+48 123626134 [email protected]
J.G. WORKS  1101 | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: J.G. WORKS
    Code: 1101
    EAN 5901698406714
    Poids 4160 g
    Modele de réplique Répliques Airsoft RPK
    Couleur noire
    Matière aluminium, bois, acier
    Modele chargeur hi-cap
    Mode de tir auto, semi
    Matiere chargeur acier
    Batterie inclue NON
    Type conneteur batterie small Tamiya
    Version gearbox v.3
    Diametre roulement 7 mm
    Periode garantie 12 mois
    Blowback oui
    Ammo .25g, .28g
    Numero de serie OUI
    Longueur 1045 mm
    Capacité chargeur 380 BBs
    Longeur canon interne 510 mm
    Energie sortie projectile 1.27 J
    Vitesse initiale 370 FPS avec billes de 0.20g
    Diamètre canon interne 6.05 mm
  • Opinions

    • - 06.01.2024 A écrit:
      Elle est arrivée avec du jeu dans le canon externe la visée avant oscillait horizontalement de deux cm. Du jeu dans la crosse horrible, en tirant fortement dessus elle se serait brisée à coup sur. Le bois de la crosse et de la poignée est de piètre qualité, celui des gardes mains est bien mieux. La couleur des bois est par contre horrible. La portée d'origine est franchement pas terrible, normal le cylindre est troué valable pour un canon court, une hérésie pour son canon de 51cm... En revanche l'étanchéité (sans le nozzle) était parfaite. Tous ces défauts sont bien entendu remédiable. Attention le nozzle est de type ak long voire plus long encore. Le kit bore up shs ne convient donc pas.

      Le blow back est un régal très réalistz avec le son qui va avec.
      Dois je la recommander ? OUI si vous êtes bricoleur. Sinon passez votre chemin trop de défauts à corriger. Donc que 3 étoiles. Cependant pour ce prix un peu de temps, et un drum cela fait une super réplique de soutien pour pas très cher.
      Avis d'opinion: 0
    • - 15.03.2023 A écrit:
      Incroyablement surpris par cette réplique.
      La réplique est d'un point de vue esthétique très jolie, le métal rend bien. En revanche les parties en "bois" ne sont pas très solide et je remarque déjà que fissure qui sont en train de se former.
      Pour parler plus de l'interne on se retrouve avec une mitrailleuse avec une bonne cadence, une portée de 40m au dessus 0 précision. Il faudra donc sûrement changer le canon, le joint et sûrement le ressort de la gearbox pour donner plus de "peps" à la réplique.
      Donc de base la réplique est correct pour un rôle de soutient, l'EBB rajoute une touche vraiment cool.
      Je recommande d'acheter un chargeur tambour (les swiss arms sont compatibles).
      En clair même si il y a quelques modifications à faire la RPK est une belle réplique qui fait son taff surtout pour ce prix
      Avis d'opinion: 0
    • - 11.10.2022 A écrit:
      great replica, sadly the wood parts moving a little
      the replica itself represent greatly the original weapon.
      the mag gived with the replica is to small for the replica and can easely fall over during rush or running
      Avis d'opinion: 0
    • - 07.07.2022 A écrit:
      Pour le moment aucun problème, la seul chose que j’ai du faire en la recevant et d’agrandir l’espace dans la crosse pour mettre la batterie. Mais sinon a voir en partie. Sinon ce qui est écris correspond a ce qu’on reçois. Bien pour débuter de recevoir une batterie et chargeur de batterie quand ont débute l’airsoft
      Avis d'opinion: 1
    • - 20.02.2023 A écrit:
      Great budget friendly LMG, good for trying out supporting.
      Pros:
      kinda light
      Electric blowback is awesome and nicely done
      decent hopup and firing range
      real wood/steel in nice price
      battleaxe steel midcaps fit extremely tight
      Cons:
      large stock does not equal big battery space
      ebb turns off hopup, but can be easily fixed
      not every mags fit, you have to try
      Avis d'opinion: 1
    • - 11.07.2022 A écrit:
      This is the absolute best budget-friendly LMG you’re going to get on the market right now.

      Before buying a JG1101, my experience with the manufacturer, JG Works, has been mixed at best. I used to own a T3-K3 (G3), which was outright disappointing, so I’ll have to admit I was a bit cautious before buying this replica.

      The JG1101 RPK (and this whole new, JG EBB AK-series) has been however, a very pleasant surprise so far.

      For starters, you’re not going to get many properly working LMG replicas around a 220 euro price tag, definitely not ones made of wood+metal, with a working electric blowback system. The metal parts of the replica are solid steel, while the wood itself is very smoothly made. The EBB system is not something I knew I was missing, but it really enhances the realistic feel of an airsoft gun, especially a machine gun. Everyone loves hearing that classic „ra-ta-ta-ta” sound when letting off a few bursts with an LMG, seeing the bolt slide back as it fires really ups the experience a notch. Also, it has a foldable bipod attached, which you can fold and unfold according to your static defense needs.

      The internals are surprisingly good as well. Obviously, it’s not a sniper rifle, but running the gun on full factory settings, you can use it for a fire support role on a solid 40 meters. Obviously, changing the hopup helps, but it runs quite well out-of-the-box, without any enhancements. What you need to pay attention is that there is an „L” shaped plastic piece below the dust cover that sometimes falls out, reinforcing its side with a 2x1 centimeter duct tape piece however, easily solves this problem. Also, the gun runs with a V3 gearbox, which is easy to do maintenance on and should be familiar to every airsoft mechanic in the world.

      The gun is not very picky when it comes to magazine compatibility. In addition to JG, it takes CYMA mags (which is a good news, because their RPK mags are more common on the market), and DMag (Arcturus), E&L mags as well. Sometimes, you might need to slap the lower part of the mag after you put it in, in order to prevent mags from accidentally falling out. CYMA RPK mags might sometimes do that.

      Always carry a screwdriver for this replica. The stock houses the batteries and the rear part of the casing is fitted with screws, so you can’t just flip it off, like in the case of some other AK replicas. Also, there is a hole drilled inside the wooden stock, where only stick batteries fit, so unlike ie. CYMA CM031 replicas, you’re not going to be able to fit large, brick-shaped batteries into your RPK. If you have any batteries for AKS-74U replicas to be used under the dust cover, they should fit for this JG RPK replica as well.

      Last, but not least: this gun is big, and it is also heavy. It is almost as heavy as a real RPK LMG - weighing around 4-4,2 kilograms - take that into account if you're deciding to go with it for a longer game. It is not suited for a CQB game, where everyone is running around with 1,5-2 kilogram replicas, it is however, perfectly suited for longer milsim games, where you have to provide fire support or establish static defenses. Even with midcap mags, this gun can spray a lot of hell.

      Tl;dr version: this is the best LMG on the market when it comes to price / value ratio right now. Works well out of the box, not picky when it comes to mags, solid, well-made, the EBB function makes it realistic.

      Absolute 10/10 buy. Having played a few matches with the JG1101, I decided to buy another JG EBB AK, a JG1010 AKS-74 replica, soon afterwards. After past disappointments, this new, JG AK series really changed my overall opinion about the manufacturer. I simply love these new AKs.


      Also, I made a short gameplay video with the JG1101 earlier, if you’re looking for actual in-game footage, this might be helpful for you as well: https://youtu.be/3NvT3AAoXRo
      Avis d'opinion: 37
    Ajouter un avis

Explorez la diversité des répliques: Oubliez AK et M4 — Vérifiez les autres produits de la série

Une réplique de la mitrailleuse russe utilisée depuis les années 1960 dans tous les conflits armés majeurs, tels que la guerre du Vietnam, la guerre en Irak et en Afghanistan, l'opération Tempete du désert, les guerres yougoslaves ou la guerre civile syrienne. La crosse, la poignée pistolet et le garde-main de la réplique sont en bois véritable de haute qualité, et les autres pieces sont en alliages métalliques, y compris le lower en acier, un cache culasse en acier et un canon en acier. Le mécanisme est une Gearbox v3 renforce avec systeme EBB (Electric Blow Back).

L'ensemble comprend :

  • Réplique LMG
  • Chargeur en acier 380 billes Hi-Cap
Chaque réplique passe un contrôle initial. Elle est vérifié et testé sur chronographe XCORTECH X3200.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: 1101 · EAN: 5901698406714 · JG1101 EBB Full Metal [WORKS J.G.] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport