[Ensemble] Réplique Mitrailleuse MG42 Full Metal AEG - Real Wood [AGM] + Batterie Li-Po 1500mAh 11,1V 20/40C [VB] + Chargeur de batterie compacte...

Chargeur de batterie globalement correct pour le prix. Il fait le travail sans problème et permet de recharger sa batterie simplement, ce qui est largement suffisant pour débuter. La charge est stable et je n’ai pas rencontré de souci particulier d’utilisation.
Petit point à noter tout de même : il chauffe légèrement pendant la charge.

Je rêvais de cette replique depuis longtemps et je l'ai enfin ! Mais il y a quelques détails qui posent problème : le hop-up n'est pas assez serré et se dérègle tout seul avec le temps, il y a du jeu dans la crosse, la sécurité est difficile à enclencher mais s'enlève d'une simple caresse du doigt et l'interne de la gearbox est en plastique ce qui n'est pas génial pour une réplique de soutien qui tire uniquement en automatique ...

Simple, rapide et efficace ce chargeur premier prix fait largement le taf. Les 3 led que le dessus permettent de savoir facilement si la batterie est chargée. La charge quand à elle ce fait tres rapidement compter 1h20 pour une batterie 7.2 volt. Le chargeur comprend aussi un adaptateur pour les batterie 9v volt

Superbe réplique qui avec un peu de travail pour lui donner une patine fait fureur ( sans jeu de mots ) ! Seul point négatif serait pour moi l’absence de marquage mais avec un peu d adresse on peut y remédier

Une réplique vraiment impressionnante dès l’ouverture du carton. La taille imposante et le poids conséquent donnent immédiatement une sensation de réalisme bluffante. On sent qu’on a entre les mains une pièce sérieuse, stable et bien équilibrée une fois en position. Ce gabarit renforce clairement l’immersion, que ce soit en partie ou en exposition.
La cadence de tir est tout simplement impressionnante, avec une rafale rapide et nerveuse qui rappelle parfaitement l’esprit de la MG42. C’est un vrai plaisir en jeu pour du rôle de soutien.

Le montage est simple et rapide, sans difficulté particulière, ce qui permet de la mettre en service rapidement même sans être expert. La crosse en bois est de très bonne qualité, avec une belle finition et un rendu authentique qui ajoute énormément au charme de l’ensemble.
Enfin, le conditionnement est soigné et efficace : la réplique est parfaitement protégée dans son emballage, ce qui évite toute mauvaise surprise à la réception. Une pièce massive, performante et esthétiquement réussie.

Franchement, excellent chargeur de batterie ! Dès la première utilisation, on sent que c’est du matériel fiable et bien conçu. L’appareil est solide, facile à utiliser et très sécurisant. Les indicateurs LED sont clairs, la charge est rapide et surtout très stable, sans surchauffe ni risque pour les batteries. Le système de protection intégré contre la surcharge et l’inversion de polarité inspire confiance, et ça se voit que le fabricant a misé sur la fiabilité avant tout. J’ai testé plusieurs types de batteries (LiPo, NiMH, etc.), et tout fonctionne parfaitement. Les connectiques sont de bonne qualité, bien ajustées, et le chargeur ne fait pas de bruit inutile pendant la charge. Ce que j’apprécie le plus, c’est la précision : la batterie sort toujours avec une charge complète, sans perte d’autonomie au fil du temps. Compact, léger et pratique à transporter, il est parfait pour les sorties airsoft ou pour un usage régulier à la maison. Très bon rapport qualité/prix, c’est clairement un indispensable pour garder ses batteries en bon état. Je recommande sans hésiter à tous les joueurs sérieux qui veulent du matos sûr et efficace.

Très bon chargeur de batterie Lipo , il ne chauffe pas est a l'air de très bonne qualité, a voir sur long terme , mes pour le comment je ne suis pas déçu, très bon prix, je le recommande au future acheteur.

réplique sympa malgré le manque de troue a l'avant de la cage du Cannon ce qui peut rendre pas très réaliste, la couleur du bois est pas bonne non plus, sinon pour le reste c'est top surtout pour 600e la sécurité par contre est a revoir car trop sensible ou parfois ne fonctionne simplement pas. elle est tout de même incroyable au tir et en décoration / exposition lors de reconstitution (changer la couleur de la cross !) la boite toujours aussi stylé type grosse caisse métallique (en carton) le bipied très facile a monter ainsi que le drum, des originaux passe sans problème idem pour des bande de munition ( a quelques bricoles prêt)

The compact Li-Po battery charger is an excellent choice for on-the-go airsoft players. It's lightweight, small, and easy to carry. The charger is also very user-friendly, providing quick and efficient charging for Li-Po batteries. However, it's important to note that some compact battery chargers may not be able to charge high-capacity batteries or require an adapter for certain electrical outlets. If you're looking for a convenient battery charger for mobile use, the compact Li-Po battery charger is an excellent choice.

Très bonne batterie !

Se place sans problème dans un tube de crosse type m4. Son taux de décharge donne une belle cadence de tir à la réplique et la tenue tien sans problème une bonne journée complète sans exagération

Très bon rapport qualité prix, indique le niveau de charge de la batterie avec 3 diode différente.
Ce qui permet de ne pas charge la batterie trop longtemps et de l’usée.
Je recommande cette article.
Produit conforme à l’annonce et très bien emballé à la livraison

Produit répondant à mes souhaits, vous pouvez suivre le chargement de votre batterie grâce aux trois diodes qui deviennent verte au fur et à mesure de la charge. Très bon rapport qualité prix, je recommande.

I recently purchased this airsoft charger, and while it's definitely not the best charger available, it does exactly what it's supposed to do. If you're looking for something simple and affordable to keep your airsoft batteries charged, this is a solid option.
The build quality is decent for the price, and it's easy to use, even if you're new to airsoft. Just plug it in, connect your battery, and let it charge. It doesn't have advanced features like automatic balancing, digital displays, or fast charging that you would find on higher-end chargers, but that's to be expected at this price point.
Charging times are reasonable, although not the fastest. It gets the job done without any major issues, making it a good backup charger or a reliable choice for casual players who don't need premium performance. I've used it several times, and it has worked consistently without overheating or causing any problems with my batteries.
Overall, this charger offers good value for the money. It's not designed for serious enthusiasts who want the latest features, but if you just need a dependable charger that works, this one is worth considering. It may not be perfect, but it gets the job done well enough.

I bought this little LIPO charger because my others one broke down .It does exactly what it says. It balances my 2S and 3S batteries well, and the red-to-green lights let you know when each cell is done. No screen, no fuss, just plug in. It's slow, but it's simple . If you're a beginner or need a backup, this is solid. Just don't expect high-end features, it's strictly a basic and just does the job.

In my opinion, this is the best choice for anyone looking for a reliable, easy-to-use charger for their replica batteries. After using it for several games and sessions, my experience with it has been entirely positive. I primarily use it to charge 7.4V and 11.1V LiPo batteries, and so far it has always worked reliably and without any issues. What’s particularly important to me is that there are no complicated settings to deal with just connect the battery, plug in the charger, and it’s ready to go. This is especially useful when getting ready quickly before a game. The charger’s small size is a huge advantage because it fits easily alongside my airsoft gear, so I can easily take it with me for weekend games or multi-day events. The LED indicators are clearly visible, so I always know where the charging process stands. The balance charging function provides extra safety, which I think is essential for LiPo batteries. Another plus is that it doesn’t overheat during use, operates stably, and I haven’t had a single issue with any battery so far. Obviously, it’s not a professional, display-equipped, programmable charger, but for airsoft purposes, I think it’s completely unnecessary to spend more than this if you’re looking for a reliable basic charger.

De B3Pro compacte LiPo-lader is een prima instapmodel voor wie op zoek is naar een eenvoudige en betaalbare manier om LiPo-accu’s op te laden. Het apparaat is compact, licht en werkt direct op netstroom, waardoor je zonder gedoe snel aan de slag kunt. Dankzij de balance-functie worden de cellen afzonderlijk geladen, wat bijdraagt aan een veiligere werking en een betere levensduur van je batterij.

Wel is het duidelijk dat deze lader vooral bedoeld is voor beginners of hobbygebruik, omdat hij geen geavanceerde functies heeft zoals instelbare laadstromen of opslagmodus. Toch doet hij wat hij moet doen: betrouwbaar opladen zonder ingewikkelde instellingen. Al met al is de B3Pro een goede keuze als je een simpele, no-nonsense LiPo-lader zoekt voor dagelijks gebruik

Great gun, looks good, but requires a some or a lot oft tnkering. Mine might have just been faulty, but the tapped plate broke shortly after first usage of the gun. I believe it is made for 8.4v batteries. So if you plan to use it with an 11.1V i reccomend also replacing the magazine battery with a stronger one so the bb's feed properly. After a bit of tinkering this guy is a beast and gets a lot of attention.

To put it simple this is a very good charger. I thought that my batteries got charge fast. it's very small so it's easy to bring it where ever you go. Don't forget the price. like always Taiwangun have good cheap stuff

I’m not into Airsoft (yet) but I wanted to have a MG42 in my collection that is affordable. At 1/20 if the price of a real one this is the best alternative! Very well made repro … only the bolt etc is not there due the airsoft mechanics. From the outside it looks very real! Even the Zweibein/bipod is a well-done replica! Only a pity the Airsoft battery and Air-target crosshair is not included …

Top charger - top price.
I bought 3 of these chargers. All my airsoft guns are now working with Li-ion batteries because the original Nimh batteries are now waste after 3 years. It works for all Li-ion batteries 7.4V and 11.1V (2 cells and 3 cells).
no need to buy an expensive charger able to charge Nimh as well as Li-ion. Better change to Li-ion batteries with this charger.
It is fast charging, what ist not good for all batteries, but Li-ion support much more charging current as Nimh.
Best choice for a god price.

Had no problems whatsoever with charging my 7,4V LiPo-batteries. Am yet to try it with the 11,1V I've ordered, but I can't think there'd be any trouble. They charged pretty quickly as well and are just overall very sound.

Réplica muy buena ,se la ve robusta,acabados muy buenos,por mucho que diga la gente de externo es idéntica a la g&g ,se le echa en falta el cargador y la batería que no la trae,la réplica se tiene que montar ,mostrar especialmente cuidado con la culata ,por qué la puedes meter mal la primera vez y cuesta sacarla luego

It does what it's made for. I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left. Vingardium leviosa. I really don't know what to say....

For the price, it's really worth it. It works better then my friends. You can actually see wich cell is charged, and with the help of this, you can see wich cell is damaged. Because of this new charger (because I used to charge my battery with my friends charger), I realised that my old Li-Po battery is gone bad, so I had to buy a new one. If I wouldn't have bought this battery charger, I wouldn't know what went wrong: my battery or my gun

I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left to charge and doesn't overheat itself or the battery at all. Unless you want one of those big fancy ones with a screen telling you everything that's going on (which you realistically don't need for airsoft) this is the best pick.

Definitely the most eye catching piece of kit you could have on the field it really stands out and feels like a beast in the hands not for running and gunning it really is a support gun through and through with it's size and weight great for holding down and area or defending and objective build quality is superb with it all being made out of metal and the stock out of wood so it's sturdy my only issue is the stock has a very small bit of wobble nothing major only because that's where the battery is stored so you'll be twisting it on and off quiet abit apart from that this is the cheapest you'll find an MG42 on the Airsoft market the only other one is the G&G brand but that is way more expensive so if you're looking for an affordable/fun replica of the MG42 this is where you'll get it without breaking the bank.

Fast reliable and very affordable charger, takes about an hour to fully charge a 11.1V 1300mah lipo. Also very fast delivery and packaged safely. Im writing the rest of this text cause it needs to be 200 characters long :)

Great charger! The 3 leds give a nice red and green indicator on which cell is loaded. That way you know when to take the battery off the charger. For the rest it charges and haven't had a single problem with it.

I don’t know if its only with me, but from the very first use of the charger it did not perform well. I put my 11.V li-po battery in it and it said that it has no charge so I left it as it is. After more than an hour not even one cell was charged. Then I reconnected the battery with the charger and it showed that it was fully charged. Then yesterdays after my first game a put another battery, brand new, to charge it. Left it overnight (i know its not good) and today i tetsed if it was fully charged- i was not. The green dots are always going from green to red despite the fact the battery has been sitting long enough to the charger

Very compact and light B3Pro charger. It is used for LiPo/Li-Ion batteries. Item work out of the box, yust plug it in a wall outlet and plug in your replica battery. I have used it many times and it works very good.

I really like this 11,1V 1500mAh Li-Po battery. I have been using it for a long time and it works very well. It can whitstand a longer airsoft game without any problem. I would say that 8 fields has very good quality items.

The replica was in very nice condition,well made with nice touches and a realistic feature.i have purchased another guns too from Taiwangun and I'm very pleased with these and with the customer service.

The replica was in very nice condition,well made with nice touches and a realistic feature.i have purchased another guns too from Taiwangun and I'm very pleased with these and with the customer service.

It’s a great charger, can charge 7.4-11.1 Li-Pos without any problems. Great price, simple and trustworthy. My friend got one too, since he had an Ipower B3 charger, which has electroshock problems…

In conclusion, great-great-great, get it! :)

Have a nice day!

An expencive but fun replica!
This replica is very realistic/good for displaying and playing. It's also a great "fidget" machine; it has a lot of things to open/unscrew/flip/slide....
Construction: The main parts are made out of some metal (not steel). I also handled a older version of this one and there were no major breakages; some parts were worn (where you attach the bipod for example). The replica comes partly disassembled; if something doesn't want to go together, don't use force. Wiggle the parts or try reattaching - otherwise you'll break something. When I attached the side charging handle, it was very loose - I don't know if that's correct. Bipod looks sterdy, but don't be too ruff with it ; the attachment point is made out of pot metal.
The battery compartment is a bit small: the longest battery you can stick inside is about 160mm and about 30mm in diameter (24mm x34mm does not fit inside the tubular stock compartment).
The performance was good; about 1,2J with 0,32bbs and hop set. ROF was also high (about 1000 rpm). The hop-up is hard to adjust: you have to open the top cover and remove the feed tray to wreach the hop lever. The stock inner barrel is about 600mm long and the hop is simmular to AK design. Metal hop chamber has a lot of room inside for the hop-up rubber - use some teflon tape.
The gearbox: it's two part design. The lower has the motor inside the pistol grip and it holds the gears. They were greased very little and shimming isn't great, but it sounds good. Upper gearbox is very thick and it looks that it could handle stronger springs. It also has a QC spring system (very simmular to M60/M249). The nozzle is plastic and 29,4mm long, cylinder head is long type (like in the M60). Piston head and piston are both fully plastic. It has a 0 type (full) cylinder and air seal was exelent (without the air nozzle). Inside there was an M110 spring.
The drumm mag is a peace of work. Full of catches, levers and doors. It holds about 1500 bbs, but it doesn't feed all of them. It is powered by 4 AA batteries (I think) and it winds when you hold down the trigger. I don't think it has a clutch system. On the older replica I had to fix the magazine; the spinning feed tray, that pushes the bbs into the flexible channel was stripped - it was spinning freely on the motor axel). However, so far I had no problems with the magazine.

At last, there is an affordable MG42 that can deliver suppressive fire as it is supposed to be. Do not expect a similar quality as the G&G version, but this AGM can keep up nevertheless. As with any AEG replica, sooner or later, you will have to focus on upgrading and maintenance to get the best out of your gun. Still, out of the box, this AGM MG42 does an impressive job.
The stock may wobble a bit (not the wooden stock itself, but the metal attachment that goes into the rear of the rifle). This can be easily fixed with some tape. The real wooden stock brings an authentic touch to it all.
The mag requires four 1.5V batteries for the servo-motor that shovels the BBs out of the mag and pushes them into the flexible hose towards the "breech" from the top. Attaching the mag does not take long, once you get used to the procedure: fill the mag with batteries and 2500 BBs, position it onto the front hook while guiding the BB-hose towards the BB-entrance hole. While closing the rear hook, gently push the BB-hose into the hole until it snugly fits. Then, connect the wires between the mag and the gearbox, so that the mag-servo will be activated, once you pull the trigger. It's simple and intuitive, once you have done it a few times.
Reloading BBs during a skirm does not require detaching the mag. You can slide it open at the top, just enough as to allow for a refill with the help of a funnel, or out of a bottle, if you practice that procedure a bit before the battle. Then, close the sliding lid and your mag is full again.
I have tested mine with one of my usual 11.1V lipo batteries. The rate of fire is amazing, although I did not measure it yet. The mag needs some time to push the first charge of BBs into the "breech", so that my first impression was disbelief: why does it not shoot any BBs? After a few seconds, they came out of the muzzle. Hundreds of them, in a few seconds. And straight. Very nice grouping, although that criterium was not on the top of my list, when I considered buying this MG42.
You may want to do some maintenance and perhaps upgrading on this gun, as with any other. The gearbox can be detached from the receiver with a few actions, it's not complicated. Exchanging the spring is really simple, due to the quick detachment design.
Before I'll take this MG42 to the field, I want to inspect the interns and estimate as to what may need some attention. It shoots well, but I want to ensure that it stays like that.
You will definitely bring some fire power to the field when you get yourself this gun. Bring a lot more BBs with you though, you are going to spend them quite fast, while keeping those heads low over there!

Guy is awesome and unique. Material is fine its good quality but not top tier. Easy to asemble. I had issue with little "door" on mag. It was blocked and slided a few time from place that was holding it. Its an easy fix. Great gun for some casual player or cosplayer. Im using 11.1v battery and its shooting really fast.

two of my airsoft buddies got this charger and it is the best one for that price, perfect charger for new players on low budget.
works well on both 11.1v battery as well as 7.4v batteries

Hello, I've been using this type of battery for quite a few months now and it's working beautifully for me. I use it in two types of weapons, a Scar-h and an M249, both of which work perfectly well for me and usually one battery lasts me a game. With the M249, sometimes need the other depending on how much you shoot with it. From a technical point of view, I tested the accumulators and they match the data in the description. I think this battery is a very good buy based on the price. I hope I could help.

Hello, I've been using this type of battery for quite a few months now and it's working beautifully for me. I use it in two types of weapons, a Scar-h and an M249, both of which work perfectly well for me and usually one battery lasts me a game. With the M249, sometimes need the other depending on how much you shoot with it. From a technical point of view, I tested the accumulators and they match the data in the description. I think this battery is a very good buy based on the price. I hope I could help.

In terms of price/value ratio, I think it's worth it if you don't want to spend a lot on a battery charger that can charge both 7.4v and 11.1v batteries. It charges my 1200mAh battery in about 2 hours at 11.1v charge.

Its easy to bring with yourself everywhere if you want,fast and safety charge beceause of the little led lights. Its just a charger, but cool.

A very good charger for Lipo/ Li-ion batteries.
The price is also good like always with taiwangun. I think that taiwangun is the best shop for airsoft in europe. The pric's for batteries are also good. I buy 2 Lipo 's and they work fine.

The B3PRO compact lipo charger is an excellent choice for airsoft enthusiasts as well. This charger can be ideal for safely and efficiently charging lithium polymer (LiPo) batteries used in airsoft guns.

Its small size and lightweight design make it easy to carry to airsoft matches or adventures, allowing you to charge batteries anytime and anywhere to ensure they're always ready for action.

The B3PRO charger features several safety functions, such as overheat protection and short-circuit protection, ensuring that the charging process is safe and proper.

However, it's essential to always follow the manufacturer's recommended charging and usage guidelines to prevent battery damage and ensure their longer lifespan. With the B3PRO, you can easily maintain the performance of your airsoft guns, ensuring they're always ready for the next battle.

Does the job well. A fantastic option for your Tamiya batteries, one of these chargers is a must-have for keeping your models powered up.

Offers safety and peace-of-mind when charging batteries, it can be quite stressful and dangerous to charge directly, in my opinion this is the best option for the price!

I bought this as a budget charger and it does what it needs to do, it doesnt have any fancy features etc but it serves its purpose, happy to recommend this to anyone looking for a budget basic charger

The product serves it's purpose. Could use a percentage display. The three LED displays the bare enough information. Recommend to use in a room with adequate ventillation. Product can heat up during use.

Én egy 11,1 V-os akumlátor töltök ami Lipo nagyon gyorsan feltölti és szépen működik is vele minden. Nagyon jó a kijelző rajta hogy látom hogy mennyire van feltöltve az akkumulátor. Ár érték arányban nagyon megérte megvenni nem csalódtam benne. Gyorsan ideért megvagyok elégedve vele.

Cheap charger, works well.
Don't expect features such as load balancing or discharging to a better charge for safer storage. Those are more expensive.
But it does the job well.
Definitely buy a LiPo charger so you can see the percentage of your battery before/during/after play.

Perfect for M4 tubes. It's really well made!

Produkt zgodny z opisem, szybka i bezproblemowa dostawa. Działa bez zarzutów, zapakowany bardzo dobrze, brak jakichkolwiek mankamentów. Jestem mile zaskoczony obsługą klienta i profesjonalnym podejściem. Widać ze ten sklep prowadzą osoby z pasją.