf Monster.

Additionally, the transparent hopup chamber makes it easy to upgrade with a tracer unit keeping the replica short without the use of a tracer silencer.

Nice weight, good build quality. Only reason for not being a 5/5 iis due to the lack of a flash hider retainer pin support. This means you have to tighten it carefully, because over tightening will result in either the CW thread or the CCW thread of the adapter to loosen up again.

Perfect for the price. The main parts are made of iron, the workmanship of the wooden parts is good, it is well put together, it does not wobble or rattle. It's a solid, durable piece, it won't hurt if you drop it. Perfect for Cqb.

Shoots fairly accurate, looks and feels amazing with the real steel and wood housing. I mounted a rails to be able to mount a sight and it looks great now. Still the old school feeling with the wood really completes the look and feel

Great product. Nice flash and trace lighting. Easy to disassemble (needed for charging). Very important, universal type charging using USB-C. Very sturdy construction (full metal body and inner 'barrel' with spring to hold the flash unit). Has an adapter for both threads.
And best of all, looks awesome on an AK.

They are certainly a lot nicer than they used to be back in the days of DBOYS. Still not quite CYMA level, but they are cheaper than CYMA for the equivalent gun, a few little tweaks and they are potentially cracking pieces of kit. The build seemed very stable and solid enough that I would have been hard pressed to tell the difference between Double Bell and CYMA.