[Ensemble] CM.099 réplique sniper VSS Vintorez [CYMA] + Montage pour optique SVD - Black [CYMA] + Viseur point rouge airsoft PK-AW Pour AK/SKS/SVD...

Miam miam !
Ma 5eme replique de chez Cyma (aucune objectivité) et comme annoncé, les 1.7 joules a la 0.25g sont là. Très bonne précision.
Pas fan des chargeurs avec molette, mais ça le fait quand même. Précis à 50 mètres sans lunette.
Arme atypique, presque trop belle pour la sortir. Le seul bémol c'est l'upgrade de la lunette qui peut coûter chère.

Ce monte parfaitement sur le SVD CM 057T. Parfait pour y mettre une belle optique.
Si jamais il y a du jeu au premier montage, il faut appuyé sur le système de fermeture en compressant le ressort et serrer la vis. Ensuite ça ne bouge plus

J'ai reçu le cm099 récemment, je trouve que la réplique est de bonne qualité, la finition est plutot solide pour le prix.
Cependant à la réception j'ai noté quelque rayures sur la réplique? Probablement lors des QC, pas de chance pour moi! et également la batterie fournie d'origine ( la nihm ) complétement HS...
J'ai monté dessus le AK Side mount Cyma (compatible mais pas parfaitement centré) et un red dot Victoptics. Une fois montée avec une lipo qui fonctionne, elle a l'air vraiment pas mal a utiliser mais prévoyez un changement de ressort pour baisser un peu les fps! reçu a 410fps avec de la 0.2

Très bon viseur.
Très joli et de très bonne qualité.
Facile à régler, même en cours de partie.
Seul petit bémol, les graduations pour l'intensité lumineuse du point rouge ne sont pas intuitives, 5 correspond à la plus faible intensité alors que 1 correspond à la plus forte intensité.
Il mérite malgré tout ses 5 étoiles !

Première réplique airsoft que j'achète et j'en suis très satisfait, rien à redire pour l'instant, que ça soit niveau précision, esthétique, performance... Pour le prix qu'elle coûte en plus vous pouvez y aller les yeux fermés !

Bref, même si ce n'est pas fidèle à la VSS original pour moi ce n'est pas un problème je la trouve aussi bien ainsi.

Lunettes point rouge au look très réaliste belle finition peinture noire. Les tourelles ont un clic agréable avec des inscription en russe.
Intensité du point rouge réglable sur 5 positions plus off.
La pile est fournie.
Visée confortable.

La réplique dispose d'un changement de ressort rapide, pas besoin d'extraire la gearbox, il faut juste retirer le faux bouton de démontage de la crosse situé derrière le top cover. La Lipo 11.1v passe sans problème. La réplique d'origine a une puissance de 1.8.j mais un ressort 1j est fourni dans la boîte. La qualité de la réplique est exceptionnelle, et les performances d'origine sont remarquables.
Je recommande pour tous les amoureux du vss

Acheter pour mettre sur mon dragunov cyma coup par coup.
Franchement ça donne un jolie style à la réplique.
De plus l'installation est facile et tout se met bien aligné une fois installé.
Compatible avec tout les accessoires qui vont sur du picatinny.

Personnellement j'y ai mis une lunette 4x32 et le rendu ainsi que la précision sont au rendez vous !

Une très bonne réplique, avec plusieurs avantages, comme un rechargeant facile et rapide, une cadence de tire plutôt appréciable pour de l'AEG, un look incroyable pour moins de 200€ et une très bonne qualité sur quasiment toute la réplique, les partes en métal sont très bien réalisés. Seul bémol la crosse en plastique, mais c'est une pièce changeable facilement.

Après 1 ans d'utilisation la réplique est robuste, je n'ai jamais eu de cassure lié à la gearbox, seulement certains petit saut du levier de contrôle, du mode de tir mais c'est possible à réparer sans même démonter la réplique

Cyma a bien évolué! Réplique de très bonne qualité, avec un interne vraiment top! les matériaux choisi sont très bon, le packaging et complet, juste penser à prendre des billes avec et c'est parti!!! La portée et la precision d'origine n'ont rien a envier aux autres répliques, si comme moi vous jouez cette réplique en type DMR, c'est parfait!!! Certains fabricants devraient s'inspirer de Cyma, ils ont réussi la ou LCT et les autres ont échoué, nous fournir une réplique avec un rapport qualité prix imbattable!

Ajoutez a ça le service de Taiwangun, et c'est le combo parfait!!!

The replica works fine stock, 1.2J out of the box.
It feels sturdy and i had no problems on the field.

However today i got the SVD rail from cyma which is supposed to fit on this gun without problems and as soon as i pulled the lever for the centering pin the bottom of the dovetail mount broke off the gun.

So if you want to run this with ironsights its a good gun without issues (so far).
But the dovetail is very fragile so i can't recommend it if you want a rail on top.

MY childhood dream was a VSS and now i can afford it, so i've bought one.

Pros:
-fully metal
-feels heavy, it's almost 3kg with no mag in
-fast spring replacement system
-awesome accuracy
-1.55 Joule with 0.28BBs out of the box
-not the cheap plastic feeling on stock and handguard
-hard to break, everything on it's place

Cons:
- after 4-5 games i've noticed it doesn't wanna fire semi sometimes
- with an almost empty battery it jammed on a point where i couldn't shoot even with a replaced, fully charged, so i had to remove the spring and make the cycle of gears manually end
-the iron sight is hard to adjust, but it's not a big mistake, since this gun is a weaker DMR category, so Optics needed
-hard to find spare mags, you can buy it on taiwangun too (god bless you guys)
-it likes only one specific side mount, tried four of them, but only one fits, you can buy it on taiwangun too (god bless you guys)

The only mount fitting perfectly for the CYMA VSS CM099. A little tricky to find the good spot on the gun, but then it works well. Tried on older CYMA kalashnikovs, although it's fixable, but it's not on the center of the gun, reminds me a little the PSO from the S.T.A.L.K.E.R. 2

I personally love the vss vintorez and I am happy to say that this airsoft replica is an absolute beauty and has good weight and feels sturdy aswell, wich isn't surprising when one notices how much metal there is on this for the stock and half of the body most is metal and makes this replicate very nice

Absolutely amazing rifle! The chassis is made out of robust materials, specifically aluminum. The weight is really close to the real deal. The plastic used is really high quality so the stock also feels robust and well built. The trigger is snappy, the gearbox is reliable and it delivers outstanding performance. I get around 430-442 FPS straight out of the box with 0.25g BB's. The magazine attaches nicely without much play if any at all.

Only complaint is that it's recommended to run a dedicated scope which will run you quite a lot of resources.

Otherwise highly recommend it!

The barrel wobbles out of the box, the body is made of cheap aluminium, and the dovetail mount was very stiff and I could hardly mount my scope on it, and it also broke before I could even take it to a game.

Bought it for CYMA VSS, it arrived in 2 business days, sturdy metal construction. Only real gripe I have with it that it's a tight fit for a cyma rail. Besides that it doesn't wobble and stays on.

Use rubber hammer and lightly tap it so you don't scratch it and it will slide in without a problem.

Bought to use on my cyma svd aeg, tried mounting it exactly as shown in the pictures. This is too loose, it wobbles 1-2 cm in both directions, this is absolutely not usable with the cyma svd and should not be advertised as such.

I used on vss, saw some people complaining about it but for me was ea to mount it. Is feeling pretty stiffed but never had any problem of dropping it from the weapon, the only problems is kinda heavy with scope on it u get atleast 700g or even more + plus weapon 3 kg.

Very cool looking gun, I had no problems for now and the attachments stay great on it, range on it seems good about 40m no problems. The only problem I had was with battery never charging full but i could atleast 5 6 mags of 330 untill it run off.

As usual top quality, fast delivery and good prices. I bought multiple items, two replica's and a few magazines, no complaints!
Especially happy with my new SR25, out of the box a very good gun.
Happy to buy here again, and again,

The fire selector is not the best first time I took for a game it got stuck in full auto.
Please try it when it comes from retailer but I fixed and now it's nice.
Amazing gun stock, more a niche and now this shop has the mags for this particular replica.

Loving the gun, it works very well and is getting great performance out of the box, and Taiwangun's while it took quite some time to get the package shipped because of the time i ordered, shipping time was very short overall, and i don't blame Taiwangun for the length in the shipping.
I am overall quite pleased

I ordered the replica with 320fps and sadly when the TG tech reassembled he pinched/damaged the wiring and the replica was not working properly. I had to get the replica rewired because if I would've sent it back it would've taken weeks probably.

@Brendan
Another problem I noticed is when pushing the selector too high up in safe position the selector plate won't move anymore and the replica only has "safe-full auto-full auto" without semi. To fix this you have to push the selector plate to the right so the gears can engage it and improvise a stopper so it won't go too far to the right.

Since there are no Cyma mags in stock I ordered 120rd midcaps King Arms that need some dremeling but they fit and feed lovely.
(search youtube: Cyma CM.099 With King Arms Mid Cap Magazine How to Tutorial)

This replica has Quick Spring Change! It's not mentioned anywhere in the description but to my surprise the newer versions have it.

I installed a Blitzkrieg mosfet and with 11.1v LiPo it shoots really well and haven't had any issues with it.

This gun definitely shows the CYMA AK quality and I really would recommend to anyone looking for a VSS. But before buying a VSS/AS, please understand that the gun is a giant suppressor, and suppressors are heavy as heck. This gun features light weight polymer and stamped steel, but the full 13.5 inch suppressor is solid steel and will hurt your back after long travels or engagement. The awkward weight balance and sticky rubber buttpad prevent be from even remotely offering this as a cqc option. However, this is a great dmr.

The batteries I bought were slightly too big so I drilled a hole in the stock and cut one in the rubber to allow the battery to be run outside with the internals sealed, which is what I would recommend to anyone else buying this gun. I prefer my method over choosing a low capacity, smaller battery, or opting for a stick type nimh like the one included. The battery compartment in the stock is absolutely tiny, you may have trouble finding any batteries that fit.

My VSS however, has no semi auto, both modes on the fire selector (down is supposed to be semi, and middle auto), fire in full auto and I honestly have no idea why. I dont mind this "feature" however, because if I need semi, I can js quickly pull the trigger to only fire one shot. This uses a 3 position fire selector like a standard ak, unlike the real steel VSS/AS.

This is one of the best quality guns you can get at this price point, I am in love with how it feels and performs. My personal choice for a rifle under $200.

Needed a mount for my cyma vss vintorez, it fits but its a bit too thick and needed to force it to fit,it only went half way and got stuck so its good it wont fall off.
Its a bit heavy so will add to the replica weight. All in all im satisfied.

Very good replica for the price,whats not to like? Played a game with it, mounted a scope on the svd side rail mount, it was a bit of work to fit it,didnt go all the way because its too thick,but it doesnt come off easy so its working good. With 9,4v battery provided in the box it shoots really good and accurate on 40-45m max with 0.3 bb. I like it and will upgrade it a bit

This is a great base for people who are looking to build a budget DMR. The reactivity is already pretty decent with the battery it comes with so you can already field it out of the box. Just make sure to clean the barrel and use the heaviest bb you can hop. For my upgrades, I'm planning to add a Perun ab++ mosfet and set it in DMR mode + precocking, combined with 11.1 lipo and SHS 13:1 gears + shimming to get good reactivity. For accuracy and range I'll be using a stainless steel barrel that fits with an maple leaf MR bucking 70°+omega nub. The cylinder head and hopup unit are proprietary so i'll keep those stock. Also going to "fakelite" the stock for the look since I can't get a wood one. Can't wait to finish the build and put it to the test :D

All in all the cyma vss is a externally beautiful and performant replica. The package arrived quickly and in great condition but upon opening the replica the outer barrel was slightly loose and rattling, the standard spring was also missing as I got the free spring downgrade and they claim they included the replaced spring. Fixing the loose outer barrel was a simple process of tightening two hex screws and while the original standard spring is mixing I did not need the higher fps but would have appreciated the option all in all good first experience with taiwangun.com and this unique model of replica from cyma

The replica feels sturdy and good, and shoots really good out of the box.
The hop up has a little screw that can be tightened when you set the hop so it doesn’t lose hop over time.
Only cyma mags fit in it so keep that in mind.
If you want a rail mount on the gun i would suggest the SVD mount that taiwangun also sells cause that one is on the middle of the gun.
All in all a really solid replica out of the box and i would recommend it.

I have been using this (vss) replica for months and I can say that is is pretty solid and performs well. I ordered it because I wanted a dmr that I can use it outdoor. The shooting range is between 50 and 60 meters with .25 bbs. The whole replica is made out of (high quality) aluminium and nylon. The gun shoots consistently and the hop up is working well too. I recommend using it with a holo sight because it worked me perfectly. The replica has a dedicated v3 gearbox which just works properly, I had no problems with it so far. It shoots around 435 fps out of the box and about 20 rps. The internal part are high quality. To sum up this gun is pretty high quality and it is well put together I can only recommend it if you are looking for a Dmr.

Really nice replica! Nice solid bild no wobble.
Will upgrade it to a dmr with new internals.
A ak bracket Will fit to use for a scope mount.
Why i give it 4 stars i because of the fire selector internals wich is made out of plastic instead of metal wich makes quite easy to break..

I was very excited to get this replica, and it lived up to all of my expectations! You get an absolutely solid replica, there are no movements or any play on the gun. It shoots great, both distance and accuracy wise, truly impressing out of the box. I tried using it with 0.28 BBs, but I will switch to heavier for the upcoming games. You should use it with at least 0.30s to achieve the full potential of the rifle.
The side mount CAN fit rails designed for AKs, but the optic will be offset significantly to the right.
I'm satisfied with the rifle, it's extremely good out of the box, but also good for an upgrade base.

Fits perfectly!
No mod needed for the rail.
Looks amazing and has a great Red Dot! Sharp looking on my E&L Ak 74
Question here is if there is a Killflash for it?

prima en solide airsoft wapen makkelijk dat de batterijen in de kolf kunnen , hopup is niet de standaard ak versie ,ook wel handig dat er een snelwissel systeem op zit om je veer te vervangen om je fps aan te passen

The cm.099 ore VSS vintoez is a rifle I dreamt of fore very long time and this one is very good fore the price especially when my planes is to convert it to hpa in the next year but ti's a solid gun out of the box shutting extremely accurate fore being a stock gun and like I told before Taiwanguns have unbeatable prices of there products

Very good relpica, feels good in hand with soild build, mags fit nicely, very good trigger response, high quality constuction, comes with high cap mag and battery with charger, perfect for mil-simwould recommend

First of all this is a pretty good replica out of the box. I have already shot a couple hundred rounds and it is pretty consistent and has no probles. All in all I think this is one of the best vss vintorez replica on the market.

There are some QC issues with this mounting rail as it is advertised being compatible with the cm.099 but when I got mine, it was slightly too small and was impossible to slide on. It's a shame as I really like it otherwise and would have been a massive improvement over my old one which had a very weak tightening mechanism.

We encourage you to contact the service department to solve the problem.

One of the best replicas of VSS Vintorez.
Good rate of fire on auto.
High velocity.
Accurate on single even without optics.
Reliable battery.
Best option for DMR on his class for low price.
Definitely good work from CYMA, and a good replica for your collection.

I just obtained this replica. Its a beautiful master piece. Especially for the price. The trigger response is very quick at this price point. I would almost expect there to be a mosfet in it. The only downside i have with it is that the dust cover is able to be forced up and down a little bit. But for the price a very solid replica!

I got this replica in order to make a DMR build. Out of the box it will not have a perfect performance, but I'd say it makes for a decent platform for upgrades.

It's relatively light and comfortable to handle. The stock leaves plenty of room for a mosfet and I managed to fit a 1450Mah 11.1V lipo.

The piston has only 1 steel tooth, which is a major weakpoint, but the spring guide is metal with a bearing (unlike a plastic one I've seen in an older disassembly video).

I ordered a 430 FPS version which should have put it at 1.7j energy. However when I chronoed it at home it outputed at 1.5j. After a bunch of tinkering and upgrades to the airseal and stiffer spring, I got to consistently shoot at 1.58j.

Verdict: If you plan to upgrade this, it will probably work for you. If you want an out of the box DMR precision, you will probably be left disappointed.

You can also fit the Cyma AK rail mount to the VSS.

A large replica; definately larger than I had expected. After adjusting the hop-up, this replica shoots great. Mind you, the CYMA midcap magazine doesn't feed well without soem minor adjustements (adding ducktape)

The Gun is perfekt shoots where you aim i played my first game with it it was perfect i recomend it alot it shoots 60 meters straight if you know how to use it it is perfect 5 out of 5 recomend it alot

When it first arrived it worked perfectly, after about 300 shots the gun stopped working. But I said no problem it can happen, so i sent the gun back. After a lot of arguing with support i managed to get the gun to them so they can fix it. I even had to pay for shipping myself. But things like this can happen so i didnt mind. When i got it back on march 10th i shot around 50bbs and it worked very good, the next day (march 11) I had to align the sight and i shot around 100 maybe 200 bbs and the gun just stopped working.
With the gun I also ordered the SVD rail which was supposed to fit on the gun. When I tried to put it on the gun it just damaged the exterior and the rail couldnt move anymore.
The replicas build is very good but the internals are bad and talking with support is very hard because their phone number doesnt work and the support mail team responds only once per day.

I bought this gun, It feels perfect, weight is good, looks perfect, i shot 2 magazins with it then it just stop working the gun makes a sound like an electric drill but it wont shot out the bbs, i checked there isnt any bb stucked inside, the problem will be inside the gearbox. Maybe it works perfectly for someone else but not for me, maybe im just not lucky.

Bonne réplique qualitative, acheter avec le pack chargeurs fait large le taff faut juste réduire un peu la puissance et ça passe en sniper/DMR.
Le support de viseur passe très bien sur la réplique également !

The SVD mount should be compatible with the CM.099 as it says but today i recieved both the gun and the mount and the mount doesnt fit. The mount cant get past the 3 lug, it cant get over. Either something is wrong with the mount or the gun.

I can only recommend this replica, it has really quality externals and internals. The stock wiring is a huge plus, you can easily fit a regular Ak type battery in it. Also a positive thing is that you can easily upgrade because of the V3 gearbox inside, so it is a good dmr base.
If you wan't to get more information make sure to watch my review on youtube:
https://youtu.be/g3pReUFhwYo

Gun shoots great only downside is the cylinder head being exclusive to this. Mag feeds great and gun feels absolute solid. Shipped fast and in great packaging. Out of the box the trigger is snappy selector plate skips full auto easily but I personally only use semi.

Great gun out of the box, the barrel woobles a bit, and the piston head rubber is just a bit small so it doesnt compress air well but its fixable with a new rubber seal.

The replica arrived perfect , this count also for the maple leaf inner barrel, the hop up and the low cap mags. The disassembly of the rifle was quite easy to pursue since it doesn't have all that screws and stuff. The rifle is perfect, nothing moves like it shouldn't, the mags feeds perfectly.

Good and solid external,inside is v3 gearbox except cylinder head which is v7(nozzle is not in center). Inside is standard motor with standard cyma gears(which are pretty strong),not good compresion and too much grease. Solid short ak nozzle. For dmr build pretty solid base.standard cyma svd scope mount is compatible

Good quality replica. Very fast delivery. Very accurate replica worked very well right out the box. Can be recommended. Hopup is easy to adjust. All the fuctions are easy to use and good quality for replica.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

Taiwangun is a sure thing site. I asked about this mounting apparatus for my Cyma VSS Vintorez and they told quite quickly that yes it was compatible.
I recommend taiwangun to all my buddies.
thank you team.
Luis

très bonne réplique ! Reçus un peu en retard mais pas de la faute de taiwangun :D le plus important est que le paquet était super bien protéger et ça c'est un excellent point !

Bref la réplique est très bonne, la batterie et le chargeur fournis avec fonctionne correctement.
Les seuls défauts seraient le chargeur high cap que je n'aime clairement pas (soit hs soit je l'utilise mal XD ) et le grip arrière qui a l'air super fragile et trop léger par rapport au poids de l'avant du fusils.

Voila sinon bonne et très belle réplique

One of cymas most sturdy replicas. Offer great range, barley wobbles and is properly air sealed. Only downside is the magasines. They are hard to fit in if you stress reload. It's easy to miss with the magasines thooth. Otherwise I'm very happy with this gun