[Ensemble] BY-001A - BLACK [Double Bell] + Chargeur Mid-Cap Polymere 85 billes pour AK [Double Bell]

Si vous êtes russophile vous allez être comblé par cette réplique à prix sympathique !
Rapport qualité prix presque imbattable

chargeur mid cap compatible avec LCT ,E&L, cyma ,jing gong, SRC , classic army et APS . un petit peu de jeu lateral en fin un bon mid cap copurt pour pouvoir jouer et tiere en position allongé .
je le recommende 100/100

Chargeur AK Mid-cap court en POLYMERE (25/06/24) :

Caractéristiques :
Coque en polymère, et non en acier ! (il y a une erreur dans le titre).
Aspect un peu fragile, néanmoins pas de jeu entre les constituants de la coque externe.
Hauteur 13 cm (comptez 12 cm une fois le chargeur engagé). Largeur : 10 cm (en position de jeu, en comptant la patte d'appui postérieure)
Lèvre antérieure de 3x18 mm.

Cache inférieur de 35x67 mm pour l'accès à la coque interne, nécessite une clé alène n°2.
Coque interne pas tout à fait étanche, on peut apercevoir le ressort au niveau de la jonction des 2 cosses.

Test effectué ce jour avec le bloc Hop up Begadi pour AK Cyma (CM077) avec 1 chargeur :
Résultat parfait, pas de blocage, pas de bourrage de billes.
Chargeur vide : pas de bruit. Chargeur plein : léger cliquetis des billes mais acceptable.

Au total : bon produit, mauvaise surprise quant au titre. Voire la durabilité sur le terrain.

Alors, en soit l’AK est très belle, il y a un peu de jeu dans la crosse une fois déplier, et dans le garde main supérieure mais rien de grave.
Quand elle tire, elle le fait bien, elle est assez précise et puissant. Elle a du punch !

Mais j’ai eux des problèmes, les billes, des les premiers tires, se bloquait dans le canon. Tawangun m’ont proposer de mettre de l’huile de silicone sur le joint du Hop-up pour le lubrifier, donc quand je le fait ça marche, je peux tirer correctement, mais le problème c’est que je doit le faire avant presque chaque partie sinon les billes recommence à ce coincer. Ce qui est pas vraiment normale de devoir le lubrifier aussi fréquemment.
Le ressort qui sert à retenir le couvre culasse et la pièce qui le bloque avait tendance à me sauter aux visage lorsque que j’ouvrais la partie supérieur de la réplique, car le ressort ne restait pas à ça place, j’ai pue réparer cela simplement avec un peu de scotch.
Le sélecteur de tire a aussi tendance à descendre trop bas

Si on passe tout ça je pense que c’est vraiment une belle réplique, avec des belle finissions, (c’est ma première réplique), et à ce pris là, on pouvait pas vraiment s’attendre à mieux. Quand on achète à bas prix, il faut être prêt à rencontrer ce genre de problème.

Attention : Le chargeur Cima ne s’adapte pas correctement avec l’AK74U double bell, malgres le faite que Tawangun affirme que si, il ne s’emboite pas.

Un pignon de la réplique a eux des dents qui se sont décroché au bout de 6 chargeur, nul blocage complet de la réplique, contact du sav taiwan gun nul il font tourner en rond pour ne pas récupérer la réplique

Pour le prix vous avez une gearbox avec un système de changement rapide de ressort
Un garde main en bois
Une réplique entièrement en métal
Une bonne base pour un custom ou un gros upgrade
Nettement moins chère que cyma

Réplique très réaliste, les finitions sont belle et c'est du véritable bois.

J'ai pu rencontrées un peux de jeux dans la crosse une fois déplier. Et je cherche comment résoudre le problème, je ne pense pas que sa soit sur toute les répliques mais un soucie a la soudure de la pièce.

J'ai acheter la réplique pour faire un custom, du coup un très bon premier prix pour faire un interne custom. Je vous conseil la réplique pour débuté ou bien faire un custom personnel de celle ci.

Nous pouvons adapter une mount QD sur la réplique car elle dispose de la plaque sur le coter de la réplique qui peux l'accueillir.

Bonne achat

Le minimum requis

Rapport qualité-prix incroyable
Puissance en FPS comme prévu

Très léger jeu dans le garde main inférieur mais rien de grave.

At first i was heasetend whether i should buy this gun. But i took a chance and bought it anyway. Great choice. Good build quality. Real steel and wood. Has a good weight to it and shoot real hard and accurately. Definitely recommend

The Polymer Short Mid-Cap Magazine (85 BBs) for AK by Double Bell is a practical and affordable option for airsoft players looking for a compact, realistic magazine. With its 85-round capacity, it strikes a good balance between realism and usability, especially for milsim or tactical gameplay where high-cap magazines feel less authentic.

The durable polymer construction keeps the weight reasonable while still offering solid resistance to impacts and wear. Its short design is a major advantage, making it easier to shoot from prone positions and improving overall weapon handling in tight environments.

Feeding performance is generally reliable, with most users reporting smooth operation across various AK replicas. However, minor issues can occur, such as occasional difficulty inserting the magazine or a few BBs not feeding at the end.

Overall, it’s a cost-effective, compact, and functional mid-cap magazine—ideal for players who prioritize maneuverability and realism over maximum capacity.

The Polymer Short Mid-Cap Magazine (85 BBs) for AK by Double Bell is a practical and affordable option for airsoft players looking for a compact, realistic magazine. With its 85-round capacity, it strikes a good balance between realism and usability, especially for milsim or tactical gameplay where high-cap magazines feel less authentic.

The durable polymer construction keeps the weight reasonable while still offering solid resistance to impacts and wear. Its short design is a major advantage, making it easier to shoot from prone positions and improving overall weapon handling in tight environments.

Feeding performance is generally reliable, with most users reporting smooth operation across various AK replicas. However, minor issues can occur, such as occasional difficulty inserting the magazine or a few BBs not feeding at the end.

Overall, it’s a cost-effective, compact, and functional mid-cap magazine—ideal for players who prioritize maneuverability and realism over maximum capacity.

E un buon prodotto compatto e portatile, pesca tutti i pallini, compatibile per ak47-ak74-rpk. Plastica molto buona innesto perfetto e facile.
Il colore è ottimo e resistente a urti e sfregamenti.
La capacità di 85bb in uno spazio così piccolo rende la replica molto più maneggevole durante le giocate.si smonta facilmente anche per essere pulito o fare manutenzione.
Grazie

these short mags are a little bit clumsy to insert sometimes, but other than that, they are feeding my e&l platinum ak105 very well. i really love them. also these mags are very nice for prone shooting.

Honestly my favourite airsoft gun so for and my first from tiwangun the double bell BY-001A or rather the aks-74u it's a realy good
Replica of the gun haven't got to use it yet in
A game looking forward to it tho. All in all a great starter gun if you want a nice piece of history. Anyway thats all stay cheeky brikei

Works on my CYMA ak just fine, except it doesn't shoot the last 5 bbs, with most replicas it's the last 3 or 4 bbs, but they're good enough for their price. Also SCAV AK, CHEEKI BREEKI IV DAMKE

Bought it for a friend
Nice budget ak, good for starters
It packs a punch
It feels good on hand on par with cyma
The wood is better quality than i expected
I might grab one for myself in the next sale since i want a classic lookin ak-u

Beatifull replica, full metal and wood grips. I have this replica for 3 years now. and bought it on sale for 95 euros. And it has been extremely reliable. I only changed the bucking, for a maple leaf one. the replica still works great since the day it came out of the box.

I think for this price this is a very good replica!
For a 145 euros (when i bought it) you get a very nice ak, with no wobbly parts, and a decent FPS. I wouldn't recomended it as a starter gun, beacuse it dosen't come with cleaning rod and any nice quality box. But this is why it's only a 145 euros, and still a good replica. In my opinion its better then the cyma version, becouse of the price. One thing I would recomend is to buy a better hopup, couse the one it comes is not the best, and you not going to be that accured, but it's not that important. And maybe a sling couse the gun can get a bit heavy after holding it for a while, but pay attencion to that not every AK sling is good for it, beacuse in the front it has a very little hole for a sling. I had two games with it and it preformed without problems.
Overall this is a very solid, good preforming replica, and I recommend buying it.

The replica is very solid, no wobbly parts. With the 390 fps it shoots around 400 with a decent battery. At the triggerguard the internals are exposed, but its not seenable only, if you look from a specific angle. The replica is not the heavyest , but I would reccomend to buy a sling, cuz you might have ro hold it for hours. This is my first full metal + wood replica, and for this price its a I'm very happy with it. Fornmenthis is my second replica, and its really grate for that.

Fits perfect my E&L AK74M Essential. Does wobble in the cyma AK74U. Overall a short magazine always comes in handy! easy to lay down and fire from a pront position! Highly recommend! All tho it fits perfect for E&L replica, i did need some small filing in order for it to fit the magwell.

Very tight, no rattle at all.
I only changed the magazine with a steel one.
I had a little problem with stock locking position easy solved.
Overall a good aquisition.
Sadly I didn't knew that battery is coming without charger. Now I need to buy a charger from somewhere else.

Solid feel with full metal and real wood construction AKS-47UN for very affordable price. I shoots brilliantly considering replicas barrel length and price. In my replica there is absolutely no wobble in the folding stock nor anywhere else. It takes all of my Cyma and Arcturus magazines but does not take LCT drum magazine.

Only negatives are about assembly quality (in my example): as front of the gun is slightly misaligned iron sights are fully useless, stock is slightly misaligned and does not naturally lock in the folded position (it can however be manually locked) and selector required disassembly and reassembly for it to feel right.

I do recommend this replica, however it might require some work and a optic on a sight rail to become fully effective in the field.

Steel receiver, real wood foregrip. The rear sight base and the latching mechanism (both open and closed) and the hinge of the stock are made of pot metal. A little wobble on the stock.

Internally good parts, motor does well with the stock spring (~400 fps with .2 bbs). Ventilated aluminium piston head with full steel teeth piston. 8 mm ball bearings seem to be the weak point, I tried to replace them with the cross-pattern steel bushings, but they are too high, so the gearbox could not be closed properly. I only replaced the stock nozzle with an O-ring one and the cut off lever with a steel one. I can't review the factory hop up bucking, as I replaced it with a Maple Leaf Monster.

Additionally, the transparent hopup chamber makes it easy to upgrade with a tracer unit keeping the replica short without the use of a tracer silencer.

Perfect for the price. The main parts are made of iron, the workmanship of the wooden parts is good, it is well put together, it does not wobble or rattle. It's a solid, durable piece, it won't hurt if you drop it. Perfect for Cqb.

Shoots fairly accurate, looks and feels amazing with the real steel and wood housing. I mounted a rails to be able to mount a sight and it looks great now. Still the old school feeling with the wood really completes the look and feel

They are certainly a lot nicer than they used to be back in the days of DBOYS. Still not quite CYMA level, but they are cheaper than CYMA for the equivalent gun, a few little tweaks and they are potentially cracking pieces of kit. The build seemed very stable and solid enough that I would have been hard pressed to tell the difference between Double Bell and CYMA.