+48 123626134 [email protected]
Sonderangebot
CYMA  FBP4006 | Verfügbar
Unserer Preis*: $9.67

Letzter Preis vor der Aktion: $13.81

  • Lieferformen

    Geben Sie Land und Postleitzahl ein, um die Versandkosten anzuzeigen

  • Technische Daten

    Hersteller: CYMA
    Code: FBP4006
    EAN 5901698487010
    Gewicht 370 g
    Farbe schwarz
    Material polymer
    Länge mm 280
  • Meinungen

    • - 27.11.2024 schrieb:
      Ich habe es für meine Mx5 von ICS gekauft, da der Schaft wirklich schlecht ist. Dieser hier von Cyma ist genau das Gegenteil es passt alles wunderbar, die Oberflächenstruktur fühlt sich viel wertiger an, es besteht keine Klebenaht oberhalb des Schaftes und verleiht der Waffe einen höheren Wert und das für den Preis!
      Bewertung bewerten: 0
    • - 24.07.2026 schrieb:
      Perfect fit for my CYMA CM041 G. As much as I liked the retractable stock it was too havy. This option is much litier and plenty of space in the stock.
      As downsides, the link for attaching slings is very limiting, most fast hooks did not fit there...
      Also, buttstock is on sliding pins, downwords for opening, and it seems that can be easy losted, but, will see.
      Bewertung bewerten: 0
    • - 03.06.2026 schrieb:
      Solid construction, looks nice and has plenty of internal storage for a battery, as well as a loop for mounting a sling
      I bought mine for my JG MP5k, and they do not fit MP5ks unfortunately, I'll be keeping mine around in case I pick up a full sized MP5 at some point
      Bewertung bewerten: 0
      Odpowiedź sklepu:
      If you have any questions about compatibility, please contact our customer service first.
    • - 16.03.2026 schrieb:
      Perfectly fits my cyma cm041j, it has a lot of space for your battery, the material is nice to the touch and everything has a nice build. It doesn't wiggle when mounted on.
      It may not be collapsible like the stock variant but I prefer it
      Bewertung bewerten: 0
    • - 29.09.2025 schrieb:
      Fit on my CYMA easily, great large battery space. I had a G&G solid stock on my gun previously which required several layers of tape to not wobble. I can only assume this would be a tight fit on a G&G.
      Bewertung bewerten: 0
    • - 18.08.2025 schrieb:
      A must have if you like mp5s I got it in a CM041j and is really nice to use it with a silencer or suppressor specially if it is a tracer unit.

      The try slug system is working too. So you have the screw and try slug options to adapt suppressors and other barrel accesories.

      But you can't use it in cyma mp5k (CM041k)



      Bewertung bewerten: 0
    • - 18.08.2025 schrieb:
      Very solid for it's price.

      Easy to install into CM041j, really good looking and its empty so is a good choice if you need to do some modifications on your replica, or just as storage.

      Is not valid for CM041k if you don't modify it with a drilling machine.. (what I've done)

      I'm happy with mine.
      Bewertung bewerten: 0
    • - 28.09.2023 schrieb:
      Unfortunately it doesn't fit on a Tokyo Marui Mp5 ngrs as described. "Sling grip" is also too shallow to have a proper sling clip fit. The stock itself feels nice overall but unfortunately I cannot use it.
      Bewertung bewerten: 0
      Odpowiedź sklepu:
      We are very sorry that the stock does not fit your replica. This stock does not fit the NGRS models.
    • - 23.08.2023 schrieb:
      Really sturdy for a plastic stock. Unfortunately doesn't match the back end of my cyma mp5k (which I could've researched, so my bad) probably giving this to someone who needs a spare. The back plate even comes off easily for accessing the rear wired battery for example and has a ton of room even for bigger lipo's.
      Bewertung bewerten: 1
    • - 03.03.2023 schrieb:
      Very easy to install, i've only remove 1 pin to disassembly the old stock, and 1 pin to put this new stock, on my asg. the pin is included in the package. I've buy it to change my foldable tube stock, m4 style. on my mp5 platinum version. It's so good the plastics materials seams strong. And the butt cover is in very nice rubber material, is easy to slide out to put the battery. There's also so much space for every kind of batteries. Nice work CYMA
      Bewertung bewerten: 4
    • - 15.02.2023 schrieb:
      Surprisingly good quality, I was expecting a plastic stock and got a Fibrous Nylon one, that fit perfectly, pin to fix it was included, and the end pad can be removed for battery access.
      The sling attachment seems sturdy enough, no play and fine on my MP5 even though it's quite a light one.
      Bewertung bewerten: 0
    • - 09.11.2022 schrieb:
      Very sturdy and nicely built. Has an awesome matt finish ans texture. Install is a snap, just remove the rear pin on your mp5 and swap the two over. Plenty of room to run a large battery or lipo inside. Works with jg model too.
      Bewertung bewerten: 0
    • - 16.09.2022 schrieb:
      Fits perfectly on my Cyma CM041J, provides a ton of battery space and doesn't creak or feel cheap.
      In fact there is so much space I had to make a foam insert that keeps my 2200mAh battery from freely rattling everywhere.
      Bewertung bewerten: 1
    • - 17.06.2022 schrieb:
      Solid stock, the sling mount thingy is kind of narrow and thin, so I use paracord on the slimmest part of the stock instead, just in case. I think its a great buy. Cant complain. No issues (blue edition cyma mp5)
      Bewertung bewerten: 0
    • - 24.05.2022 schrieb:
      Fit perfectly on a CYMA CM041J. I like the collapsible stock, but this can hold a much larger battery.
      Bewertung bewerten: 0
    • - 22.05.2022 schrieb:
      Super easy to install, all you need is included with the product. It's light and robust, feels sturdier than the sliding stock but almost exactly the same weight. It's a smidge shorter than the fully extended sliding stock but it's not a problem, length of pull is still as it should be.
      Bewertung bewerten: 0
    • - 24.01.2022 schrieb:
      Fits perfectly snug on my Cyma mp5. Used to have the telescopic stock. Has no wiggle at all. Plenty of room for my battery and plug in mosfet now.
      Does make the gun a lot longer in transport though and does not have the authentic holes for the pins.
      Bewertung bewerten: 0
    • - 11.01.2022 schrieb:
      Nice stock; the whole of it is made out of a very strong plastic. The butpad is very difficult to remove - which is good (it wont get lost while playing). But it has some side-to-side movement on the gun.
      Bewertung bewerten: 0
    Meinung hinzufügen
  • Frage nach dem Artikel

    Der Administrator Ihrer persönlichen Daten ist "KRAKMAN" KG mit Sitz in Krakau, Półłanki Str. 18, 30-740 Krakau, Steueridentifikationsnummer: 6793082897, Gewerbeanmeldungsnummer: 122593008. Personenbezogene Daten werden nur zum Zwecke der Kontaktaufnahme mit Ihnen und zu rechtlich begründeten Zwecken des für die Verarbeitung Verantwortlichen verarbeitet. Die Angabe Ihrer persönlichen Daten ist freiwillig, aber auch erforderlich, um Sie zu kontaktieren. Detaillierte Informationen zur Verarbeitung Ihrer personenbezogenen Daten finden Sie in unseren Datenschutz-Bestimmungen zu den Grundsätzen der personenbezogenen Datenverarbeitung. Die mit (*) gekennzeichneten Felder sind Pflichtfelder
Stock for MP5 CYMA -and is compatible with TM.
Does not fit MP5 NGRS models.


Sicherheits- und Verwendungsrichtlinien

Bitte lesen Sie die folgenden Informationen für eine sichere Verwendung des Produkts:
SKU: FBP4006 · EAN: 5901698487010 · Stock for MP5 [CYMA] ·
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Verantwortliche Person und Hersteller
Für das Inverkehrbringen des Produkts in der EU verantwortliche Person:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · [email protected]
Hersteller:

REPLIKAS, DIE AUF TAIWANGUN.COM VERFÜGBAR SIND, DÜRFEN NUR VON VOLLJÄHRIGEN GEKAUFT WERDEN. SIE SIND NUR FÜR ASG- UND TAKTISCHE SPIELE BESTIMMT

Fragen? Wir helfen Ihnen gerne weiter. Senden Sie uns eine E-Mail an [email protected]
* Die Preise enthalten die gesetzliche Mehrwertsteuer ohne Versandkosten