Réplique Mitrailleuse MG42 Full Metal AEG - Real Wood [AGM]

Je rêvais de cette replique depuis longtemps et je l'ai enfin ! Mais il y a quelques détails qui posent problème : le hop-up n'est pas assez serré et se dérègle tout seul avec le temps, il y a du jeu dans la crosse, la sécurité est difficile à enclencher mais s'enlève d'une simple caresse du doigt et l'interne de la gearbox est en plastique ce qui n'est pas génial pour une réplique de soutien qui tire uniquement en automatique ...

Superbe réplique qui avec un peu de travail pour lui donner une patine fait fureur ( sans jeu de mots ) ! Seul point négatif serait pour moi l’absence de marquage mais avec un peu d adresse on peut y remédier

Une réplique vraiment impressionnante dès l’ouverture du carton. La taille imposante et le poids conséquent donnent immédiatement une sensation de réalisme bluffante. On sent qu’on a entre les mains une pièce sérieuse, stable et bien équilibrée une fois en position. Ce gabarit renforce clairement l’immersion, que ce soit en partie ou en exposition.
La cadence de tir est tout simplement impressionnante, avec une rafale rapide et nerveuse qui rappelle parfaitement l’esprit de la MG42. C’est un vrai plaisir en jeu pour du rôle de soutien.

Le montage est simple et rapide, sans difficulté particulière, ce qui permet de la mettre en service rapidement même sans être expert. La crosse en bois est de très bonne qualité, avec une belle finition et un rendu authentique qui ajoute énormément au charme de l’ensemble.
Enfin, le conditionnement est soigné et efficace : la réplique est parfaitement protégée dans son emballage, ce qui évite toute mauvaise surprise à la réception. Une pièce massive, performante et esthétiquement réussie.

réplique sympa malgré le manque de troue a l'avant de la cage du Cannon ce qui peut rendre pas très réaliste, la couleur du bois est pas bonne non plus, sinon pour le reste c'est top surtout pour 600e la sécurité par contre est a revoir car trop sensible ou parfois ne fonctionne simplement pas. elle est tout de même incroyable au tir et en décoration / exposition lors de reconstitution (changer la couleur de la cross !) la boite toujours aussi stylé type grosse caisse métallique (en carton) le bipied très facile a monter ainsi que le drum, des originaux passe sans problème idem pour des bande de munition ( a quelques bricoles prêt)

Great gun, looks good, but requires a some or a lot oft tnkering. Mine might have just been faulty, but the tapped plate broke shortly after first usage of the gun. I believe it is made for 8.4v batteries. So if you plan to use it with an 11.1V i reccomend also replacing the magazine battery with a stronger one so the bb's feed properly. After a bit of tinkering this guy is a beast and gets a lot of attention.

I’m not into Airsoft (yet) but I wanted to have a MG42 in my collection that is affordable. At 1/20 if the price of a real one this is the best alternative! Very well made repro … only the bolt etc is not there due the airsoft mechanics. From the outside it looks very real! Even the Zweibein/bipod is a well-done replica! Only a pity the Airsoft battery and Air-target crosshair is not included …

Réplica muy buena ,se la ve robusta,acabados muy buenos,por mucho que diga la gente de externo es idéntica a la g&g ,se le echa en falta el cargador y la batería que no la trae,la réplica se tiene que montar ,mostrar especialmente cuidado con la culata ,por qué la puedes meter mal la primera vez y cuesta sacarla luego

Definitely the most eye catching piece of kit you could have on the field it really stands out and feels like a beast in the hands not for running and gunning it really is a support gun through and through with it's size and weight great for holding down and area or defending and objective build quality is superb with it all being made out of metal and the stock out of wood so it's sturdy my only issue is the stock has a very small bit of wobble nothing major only because that's where the battery is stored so you'll be twisting it on and off quiet abit apart from that this is the cheapest you'll find an MG42 on the Airsoft market the only other one is the G&G brand but that is way more expensive so if you're looking for an affordable/fun replica of the MG42 this is where you'll get it without breaking the bank.

The replica was in very nice condition,well made with nice touches and a realistic feature.i have purchased another guns too from Taiwangun and I'm very pleased with these and with the customer service.

The replica was in very nice condition,well made with nice touches and a realistic feature.i have purchased another guns too from Taiwangun and I'm very pleased with these and with the customer service.

An expencive but fun replica!
This replica is very realistic/good for displaying and playing. It's also a great "fidget" machine; it has a lot of things to open/unscrew/flip/slide....
Construction: The main parts are made out of some metal (not steel). I also handled a older version of this one and there were no major breakages; some parts were worn (where you attach the bipod for example). The replica comes partly disassembled; if something doesn't want to go together, don't use force. Wiggle the parts or try reattaching - otherwise you'll break something. When I attached the side charging handle, it was very loose - I don't know if that's correct. Bipod looks sterdy, but don't be too ruff with it ; the attachment point is made out of pot metal.
The battery compartment is a bit small: the longest battery you can stick inside is about 160mm and about 30mm in diameter (24mm x34mm does not fit inside the tubular stock compartment).
The performance was good; about 1,2J with 0,32bbs and hop set. ROF was also high (about 1000 rpm). The hop-up is hard to adjust: you have to open the top cover and remove the feed tray to wreach the hop lever. The stock inner barrel is about 600mm long and the hop is simmular to AK design. Metal hop chamber has a lot of room inside for the hop-up rubber - use some teflon tape.
The gearbox: it's two part design. The lower has the motor inside the pistol grip and it holds the gears. They were greased very little and shimming isn't great, but it sounds good. Upper gearbox is very thick and it looks that it could handle stronger springs. It also has a QC spring system (very simmular to M60/M249). The nozzle is plastic and 29,4mm long, cylinder head is long type (like in the M60). Piston head and piston are both fully plastic. It has a 0 type (full) cylinder and air seal was exelent (without the air nozzle). Inside there was an M110 spring.
The drumm mag is a peace of work. Full of catches, levers and doors. It holds about 1500 bbs, but it doesn't feed all of them. It is powered by 4 AA batteries (I think) and it winds when you hold down the trigger. I don't think it has a clutch system. On the older replica I had to fix the magazine; the spinning feed tray, that pushes the bbs into the flexible channel was stripped - it was spinning freely on the motor axel). However, so far I had no problems with the magazine.

At last, there is an affordable MG42 that can deliver suppressive fire as it is supposed to be. Do not expect a similar quality as the G&G version, but this AGM can keep up nevertheless. As with any AEG replica, sooner or later, you will have to focus on upgrading and maintenance to get the best out of your gun. Still, out of the box, this AGM MG42 does an impressive job.
The stock may wobble a bit (not the wooden stock itself, but the metal attachment that goes into the rear of the rifle). This can be easily fixed with some tape. The real wooden stock brings an authentic touch to it all.
The mag requires four 1.5V batteries for the servo-motor that shovels the BBs out of the mag and pushes them into the flexible hose towards the "breech" from the top. Attaching the mag does not take long, once you get used to the procedure: fill the mag with batteries and 2500 BBs, position it onto the front hook while guiding the BB-hose towards the BB-entrance hole. While closing the rear hook, gently push the BB-hose into the hole until it snugly fits. Then, connect the wires between the mag and the gearbox, so that the mag-servo will be activated, once you pull the trigger. It's simple and intuitive, once you have done it a few times.
Reloading BBs during a skirm does not require detaching the mag. You can slide it open at the top, just enough as to allow for a refill with the help of a funnel, or out of a bottle, if you practice that procedure a bit before the battle. Then, close the sliding lid and your mag is full again.
I have tested mine with one of my usual 11.1V lipo batteries. The rate of fire is amazing, although I did not measure it yet. The mag needs some time to push the first charge of BBs into the "breech", so that my first impression was disbelief: why does it not shoot any BBs? After a few seconds, they came out of the muzzle. Hundreds of them, in a few seconds. And straight. Very nice grouping, although that criterium was not on the top of my list, when I considered buying this MG42.
You may want to do some maintenance and perhaps upgrading on this gun, as with any other. The gearbox can be detached from the receiver with a few actions, it's not complicated. Exchanging the spring is really simple, due to the quick detachment design.
Before I'll take this MG42 to the field, I want to inspect the interns and estimate as to what may need some attention. It shoots well, but I want to ensure that it stays like that.
You will definitely bring some fire power to the field when you get yourself this gun. Bring a lot more BBs with you though, you are going to spend them quite fast, while keeping those heads low over there!

Guy is awesome and unique. Material is fine its good quality but not top tier. Easy to asemble. I had issue with little "door" on mag. It was blocked and slided a few time from place that was holding it. Its an easy fix. Great gun for some casual player or cosplayer. Im using 11.1v battery and its shooting really fast.