[Set] SVD Sniper Rifle AEG Replica - Real Wood [A&K] + 4x24 PSO-1 Type Scope for SVD/SVU [S&T]

Clear reticle, works great with my we ace svd gbbr but a little too tight fitting.

Pros:
-clear reticle
-eye cup sits well and not too loose
-looks great

Cons:
-mount is VERY tight and required a slight filing down to actually get it to be able to be tightened properly
illuminated reticle doesn’t really work well

Pros: Crisp view, illumination works flawlessly, scope is really stable on the cm057 svd, offset is bearable, construction is sturdy.

Cons: elevation and windage turret does not function at all, probably the leaf spring inside is stuck or the gears are off. For airsoft its managable however for 120+ eur you would expect it to function.

Sziasztok az a&k dragunov jó dmr platformnak bizonyult számomra. Van néhány kisebb probléma is mint például a 0.28as az lehet túl könnyű és mondjuk egy 0.30-0.36 os sokkal jobb jobb lő táv érdekében.Az alap hop up gumi ami benne van lehetséges hogy korán megadja magát ezt ajánlom cserélni a hop up elnyomó gumival együtt, az elő agyat tartó kis fém pöcök ami tartja a akkumulátor tartó fedelet lehet ha nem nyomjuk vissza erősen az ki eshet.Ezek ellenére én meg vagyok elégedve nagyon a fegyverrel kezdő dmr platformnak kiváló merem ajánlani kezdőnek haladónak.

Jeg har lige købt en dragunov sniper m. Kikkertsigte.
Kvaliteten af dragunoven er ikke rigtig god.
Det minder om en billig udgave af de andre dragunov, som man kan købe andre steder.
Jeg har købt et stort glas montre, til at udstille den i.
Det kommer ikke til at ske, da dragunoven ikke er særlig godt lavet.
Kikkertsigtet jeg købte til dragunoven er virkelig god og i en meget fin udgave.
Men det er så ærgerligt med kvaliteten på dragunoven.
Mvh Henry Olsen.

Out of the box- replica would not feed, scope mount was too thick and I had to file it down so it could fit the PSO scope. Wobly wooden stock.

Changed barrel and hop up rubber- missfeeds and 2 BB shot at once, but still managed to get some shots out.

Stock broke- turns out screws tore thru the edge of the stock and that is why it could not be tightened down and in the end stock just fell off.
I think I will not be buying A&K replicas with wooden parts...

Replica all in all looks cool, however, the wood parts fell "hollow" and weak, and performance was plain bad, but that could be fixed with some cheap upgrades.

I'll just glue it back and keep it as a wall decoration, nothing else.

The mounting lever is very poorly welded on and snapped off while trying to mount it to the replica.

Also it does not fit on a Cyma Vintorez CM.099 replica. The ilumination bulb housing is too low and it hits the dust cover of the replica. But you can unscrew the ilumination bulb housing and get it to fit that way but you will loose the ilumination. Overall, expensive and poorly built.

The zero wont be useful but you can still effectively use this optic beyond 30m.
To fit on my cyma SVD was a nightmare, a lot of banging with a mallet. Feels solid though.
Only the scope hood could be a little tighter because it rattles and goes out of position easily.

Aint much to say. It works. It fits well on both E&L and Cyma AK platforms, you just need to adjust the screw for the locking mechanism for the particular optics mount as the exact dimensions differ between manufacturers. Easily done.

It came with two batteries.

The scope is mounted off center so you need to either zero it straight ahead and remember you need to aim slightly to the left of your target, or zero it for a set distance and estimate wether the bb will fly left, right or center depending on how far from your distance the target is.

A beautiful gun, at a very good price, unfortunately the metal parts are a significant alloy cast and aluminum, apart from that you can only find steel.
The workmanship is good, the components of the gas return casting are cast together, with other manufacturers these move separately, although their function is not there either.
The gun itself is a clone of the old King Arms, it has a motor at the back, a quality cast gearbox, with quality parts, and a finely adjustable rotary hop-up chamber.
The wood parts are visual porn!

Very impressive and beautiful gun. I wouldn't say that it is the very most high quality version of this rifle available, but it is a great gun for this price. Battery compartment is a little hard to access, but not too difficult. Very high FPS. Absolutely fantastic as a collector's item and very realistic looking.

This model of pso-1 is perfect for svd replicas, easy to install and use, the reticle is easy to see and the eye relief is perfect, the reticle iluminator is on point, the only downside is the windage dial, on my cyma svd the windage is set at maximum to the right and it still not in line with the bb trajectory.

Awesome scope! Has illumination which can be turned on by a small switch which looks very retro. Reticule looks fine and keeps focus.

The box also looks very nice and is packed securely. Can also be used for storage if needed.

The eyecup which comes with the product does not fit easily. The Rubber Optoc Cover Mod2 from this website fits alot better.

BE WARNED, this does NOT fit your AK without modification. It will also scratch the dust cover of AK's because its made for SVDs. Heating up the brass/gold looking pin and prying it out makes sure it fits on your AK. The clamp also has to be adjusted before it fits, this is shown in the manual.

All by all, a good product to make your SVD or AK platform look more retro and have a cool period correct optic.