CM.009E MOSFET EDITION [CYMA]
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
-
Formes de livraison
Entrer le Pays et le code postale, afin de voir les couts de livraisons.
-
Spécifications techniques
Poids 2520 g Couleur black Matière aluminium, polymere Mode de tir auto, semi Modele chargeur hi-cap Matiere chargeur acier Batterie inclue OUI Type conneteur batterie T-connerctor Version gearbox v.2 Type roulement acier lisse Diametre roulement 8 mm Periode garantie 12 mois Hop up reglable Type filetage canon ani-horaire EAN 5901698493738 Ammo .23g, .25g Longueur 730 mm Capacité chargeur 320 BBs Longeur canon interne 265 mm Energie sortie projectile 1.41 J Vitesse initiale 390 FPS avec billes de 0.20g Diamètre filetage canon mm 14 Diamètre canon interne 6.03 mm Modele de réplique Répliques Airsoft AR15 / M4 / M16 ETU MOSFET TAK Fabricants: CYMA Code: FB4058 -
Opinions
Ajouter un avis-
-
21.06.2023
A écrit:
Il s'agit de ma 5e réplique cyma avec leur mosfet maison.
Je ne suis jamais déçu. Interne qui tourne assez bien d'origine (tout est étanche), le mosfet fonctionne très bien. Simple mais efficace.
J'ai été surpris de découvrir une chambre hop up rotative (contrairement au précédent où c'était "l'ancien modèle de chambre hop up".)
Le corp a d'ailleurs changé un peu, il est désormais plus "gris", du plus bel effet pour une réplique d'arme "rétro".
Le changement de ressort est vraiment aisé.
Bref, je recommande. La seule upgrade en vue, ce sera un changement de moteur par un moteur avec plus de couple. -
-
16.07.2020
A écrit:
Sono stato molto soddisfatto dell'acquisto . E' la prima replica in commercio dell'XM177 versione E1. Ottimo rapporto qualità prezzo, lo attendevo da un pò di tempo e non me lo sono fatto certo scappare!!.Aprezzabile e realistica la piacevole colorazione grigia del receiver molto simile al modello Marui XM177E2 ( che possiedo dal 1995 ) e del relativo caricatore ( grigio e non il solito nero).Avantages:cosa non da poco è dotato di ETU di serie!Inconvénients:
ha la possibilità di sostituire rapidamente la molla per variarne la potenza.
Inserire la batteria nel paramano è abbastanza agevole
L'estetica è corretta rispetto al modello reale ( a parte le dimensioni del paramano leggermente più abbondanti per ragioni di batterie)A differenza della versione venduta in Asia è privo dei loghi Colt, ma nella vita non si può avere tutto inoltre in Giappone il prezzo è decisamente molto ma molto più salato!! Quindi per mè va bene anche così. -
-
13.07.2020
A écrit:
XM177 E1Avantages:
Sono molto soddisfatto dell'acquisto, veramente un bella replica !!! Grazie
Introvabile replica dell XM 177 E1, realizzata con cura, cavetteria interna argentata, connettore T-Deans con adattatore Small Tamiya incluso!Inconvénients:
Open bolt funzionante, caricatore in metallo dalla finitura che appaga l'occhio, azzeccata anche la colorazione del receiver di un color grigio più che soddisfacente (superiore all'xm177 E2 della Classic Army che possiedo). L'ho messo a confronto col mio XM177 E2 Marui (in plastica) del 1995 e non sfigura per nulla anzi!! (Tra l'altro è anche full metal).
L'unico rammarico la mancanza dei loghi Colt (presenti sulla versione Cyma commercializzata in Asia), però diciamocela tutta per il prezzo che ha non si può pretendere la luna!!! ( pagato un buon 50% in meno rispetto a quanto sborsai nel 1995 per l’acquisto del Marui senza hop-up : £.750.000 corrispondenti a € 325,00 odierni) -
-
26.10.2024
A écrit:
I have this one for a Vietnam loadout, but I also use it in "normal" game play. It is an outstanding weapon, it shoots like a laser with outstanding range and accuracy for a carbine style gun. Its compact and indexes well, I'd like to to get the "proper" XM177 handguard but its hardly a deal breaker, I note this replica is now available on TG for 126 euro, that is a steal for such a fabulous piece. Buy it now!! I said NOW!!
-
-
12.12.2023
A écrit:
I'm really impressed by the build quality of this gun.
Cyma has really improved a lot and is now one of the few brands that offers decent out of the box parts and performance, I recommend it to everyone -
-
18.05.2023
A écrit:
I bought this gun to make it look like a BD Car-15, and I am not disappointed. The externals are fairly decent but the internals are really nice for a 200$ AEG. High torque motor with standard gears, mosfet and a full metal rack piston. The hopup is a rotary style and works very well, it also comes with an upgraded hop up rubber out of the box so the range and accuracy is excellent for such a short barrel.
-
-
15.12.2022
A écrit:
Outstanding Replica out of the box,
The mosfet integrated and the good motor give the replica a really pleasant rate of fire, even in semi mode, wich is the the standard Mod play in FRANCE. Then the Quick spring change gearbox without dismounting everything is awesome.
I am completely satisfied with this product, externally and internal, cyma became a BIG brand with affordable price. Thanks to taiwan gun team who offer the power downgrade ;) nothing to do for me :) -
-
23.06.2022
A écrit:
The gun shoots well, I’ve had no issues with feeding and I’m happy with the accuracy and fps that I get. The one problem I have with it is that it comes with the fatter M4 front grips rather than the historically accurate thin XM177 grips, in order to fit a large battery underneath them. This doesn’t matter so much if you’re not going for a historical kit, but if you are, you can replace them pretty easily with accurate grips. However, it can be a bit difficult to find a battery that will be able to fit underneath the new smaller grips. The gun also comes with no engraving marks on the side, which is good if you plan to engrave historically accurate markings on it.
-
-
09.03.2021
A écrit:
very nice made gun, it feels solid no wobbeling. The features are right on spot (exept for de hanguard, this is a little bigger than the original, but allows the 9.6V 1200 mAh battery to fit, otherwise you will have to use a lipo for those are smaller) The spring is very easy to change and even when its shooting 340 fps (0.30) the range is very good about 40 mtr. A must have for Nam style.Avantages:good looks, feelsgood, not expensive, shoots good, spring change, is lightweight and is a classicInconvénients:foreward handguard is bigger than original.
-
-
03.02.2021
A écrit:
very nice, solid construction
-
-
21.06.2023
A écrit:
Cyma AR15 Série Old School — Vérifiez les autres produits de la série
Réplique de la nouvelle série M16 de fusils d'assaut, créée grâce au résultat d'une longue coopération et d'une confiance mutuelle entre les entreprises qui ont une expérience significative dans ce domaine - CYMA et TAIWANGUN.COM. Ces carabines sont produites dans différentes spécifications, notamment civiles ou militaires. Le lower inférieur, le upper supérieur, le canon externe, le sélecteur de tir, le bouton de déverrouillage du chargeur, la gâchette, le tube de crosse, la poignée de chargement et les viseurs avant et arriere sont en aluminium, ce qui a rendu la réplique plus réaliste. Chaque modele a sur le lower un numéro de série unique.
Caracterisques:
Consultez notre offre.
Spring set for gearbox M4/V2 [CYMA], V2/V3 SILENT CYLINDER HEAD, EXTRA SEAL [CYMA]
Si vous ne trouvez pas la piece dont vous avez besoin, veuillez contacter notre service apres-vente.
Chaque réplique passe une vérification initiale. Les mesures sont effectuer sur un chronographe XCORTECH X3200.
Caracterisques:
- Canon extérieur en métal léger, avec un canon de précision de 6,03 mm
- Garde-mains en polymere
- Upper supérieur plat A1 en métal
- Lower inférieur en métal
- Crosse fixe polymere pour batteries de grande capacité
- Poignée pistolet en polymere
- Set de visée fixe
- Chargeur d'acier
- cache flamme factice avec un filetage de 14 mm CCW
- Gearbox V2 avec systeme de changement rapide du ressort
- Unité electronique avec systeme MOSFET intégré
- Jeu d'engrenages en acier avec rouelement en acier de 8 mm
- Guide de ressort sur roulement a billes
- Moteur high torque avec aimants neodymes
- Piston avec dent en acier
- Ensemble silencieux (tete de piston sur roulement, tete de cylindre a double étanchéité)
- Cylindre en acier inoxydable de type 1
- Ce modele est équipé d'une chambre hop-up rotative. Désormais, le réglage du systeme hop-up est tres facile et précis
- Replique M16
- Chargeru 320 billes
- Batterie 9.6V 1200 mAh
- un chargeur de batterie
- Adaptateur tamiya/deans
Consultez notre offre.
Spring set for gearbox M4/V2 [CYMA], V2/V3 SILENT CYLINDER HEAD, EXTRA SEAL [CYMA]
Si vous ne trouvez pas la piece dont vous avez besoin, veuillez contacter notre service apres-vente.
Chaque réplique passe une vérification initiale. Les mesures sont effectuer sur un chronographe XCORTECH X3200.
Consignes de sécurité et d'utilisation
Veuillez lire les informations suivantes pour une utilisation sûre du produit :SKU: FB4058 · EAN: 5901698493738 · CM.009E MOSFET EDITION [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant 

Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · shop@taiwangun.com
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · shop@taiwangun.com
Fabricants:
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques
Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via shop@taiwangun.com
* Prix avec la TVA, sans les couts de transport
