+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

Crosse pour MP5 [CYMA]

Promotion
CYMA  FBP4006 | Disponible
Notre prix*: $9.67

Dernier prix avant la promotion: $13.81

Changer Livraison gratuite à partir de 250 € ou à partir de 9,50 € pour la livraison par Mondial Relay Tout sur le livraison : France

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: CYMA
    Code: FBP4006
    EAN 5901698487010
    Poids 370 g
    Couleur noire
    Matière polymere
    Longueur 280 mm

  • Opinions

    • - 13.04.2026 A écrit:
      Parfait, cette crosse de bonne qualité se fixe sans difficulté sur mon mp5 cyma à la place de la crosse rétractable d'origine.

      Merci à Taiwangun pour la vitesse de livraison et la qualité de l'emballage.
      Avis d'opinion: 0
    • - 19.03.2026 A écrit:
      I installed it on a Cyma Mp5 :
      Fits well, it's solid and doesnt wobble.
      The texture is rough and grippy so it doesnt slip when wet.
      It also comes with the little metallic pin so if you lost the original one this can replace it.
      Avis d'opinion: 0
    • - 01.09.2025 A écrit:
      Envoi rapide, très bien emballé, conforme, la qualité est bonne, aucun problème d'installation, avoir différentes couleurs serait top.
      Merci pour la livraison rapide.
      Donc site de confiance, beaucoup de choses à acheter, prix très correct.
      Avis d'opinion: 0
    • - 24.07.2026 A écrit:
      Perfect fit for my CYMA CM041 G. As much as I liked the retractable stock it was too havy. This option is much litier and plenty of space in the stock.
      As downsides, the link for attaching slings is very limiting, most fast hooks did not fit there...
      Also, buttstock is on sliding pins, downwords for opening, and it seems that can be easy losted, but, will see.
      Avis d'opinion: 0
    • - 03.06.2026 A écrit:
      Solid construction, looks nice and has plenty of internal storage for a battery, as well as a loop for mounting a sling
      I bought mine for my JG MP5k, and they do not fit MP5ks unfortunately, I'll be keeping mine around in case I pick up a full sized MP5 at some point
      Avis d'opinion: 0
      Odpowiedź sklepu:
      If you have any questions about compatibility, please contact our customer service first.
    • - 16.03.2026 A écrit:
      Perfectly fits my cyma cm041j, it has a lot of space for your battery, the material is nice to the touch and everything has a nice build. It doesn't wiggle when mounted on.
      It may not be collapsible like the stock variant but I prefer it
      Avis d'opinion: 0
    • - 29.09.2025 A écrit:
      Fit on my CYMA easily, great large battery space. I had a G&G solid stock on my gun previously which required several layers of tape to not wobble. I can only assume this would be a tight fit on a G&G.
      Avis d'opinion: 0
    • - 18.08.2025 A écrit:
      A must have if you like mp5s I got it in a CM041j and is really nice to use it with a silencer or suppressor specially if it is a tracer unit.

      The try slug system is working too. So you have the screw and try slug options to adapt suppressors and other barrel accesories.

      But you can't use it in cyma mp5k (CM041k)



      Avis d'opinion: 0
    • - 18.08.2025 A écrit:
      Very solid for it's price.

      Easy to install into CM041j, really good looking and its empty so is a good choice if you need to do some modifications on your replica, or just as storage.

      Is not valid for CM041k if you don't modify it with a drilling machine.. (what I've done)

      I'm happy with mine.
      Avis d'opinion: 0
    • - 28.09.2023 A écrit:
      Unfortunately it doesn't fit on a Tokyo Marui Mp5 ngrs as described. "Sling grip" is also too shallow to have a proper sling clip fit. The stock itself feels nice overall but unfortunately I cannot use it.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      We are very sorry that the stock does not fit your replica. This stock does not fit the NGRS models.
    • - 23.08.2023 A écrit:
      Really sturdy for a plastic stock. Unfortunately doesn't match the back end of my cyma mp5k (which I could've researched, so my bad) probably giving this to someone who needs a spare. The back plate even comes off easily for accessing the rear wired battery for example and has a ton of room even for bigger lipo's.
      Avis d'opinion: 1
    • - 03.03.2023 A écrit:
      Very easy to install, i've only remove 1 pin to disassembly the old stock, and 1 pin to put this new stock, on my asg. the pin is included in the package. I've buy it to change my foldable tube stock, m4 style. on my mp5 platinum version. It's so good the plastics materials seams strong. And the butt cover is in very nice rubber material, is easy to slide out to put the battery. There's also so much space for every kind of batteries. Nice work CYMA
      Avis d'opinion: 4
    • - 15.02.2023 A écrit:
      Surprisingly good quality, I was expecting a plastic stock and got a Fibrous Nylon one, that fit perfectly, pin to fix it was included, and the end pad can be removed for battery access.
      The sling attachment seems sturdy enough, no play and fine on my MP5 even though it's quite a light one.
      Avis d'opinion: 0
    • - 09.11.2022 A écrit:
      Very sturdy and nicely built. Has an awesome matt finish ans texture. Install is a snap, just remove the rear pin on your mp5 and swap the two over. Plenty of room to run a large battery or lipo inside. Works with jg model too.
      Avis d'opinion: 0
    • - 16.09.2022 A écrit:
      Fits perfectly on my Cyma CM041J, provides a ton of battery space and doesn't creak or feel cheap.
      In fact there is so much space I had to make a foam insert that keeps my 2200mAh battery from freely rattling everywhere.
      Avis d'opinion: 1
    • - 17.06.2022 A écrit:
      Solid stock, the sling mount thingy is kind of narrow and thin, so I use paracord on the slimmest part of the stock instead, just in case. I think its a great buy. Cant complain. No issues (blue edition cyma mp5)
      Avis d'opinion: 0
    • - 24.05.2022 A écrit:
      Fit perfectly on a CYMA CM041J. I like the collapsible stock, but this can hold a much larger battery.
      Avis d'opinion: 0
    • - 22.05.2022 A écrit:
      Super easy to install, all you need is included with the product. It's light and robust, feels sturdier than the sliding stock but almost exactly the same weight. It's a smidge shorter than the fully extended sliding stock but it's not a problem, length of pull is still as it should be.
      Avis d'opinion: 0
    • - 24.01.2022 A écrit:
      Fits perfectly snug on my Cyma mp5. Used to have the telescopic stock. Has no wiggle at all. Plenty of room for my battery and plug in mosfet now.
      Does make the gun a lot longer in transport though and does not have the authentic holes for the pins.
      Avis d'opinion: 0
    • - 11.01.2022 A écrit:
      Nice stock; the whole of it is made out of a very strong plastic. The butpad is very difficult to remove - which is good (it wont get lost while playing). But it has some side-to-side movement on the gun.
      Avis d'opinion: 0
    Ajouter un avis

  • Demander un produit

    L’administrateur de vos données personnelles est \ KRAKMAN P.Kiepura, K.Michalik Sp. k. ayant son siège à Cracovie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Les données à caractère personnel ne seront traitées que pour établir un contact avec vous et aux fins légalement justifiées du responsable du traitement. La communication de vos données personnelles est volontaire mais également nécessaire pour vous contacter. Vous trouverez des informations détaillées sur le traitement de vos données personnelles dans notre Politique de confidentialité sur les règles de traitement des données personnelles Les champs marqués d'un (*) sont obligatoires
Crosse fixe pour MP5, compatible avec les répliques TM.
Ne convient pas aux modeles MP5 NGRS.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: FBP4006 · EAN: 5901698487010 · Crosse pour MP5 [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport