V2 mosfet - front [CYMA]

Si queréis modificar el switch de serie de vuestras réplicas V2 estándar, e instalar un switch con MOSFET integrado, esta es una magnífica opción.
Placa V2 con mosfet simple integrado, te olvidas de tener obstáculos para poder colocar la batería, funciona bastante bien y es muy cómodo de instalar, bastante compatible con los gearbox V2.

Would love to give this a 5/5 but evey time I order these they only send me the rear wired version... out of the several I've ordered for my projects and builds Ive only gotten a proper front wired version once.

This item is the same as the mosfet/etu as build in mijn replica. Therefore it Fits fantastic and works as expected. I have desoldered the wires and used the existing wiring, because I needed a rear wired version.

A stock replacement mosfet for Cyma V2 gearboxes. The original in my rifle broke after 600 shots (micro switch for the trigger broke). This one fit right in the gearbox; all I had to do was change the wires to the rear of the gearbox (I took them from the original mosfet). Like I said; it uses a micro switch for the trigger, for semi-auto it uses an optical sensor that tracks the position of the cut-off lever. One interesting side-effect: my rifle now shoots 3 round bursts on semi position and full auto on full auto position. This myte be do to the cut-off lever (I took it out by mistake and I'm not sure if I reinstalled the original one). I hope this mosfet lasts longer than the stock one.