CM.009E MOSFET EDITION [CYMA]
Artikel nicht verfügbar
Benachrichtige über die Verfügbarkeit des Artikels
-
Lieferformen
Geben Sie Land und Postleitzahl ein, um die Versandkosten anzuzeigen
-
Technische Daten
Gewicht 2520 g Farbe schwarz Material aluminium, polymer Feuer Art auto, semi Magazinart hi-cap Magazin Material stahl Akku im Set JA Akku Stecker Art T-connerctor Gearboxa Art v.2 Lager Art stahlschieber Lager Durchmesser 8 mm Garantiezeit 12 Monate Hop up einstellbar Gewinde Art linkshändig EAN 5901698493738 Munition ,23g, .25g Länge mm 730 Kapazität des Magazins 320 BB Innenlauflänge mm 265 Energie der Projektilmündung 1.41 J Mündungsgeschwindigkeit 390 FPS mit 0,20g BBs Laufgewindedurchmesser mm 14 Innerer Laufdurchmesser mm 6.03 Replica Model Softair AR15 / M4 / M16 ETU MOSFET TAK Hersteller: CYMA Code: FB4058 -
Meinungen
Meinung hinzufügen-
-
16.07.2020
schrieb:
Sono stato molto soddisfatto dell'acquisto . E' la prima replica in commercio dell'XM177 versione E1. Ottimo rapporto qualità prezzo, lo attendevo da un pò di tempo e non me lo sono fatto certo scappare!!.Aprezzabile e realistica la piacevole colorazione grigia del receiver molto simile al modello Marui XM177E2 ( che possiedo dal 1995 ) e del relativo caricatore ( grigio e non il solito nero).Vorteile:cosa non da poco è dotato di ETU di serie!Mängel:
ha la possibilità di sostituire rapidamente la molla per variarne la potenza.
Inserire la batteria nel paramano è abbastanza agevole
L'estetica è corretta rispetto al modello reale ( a parte le dimensioni del paramano leggermente più abbondanti per ragioni di batterie)A differenza della versione venduta in Asia è privo dei loghi Colt, ma nella vita non si può avere tutto inoltre in Giappone il prezzo è decisamente molto ma molto più salato!! Quindi per mè va bene anche così. -
-
13.07.2020
schrieb:
XM177 E1Vorteile:
Sono molto soddisfatto dell'acquisto, veramente un bella replica !!! Grazie
Introvabile replica dell XM 177 E1, realizzata con cura, cavetteria interna argentata, connettore T-Deans con adattatore Small Tamiya incluso!Mängel:
Open bolt funzionante, caricatore in metallo dalla finitura che appaga l'occhio, azzeccata anche la colorazione del receiver di un color grigio più che soddisfacente (superiore all'xm177 E2 della Classic Army che possiedo). L'ho messo a confronto col mio XM177 E2 Marui (in plastica) del 1995 e non sfigura per nulla anzi!! (Tra l'altro è anche full metal).
L'unico rammarico la mancanza dei loghi Colt (presenti sulla versione Cyma commercializzata in Asia), però diciamocela tutta per il prezzo che ha non si può pretendere la luna!!! ( pagato un buon 50% in meno rispetto a quanto sborsai nel 1995 per l’acquisto del Marui senza hop-up : £.750.000 corrispondenti a € 325,00 odierni) -
-
26.10.2024
schrieb:
I have this one for a Vietnam loadout, but I also use it in "normal" game play. It is an outstanding weapon, it shoots like a laser with outstanding range and accuracy for a carbine style gun. Its compact and indexes well, I'd like to to get the "proper" XM177 handguard but its hardly a deal breaker, I note this replica is now available on TG for 126 euro, that is a steal for such a fabulous piece. Buy it now!! I said NOW!!
-
-
12.12.2023
schrieb:
I'm really impressed by the build quality of this gun.
Cyma has really improved a lot and is now one of the few brands that offers decent out of the box parts and performance, I recommend it to everyone -
-
18.05.2023
schrieb:
I bought this gun to make it look like a BD Car-15, and I am not disappointed. The externals are fairly decent but the internals are really nice for a 200$ AEG. High torque motor with standard gears, mosfet and a full metal rack piston. The hopup is a rotary style and works very well, it also comes with an upgraded hop up rubber out of the box so the range and accuracy is excellent for such a short barrel.
-
-
15.12.2022
schrieb:
Outstanding Replica out of the box,
The mosfet integrated and the good motor give the replica a really pleasant rate of fire, even in semi mode, wich is the the standard Mod play in FRANCE. Then the Quick spring change gearbox without dismounting everything is awesome.
I am completely satisfied with this product, externally and internal, cyma became a BIG brand with affordable price. Thanks to taiwan gun team who offer the power downgrade ;) nothing to do for me :) -
-
23.06.2022
schrieb:
The gun shoots well, I’ve had no issues with feeding and I’m happy with the accuracy and fps that I get. The one problem I have with it is that it comes with the fatter M4 front grips rather than the historically accurate thin XM177 grips, in order to fit a large battery underneath them. This doesn’t matter so much if you’re not going for a historical kit, but if you are, you can replace them pretty easily with accurate grips. However, it can be a bit difficult to find a battery that will be able to fit underneath the new smaller grips. The gun also comes with no engraving marks on the side, which is good if you plan to engrave historically accurate markings on it.
-
-
09.03.2021
schrieb:
very nice made gun, it feels solid no wobbeling. The features are right on spot (exept for de hanguard, this is a little bigger than the original, but allows the 9.6V 1200 mAh battery to fit, otherwise you will have to use a lipo for those are smaller) The spring is very easy to change and even when its shooting 340 fps (0.30) the range is very good about 40 mtr. A must have for Nam style.Vorteile:good looks, feelsgood, not expensive, shoots good, spring change, is lightweight and is a classicMängel:foreward handguard is bigger than original.
-
-
03.02.2021
schrieb:
very nice, solid construction
-
-
16.07.2020
schrieb:
Cyma AR15 Old School Serie — Entdecken Sie auch die anderen Produkte dieser Serie.
Replica of the new classics series of M16 rifles, created as the results of a long cooperation and mutual trust between companies which have significant experience in this domain - CYMA and TAIWANGUN.COM. These carabines are produced in different specification that includes civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger, the charging handle, and the front and rear sight are made in aluminum, that made the replica is more realistic. Each model has on the lower receiver a unique serial number.
Specification:
Check our offer.
Spring set for gearbox M4/V2 [CYMA], V2/V3 SILENT CYLINDER HEAD, EXTRA SEAL [CYMA]
If you do not find the part you need, please contact our service department.
Specification:
- light metal outer barrel, with a precision 6.03mm inner barrel
- polymer handguard for large capacity batteries
- metal A1 flat top upper receiver
- metal lower receiver
- polymer collapsible stock
- polymer pistol grip
- fixed sight set
- steel magazine
- dummy flash suppressor with a 14mm thread CCW
- V2 gearbox with quick spring change system
- processor unit with built-in MOSFET system
- full steel teeth polycarbonate piston
- steel gear set with 8mm steel bushings
- CNC machined aluminum silent cylinder and piston head set (ball bearing piston head, double o-ring cylinder head)
- ball bearing spring guide
- high torque neodymium motor
- type 1 stainless steel cylinder
- this model is equipped with a Rotary hop-up chamber. Now the adjustment of the hop-up system is very easy and precise
- compact M16 replica
- 320rd magazine
- 9.6V 1200 mAh battery
- charger
- tamiya/deans connector adapter
Check our offer.
Spring set for gearbox M4/V2 [CYMA], V2/V3 SILENT CYLINDER HEAD, EXTRA SEAL [CYMA]
If you do not find the part you need, please contact our service department.
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
Sicherheits- und Verwendungsrichtlinien
Bitte lesen Sie die folgenden Informationen für eine sichere Verwendung des Produkts:SKU: FB4058 · EAN: 5901698493738 · CM.009E MOSFET EDITION [CYMA] ·
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Verantwortliche Person und Hersteller 

Für das Inverkehrbringen des Produkts in der EU verantwortliche Person:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · shop@taiwangun.com
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · shop@taiwangun.com
Hersteller:
REPLIKAS, DIE AUF TAIWANGUN.COM VERFÜGBAR SIND, DÜRFEN NUR VON VOLLJÄHRIGEN GEKAUFT WERDEN. SIE SIND NUR FÜR ASG- UND TAKTISCHE SPIELE BESTIMMT
Fragen? Wir helfen Ihnen gerne weiter. Senden Sie uns eine E-Mail an shop@taiwangun.com
* Die Preise enthalten die gesetzliche Mehrwertsteuer ohne Versandkosten
