+48 123626134 [email protected]
Cambiar idioma a inglés Cambiar el idioma al polaco Cambiar idioma a francés Cambiar idioma a español Cambiar el idioma al alemán
RINCÓN DE PRENSA
iniciar sesión | Registro
0 0

[Set] Réplica AEG del rifle de francotirador SVD - Madera auténtica [A&K] + Visro tipo 4x24 PSO-1 para SVD / SVU [S&T]

El kit incluye los siguientes productos.:

Disponible
Nuestro precio*: $376.12

Elige tu potencia FPS:

Estándar

440

Media

380

+$1.00
Low

340

+$1.00
Cambia Envío gratis desde 250 € o desde 9,50 € para el envío con InPost Todo sobre el envío: España

  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Para ver los datos técnicos del producto incluido en el conjunto, haga clic en el nombre

    EAN 5904420009603
    Peso 3320 g
    Modelo de réplica Réplica de Airsoft SVD / SVU
    Color negro
    Material aluminium, madera, acero
    Tipo de cargador hi-cap
    Modo de fuego semi
    Material del cargador acero
    Batería incluida NO
    Tipo de conector T-connerctor
    Versión de gearbox dedicado
    Tipo de rodamiento rodamiento de bolas de acero
    Diámetro de rodamientos 8 mm
    Período de garantía 12 meses
    Hop up ajustable
    Munición .30g
    Número de serie SI
    Longitud 1220 mm
    Capacidad del cargador 300 BBs
    Longitud del cañón interno 590 mm
    Energía de salida 1.8 J
    Velocidad de salida 440 FPS con bolas de 0.20g
    Diámetro interno del cañón mm 6.03
    Ilość magazynków w zestawie szt 1
    EAN 4580420297175
    Peso 720 g
    Color negro
    Material aluminium, latón, acero
    Óptica vidrio
    Przyrząd celowniczy cruz
    Longitud 244 mm
    Aumento fijo x 4

  • Opiniones

    • - 08.07.2026 escribió:
      Clear reticle, works great with my we ace svd gbbr but a little too tight fitting.

      Pros:
      -clear reticle
      -eye cup sits well and not too loose
      -looks great

      Cons:
      -mount is VERY tight and required a slight filing down to actually get it to be able to be tightened properly
      illuminated reticle doesn’t really work well
      Valoración de opinión: 0
    • - 24.06.2026 escribió:
      Pros: Crisp view, illumination works flawlessly, scope is really stable on the cm057 svd, offset is bearable, construction is sturdy.

      Cons: elevation and windage turret does not function at all, probably the leaf spring inside is stuck or the gears are off. For airsoft its managable however for 120+ eur you would expect it to function.
      Valoración de opinión: 0
      Odpowiedź sklepu:
      Thank you for your feedback. We tried to help as best we could. If you have any issues, please let us know.
    • - 22.03.2026 escribió:
      Sziasztok az a&k dragunov jó dmr platformnak bizonyult számomra. Van néhány kisebb probléma is mint például a 0.28as az lehet túl könnyű és mondjuk egy 0.30-0.36 os sokkal jobb jobb lő táv érdekében.Az alap hop up gumi ami benne van lehetséges hogy korán megadja magát ezt ajánlom cserélni a hop up elnyomó gumival együtt, az elő agyat tartó kis fém pöcök ami tartja a akkumulátor tartó fedelet lehet ha nem nyomjuk vissza erősen az ki eshet.Ezek ellenére én meg vagyok elégedve nagyon a fegyverrel kezdő dmr platformnak kiváló merem ajánlani kezdőnek haladónak.
      Valoración de opinión: 1
    • - 02.03.2026 escribió:
      Jeg har lige købt en dragunov sniper m. Kikkertsigte.
      Kvaliteten af dragunoven er ikke rigtig god.
      Det minder om en billig udgave af de andre dragunov, som man kan købe andre steder.
      Jeg har købt et stort glas montre, til at udstille den i.
      Det kommer ikke til at ske, da dragunoven ikke er særlig godt lavet.
      Kikkertsigtet jeg købte til dragunoven er virkelig god og i en meget fin udgave.
      Men det er så ærgerligt med kvaliteten på dragunoven.
      Mvh Henry Olsen.

      Valoración de opinión: 0
      Odpowiedź sklepu:
      Vi beklager meget, at den kopi, du købte, ikke levede op til dine forventninger. Vi vil meget gerne høre, hvad du specifikt ikke kunne lide. Hvis du kunne sende en e-mail til mturecki [at] taiwangun.com, kan vi videresende dine kommentarer til producenten.

      Husk desuden, at du kan returnere et produkt, der ikke lever op til dine forventninger. Du kan finde alle nødvendige oplysninger her, desværre på engelsk: https://www.taiwangun.com/withdrawal-from-the-agreement.html
    • - 18.04.2025 escribió:
      Out of the box- replica would not feed, scope mount was too thick and I had to file it down so it could fit the PSO scope. Wobly wooden stock.

      Changed barrel and hop up rubber- missfeeds and 2 BB shot at once, but still managed to get some shots out.

      Stock broke- turns out screws tore thru the edge of the stock and that is why it could not be tightened down and in the end stock just fell off.
      I think I will not be buying A&K replicas with wooden parts...

      Replica all in all looks cool, however, the wood parts fell "hollow" and weak, and performance was plain bad, but that could be fixed with some cheap upgrades.

      I'll just glue it back and keep it as a wall decoration, nothing else.
      Valoración de opinión: 0
      Odpowiedź sklepu:
      We just want to answer the first sentence. If your replica doesn't work properly out of the box, the first thing you should do is contact the seller to make it work. And that should be done in the first place. Giving us a chance to repair you could possibly avoid all the next steps that we are simply not responsible for.
    • - 11.02.2025 escribió:
      The mounting lever is very poorly welded on and snapped off while trying to mount it to the replica.

      Also it does not fit on a Cyma Vintorez CM.099 replica. The ilumination bulb housing is too low and it hits the dust cover of the replica. But you can unscrew the ilumination bulb housing and get it to fit that way but you will loose the ilumination. Overall, expensive and poorly built.
      Valoración de opinión: 0
      Odpowiedź sklepu:
      In such cases please always contact our techs. We want you to get

      The aforementioned product is dedicated to replicas different than CM.099, it's no wonder it doesn't work.
    • - 02.01.2025 escribió:
      The zero wont be useful but you can still effectively use this optic beyond 30m.
      To fit on my cyma SVD was a nightmare, a lot of banging with a mallet. Feels solid though.
      Only the scope hood could be a little tighter because it rattles and goes out of position easily.
      Valoración de opinión: 0
    • - 14.07.2024 escribió:
      Aint much to say. It works. It fits well on both E&L and Cyma AK platforms, you just need to adjust the screw for the locking mechanism for the particular optics mount as the exact dimensions differ between manufacturers. Easily done.

      It came with two batteries.

      The scope is mounted off center so you need to either zero it straight ahead and remember you need to aim slightly to the left of your target, or zero it for a set distance and estimate wether the bb will fly left, right or center depending on how far from your distance the target is.
      Valoración de opinión: 2
    • - 23.05.2024 escribió:
      A beautiful gun, at a very good price, unfortunately the metal parts are a significant alloy cast and aluminum, apart from that you can only find steel.
      The workmanship is good, the components of the gas return casting are cast together, with other manufacturers these move separately, although their function is not there either.
      The gun itself is a clone of the old King Arms, it has a motor at the back, a quality cast gearbox, with quality parts, and a finely adjustable rotary hop-up chamber.
      The wood parts are visual porn!
      Valoración de opinión: 2
    • - 15.03.2024 escribió:
      Very impressive and beautiful gun. I wouldn't say that it is the very most high quality version of this rifle available, but it is a great gun for this price. Battery compartment is a little hard to access, but not too difficult. Very high FPS. Absolutely fantastic as a collector's item and very realistic looking.
      Valoración de opinión: 4
    • - 26.12.2022 escribió:
      This model of pso-1 is perfect for svd replicas, easy to install and use, the reticle is easy to see and the eye relief is perfect, the reticle iluminator is on point, the only downside is the windage dial, on my cyma svd the windage is set at maximum to the right and it still not in line with the bb trajectory.
      Valoración de opinión: 0
    • - 07.11.2022 escribió:
      Awesome scope! Has illumination which can be turned on by a small switch which looks very retro. Reticule looks fine and keeps focus.

      The box also looks very nice and is packed securely. Can also be used for storage if needed.

      The eyecup which comes with the product does not fit easily. The Rubber Optoc Cover Mod2 from this website fits alot better.

      BE WARNED, this does NOT fit your AK without modification. It will also scratch the dust cover of AK's because its made for SVDs. Heating up the brass/gold looking pin and prying it out makes sure it fits on your AK. The clamp also has to be adjusted before it fits, this is shown in the manual.

      All by all, a good product to make your SVD or AK platform look more retro and have a cool period correct optic.
      Valoración de opinión: 7
    Añadir una opinión

  • Preguntar por el producto

    El administrador de sus datos personales es \ KRAKMAN P.Kiepura , K.Michalik Sp. k. con su domicilio social en Cracovia, calle. Półłanki 18, 30-740 Cracovia, NIP/NIF : 6793082897, REGON: 122593008. Los datos personales se procesarán únicamente con el fin de contactarlo y con fines legalmente justificados del administrador de datos. Proporcionar sus datos personales es voluntario pero también necesario para contactarlo. Puede encontrar información detallada sobre el procesamiento de sus datos personales en nuestroPolítica de privacidad sobre los principios del procesamiento de datos personales. Campos marcados con (*) son obligatorios


Directrices de seguridad y uso

Lea la siguiente información para un uso seguro del producto:
SKU: · EAN: - · [Set] Réplica AEG del rifle de francotirador SVD - Madera auténtica [A&K] + Visro tipo 4x24 PSO-1 para SVD / SVU [S&T] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.