[Ensemble] CM.099 réplique sniper VSS Vintorez [CYMA] + Chargeur Polymere Mid-Cap pour CM.099 Vintorez [CYMA]

Miam miam !
Ma 5eme replique de chez Cyma (aucune objectivité) et comme annoncé, les 1.7 joules a la 0.25g sont là. Très bonne précision.
Pas fan des chargeurs avec molette, mais ça le fait quand même. Précis à 50 mètres sans lunette.
Arme atypique, presque trop belle pour la sortir. Le seul bémol c'est l'upgrade de la lunette qui peut coûter chère.

J'ai reçu le cm099 récemment, je trouve que la réplique est de bonne qualité, la finition est plutot solide pour le prix.
Cependant à la réception j'ai noté quelque rayures sur la réplique? Probablement lors des QC, pas de chance pour moi! et également la batterie fournie d'origine ( la nihm ) complétement HS...
J'ai monté dessus le AK Side mount Cyma (compatible mais pas parfaitement centré) et un red dot Victoptics. Une fois montée avec une lipo qui fonctionne, elle a l'air vraiment pas mal a utiliser mais prévoyez un changement de ressort pour baisser un peu les fps! reçu a 410fps avec de la 0.2

Marche parfaitement bien avec mon vss cyma même mieux que le chargeur d'origine.

Première réplique airsoft que j'achète et j'en suis très satisfait, rien à redire pour l'instant, que ça soit niveau précision, esthétique, performance... Pour le prix qu'elle coûte en plus vous pouvez y aller les yeux fermés !

Bref, même si ce n'est pas fidèle à la VSS original pour moi ce n'est pas un problème je la trouve aussi bien ainsi.

Chargeurs de qualité pour du Cyma, dommage qu'il n'y ai pas de chargeurs courts comme un vrai vss sur CM099.

Le plastique est de bonne qualité, aucune trace de moulage et les billes se mettent correctement.

Chargeurs Mid Cap qui fonctionnent au top, et avec un prix ultra serré. Merci a Taiwangun de nous proposer cet article. Il rentre dans des poches AK/M4 standard, le plastique est hyper solide, aucun problème de feed bref, un produit indispensable pour le VSS CYMA.

Merci :)

La réplique dispose d'un changement de ressort rapide, pas besoin d'extraire la gearbox, il faut juste retirer le faux bouton de démontage de la crosse situé derrière le top cover. La Lipo 11.1v passe sans problème. La réplique d'origine a une puissance de 1.8.j mais un ressort 1j est fourni dans la boîte. La qualité de la réplique est exceptionnelle, et les performances d'origine sont remarquables.
Je recommande pour tous les amoureux du vss

Très bon chargeur pour la réplique Cyma Vss vintorez.
Se fixe bien sur la réplique et les billes parte bien comme il faut.
Top comparé au high cap qui fait beaucoup de bruit.
A quand des chargeurs low cap/real cap ?
Niveau qualité prix c'est top.

Une très bonne réplique, avec plusieurs avantages, comme un rechargeant facile et rapide, une cadence de tire plutôt appréciable pour de l'AEG, un look incroyable pour moins de 200€ et une très bonne qualité sur quasiment toute la réplique, les partes en métal sont très bien réalisés. Seul bémol la crosse en plastique, mais c'est une pièce changeable facilement.

Après 1 ans d'utilisation la réplique est robuste, je n'ai jamais eu de cassure lié à la gearbox, seulement certains petit saut du levier de contrôle, du mode de tir mais c'est possible à réparer sans même démonter la réplique

Chargeur de très bonne facture! Ils sont solide et feed au top! pour ma part je n'ai rien a dire dessus!
Ah en fait si,.. le prix.. encore une fois, Taiwangun et Cyma n'assassinent pas notre porte monnaie, et ca, c'est top!!!!

Cyma a bien évolué! Réplique de très bonne qualité, avec un interne vraiment top! les matériaux choisi sont très bon, le packaging et complet, juste penser à prendre des billes avec et c'est parti!!! La portée et la precision d'origine n'ont rien a envier aux autres répliques, si comme moi vous jouez cette réplique en type DMR, c'est parfait!!! Certains fabricants devraient s'inspirer de Cyma, ils ont réussi la ou LCT et les autres ont échoué, nous fournir une réplique avec un rapport qualité prix imbattable!

Ajoutez a ça le service de Taiwangun, et c'est le combo parfait!!!

Got my hands on the Cyma VSS - that's a decent starter as a DMR option. I would say that I chose it mostly for the looks and authenticity, but the stock build is very decent.

As most mid Cyma replicas - re-lubing and re-shimming is a must. Mine also lacked air compression that I've fixed with fresh o-rings and nozzle (also with o-rings). But I should point out that the nozzle and gearbox are bit different from generic AKs. Nozzle is 19.5mm, but 19.6mm fitted in mine

It also need a proper ETU with Mosfet that will support the usage of 11.1v batteries, since you will definitely want a quick trigger response - I would really recommend placing the Perun V3

Stock motor works fine even with both M130 and M140 springs (but consider that you will probably need to change the gears for that for stronger ones)

But, overall, it's a decent AEG DMR in stock variant and a great base for building a high-performant one!

The replica works fine stock, 1.2J out of the box.
It feels sturdy and i had no problems on the field.

However today i got the SVD rail from cyma which is supposed to fit on this gun without problems and as soon as i pulled the lever for the centering pin the bottom of the dovetail mount broke off the gun.

So if you want to run this with ironsights its a good gun without issues (so far).
But the dovetail is very fragile so i can't recommend it if you want a rail on top.

The only spare mag that actually fits and feeds well with the CYMA VSS vintorez CM099.
I've bought 3 of them, they work well.
CCA 1500 BBs shot out, no feeding problems, works as it should.
A little hard to put them into the magwell, but that's not the fault of the mag, that's the weird style of the gun, hard to swith from AK to VSS.

MY childhood dream was a VSS and now i can afford it, so i've bought one.

Pros:
-fully metal
-feels heavy, it's almost 3kg with no mag in
-fast spring replacement system
-awesome accuracy
-1.55 Joule with 0.28BBs out of the box
-not the cheap plastic feeling on stock and handguard
-hard to break, everything on it's place

Cons:
- after 4-5 games i've noticed it doesn't wanna fire semi sometimes
- with an almost empty battery it jammed on a point where i couldn't shoot even with a replaced, fully charged, so i had to remove the spring and make the cycle of gears manually end
-the iron sight is hard to adjust, but it's not a big mistake, since this gun is a weaker DMR category, so Optics needed
-hard to find spare mags, you can buy it on taiwangun too (god bless you guys)
-it likes only one specific side mount, tried four of them, but only one fits, you can buy it on taiwangun too (god bless you guys)

I personally love the vss vintorez and I am happy to say that this airsoft replica is an absolute beauty and has good weight and feels sturdy aswell, wich isn't surprising when one notices how much metal there is on this for the stock and half of the body most is metal and makes this replicate very nice

Absolutely amazing rifle! The chassis is made out of robust materials, specifically aluminum. The weight is really close to the real deal. The plastic used is really high quality so the stock also feels robust and well built. The trigger is snappy, the gearbox is reliable and it delivers outstanding performance. I get around 430-442 FPS straight out of the box with 0.25g BB's. The magazine attaches nicely without much play if any at all.

Only complaint is that it's recommended to run a dedicated scope which will run you quite a lot of resources.

Otherwise highly recommend it!

The barrel wobbles out of the box, the body is made of cheap aluminium, and the dovetail mount was very stiff and I could hardly mount my scope on it, and it also broke before I could even take it to a game.

Nice weight and typically good quality mags for the VSS. They are not the cheapest, but they will do the job better than any other...........!!!!!!!!!!!!!!! For a time I used the king arms on the cyma with a minor modification. I say don't bother. They are slightly cheaper, yes but the quality is way worse. Also they don't feed bbs right into the hopup. If you are looking to upgrade they will give you a hard time. The cyma won't.

Very cool looking gun, I had no problems for now and the attachments stay great on it, range on it seems good about 40m no problems. The only problem I had was with battery never charging full but i could atleast 5 6 mags of 330 untill it run off.

As usual top quality, fast delivery and good prices. I bought multiple items, two replica's and a few magazines, no complaints!
Especially happy with my new SR25, out of the box a very good gun.
Happy to buy here again, and again,

Fits and feeds perfectly in cyma cm.099.
They feel heavy and made of quality materials compared to the highcap mag.

A bit pricy compared to ak mags but on taiwangun it's the cheapest, other websites sell them for way more.

The fire selector is not the best first time I took for a game it got stuck in full auto.
Please try it when it comes from retailer but I fixed and now it's nice.
Amazing gun stock, more a niche and now this shop has the mags for this particular replica.

Loving the gun, it works very well and is getting great performance out of the box, and Taiwangun's while it took quite some time to get the package shipped because of the time i ordered, shipping time was very short overall, and i don't blame Taiwangun for the length in the shipping.
I am overall quite pleased

Feeds perfectly with my CYMA VSS Vintorez. Hope it comes back in stock soon as a few more styles would be nice.
and as always Taiwangun has the best customer service in the business.
We meet again soon

I ordered the replica with 320fps and sadly when the TG tech reassembled he pinched/damaged the wiring and the replica was not working properly. I had to get the replica rewired because if I would've sent it back it would've taken weeks probably.

@Brendan
Another problem I noticed is when pushing the selector too high up in safe position the selector plate won't move anymore and the replica only has "safe-full auto-full auto" without semi. To fix this you have to push the selector plate to the right so the gears can engage it and improvise a stopper so it won't go too far to the right.

Since there are no Cyma mags in stock I ordered 120rd midcaps King Arms that need some dremeling but they fit and feed lovely.
(search youtube: Cyma CM.099 With King Arms Mid Cap Magazine How to Tutorial)

This replica has Quick Spring Change! It's not mentioned anywhere in the description but to my surprise the newer versions have it.

I installed a Blitzkrieg mosfet and with 11.1v LiPo it shoots really well and haven't had any issues with it.

This gun definitely shows the CYMA AK quality and I really would recommend to anyone looking for a VSS. But before buying a VSS/AS, please understand that the gun is a giant suppressor, and suppressors are heavy as heck. This gun features light weight polymer and stamped steel, but the full 13.5 inch suppressor is solid steel and will hurt your back after long travels or engagement. The awkward weight balance and sticky rubber buttpad prevent be from even remotely offering this as a cqc option. However, this is a great dmr.

The batteries I bought were slightly too big so I drilled a hole in the stock and cut one in the rubber to allow the battery to be run outside with the internals sealed, which is what I would recommend to anyone else buying this gun. I prefer my method over choosing a low capacity, smaller battery, or opting for a stick type nimh like the one included. The battery compartment in the stock is absolutely tiny, you may have trouble finding any batteries that fit.

My VSS however, has no semi auto, both modes on the fire selector (down is supposed to be semi, and middle auto), fire in full auto and I honestly have no idea why. I dont mind this "feature" however, because if I need semi, I can js quickly pull the trigger to only fire one shot. This uses a 3 position fire selector like a standard ak, unlike the real steel VSS/AS.

This is one of the best quality guns you can get at this price point, I am in love with how it feels and performs. My personal choice for a rifle under $200.

Very good replica for the price,whats not to like? Played a game with it, mounted a scope on the svd side rail mount, it was a bit of work to fit it,didnt go all the way because its too thick,but it doesnt come off easy so its working good. With 9,4v battery provided in the box it shoots really good and accurate on 40-45m max with 0.3 bb. I like it and will upgrade it a bit

This is a great base for people who are looking to build a budget DMR. The reactivity is already pretty decent with the battery it comes with so you can already field it out of the box. Just make sure to clean the barrel and use the heaviest bb you can hop. For my upgrades, I'm planning to add a Perun ab++ mosfet and set it in DMR mode + precocking, combined with 11.1 lipo and SHS 13:1 gears + shimming to get good reactivity. For accuracy and range I'll be using a stainless steel barrel that fits with an maple leaf MR bucking 70°+omega nub. The cylinder head and hopup unit are proprietary so i'll keep those stock. Also going to "fakelite" the stock for the look since I can't get a wood one. Can't wait to finish the build and put it to the test :D

All in all the cyma vss is a externally beautiful and performant replica. The package arrived quickly and in great condition but upon opening the replica the outer barrel was slightly loose and rattling, the standard spring was also missing as I got the free spring downgrade and they claim they included the replaced spring. Fixing the loose outer barrel was a simple process of tightening two hex screws and while the original standard spring is mixing I did not need the higher fps but would have appreciated the option all in all good first experience with taiwangun.com and this unique model of replica from cyma

The replica feels sturdy and good, and shoots really good out of the box.
The hop up has a little screw that can be tightened when you set the hop so it doesn’t lose hop over time.
Only cyma mags fit in it so keep that in mind.
If you want a rail mount on the gun i would suggest the SVD mount that taiwangun also sells cause that one is on the middle of the gun.
All in all a really solid replica out of the box and i would recommend it.

I have been using this (vss) replica for months and I can say that is is pretty solid and performs well. I ordered it because I wanted a dmr that I can use it outdoor. The shooting range is between 50 and 60 meters with .25 bbs. The whole replica is made out of (high quality) aluminium and nylon. The gun shoots consistently and the hop up is working well too. I recommend using it with a holo sight because it worked me perfectly. The replica has a dedicated v3 gearbox which just works properly, I had no problems with it so far. It shoots around 435 fps out of the box and about 20 rps. The internal part are high quality. To sum up this gun is pretty high quality and it is well put together I can only recommend it if you are looking for a Dmr.

Really nice replica! Nice solid bild no wobble.
Will upgrade it to a dmr with new internals.
A ak bracket Will fit to use for a scope mount.
Why i give it 4 stars i because of the fire selector internals wich is made out of plastic instead of metal wich makes quite easy to break..

Solid mags made from durable plastic, dropped them a few times, but they hold up really well. It's a bit hard to load them up for the first time, but they break in easily. Almost same size as an m4 magazine, so they fit the pouches made for 5.56 mags.

I was very excited to get this replica, and it lived up to all of my expectations! You get an absolutely solid replica, there are no movements or any play on the gun. It shoots great, both distance and accuracy wise, truly impressing out of the box. I tried using it with 0.28 BBs, but I will switch to heavier for the upcoming games. You should use it with at least 0.30s to achieve the full potential of the rifle.
The side mount CAN fit rails designed for AKs, but the optic will be offset significantly to the right.
I'm satisfied with the rifle, it's extremely good out of the box, but also good for an upgrade base.

Bought these mags with the vss a long time ago the mags have a great solid build I dropped them a lot and they still work perfectly sometimes after use i get dirt in them but its no problem for the mag. Recently I decided to get 1 more mag and when it arrived the latch which holds the bbs was broken. I contacted support and i had no issues getting a refund. That isnt a problem of the mag I think thats the sellers fault but anyways the mags are solid and would recommend for any vss user.

prima en solide airsoft wapen makkelijk dat de batterijen in de kolf kunnen , hopup is niet de standaard ak versie ,ook wel handig dat er een snelwissel systeem op zit om je veer te vervangen om je fps aan te passen

Adequate quality according to price. Loads and feeds BBs very nicely. Has a strong feeding spring. Hard to disassemble (does not have a big unscrewable piece like many other magazines)
Almost fits the AY-VSS, the locking lip is a little bit big, needs to be files down to work properly. Without modification it does feed the BBs in an AY replica.

The cm.099 ore VSS vintoez is a rifle I dreamt of fore very long time and this one is very good fore the price especially when my planes is to convert it to hpa in the next year but ti's a solid gun out of the box shutting extremely accurate fore being a stock gun and like I told before Taiwanguns have unbeatable prices of there products

Very good relpica, feels good in hand with soild build, mags fit nicely, very good trigger response, high quality constuction, comes with high cap mag and battery with charger, perfect for mil-simwould recommend

First of all this is a pretty good replica out of the box. I have already shot a couple hundred rounds and it is pretty consistent and has no probles. All in all I think this is one of the best vss vintorez replica on the market.

One of the best replicas of VSS Vintorez.
Good rate of fire on auto.
High velocity.
Accurate on single even without optics.
Reliable battery.
Best option for DMR on his class for low price.
Definitely good work from CYMA, and a good replica for your collection.

I just obtained this replica. Its a beautiful master piece. Especially for the price. The trigger response is very quick at this price point. I would almost expect there to be a mosfet in it. The only downside i have with it is that the dust cover is able to be forced up and down a little bit. But for the price a very solid replica!

I got this replica in order to make a DMR build. Out of the box it will not have a perfect performance, but I'd say it makes for a decent platform for upgrades.

It's relatively light and comfortable to handle. The stock leaves plenty of room for a mosfet and I managed to fit a 1450Mah 11.1V lipo.

The piston has only 1 steel tooth, which is a major weakpoint, but the spring guide is metal with a bearing (unlike a plastic one I've seen in an older disassembly video).

I ordered a 430 FPS version which should have put it at 1.7j energy. However when I chronoed it at home it outputed at 1.5j. After a bunch of tinkering and upgrades to the airseal and stiffer spring, I got to consistently shoot at 1.58j.

Verdict: If you plan to upgrade this, it will probably work for you. If you want an out of the box DMR precision, you will probably be left disappointed.

You can also fit the Cyma AK rail mount to the VSS.

Cyma VSS mags that fit the Cyma VSS.
What more there is to say? They are light, but appear to be very sturdy so far.
The only thing lacking is the option for short mid caps. I would love a compact mag in the VSS.

A large replica; definately larger than I had expected. After adjusting the hop-up, this replica shoots great. Mind you, the CYMA midcap magazine doesn't feed well without soem minor adjustements (adding ducktape)

This magazine doesn't feed well, without minor adjustments. I had to put some ducktape near the lid at the top of the magazine to make it feed. Otherwise I had to manualy press te magzine into the right position to make it feed.

The Gun is perfekt shoots where you aim i played my first game with it it was perfect i recomend it alot it shoots 60 meters straight if you know how to use it it is perfect 5 out of 5 recomend it alot

When it first arrived it worked perfectly, after about 300 shots the gun stopped working. But I said no problem it can happen, so i sent the gun back. After a lot of arguing with support i managed to get the gun to them so they can fix it. I even had to pay for shipping myself. But things like this can happen so i didnt mind. When i got it back on march 10th i shot around 50bbs and it worked very good, the next day (march 11) I had to align the sight and i shot around 100 maybe 200 bbs and the gun just stopped working.
With the gun I also ordered the SVD rail which was supposed to fit on the gun. When I tried to put it on the gun it just damaged the exterior and the rail couldnt move anymore.
The replicas build is very good but the internals are bad and talking with support is very hard because their phone number doesnt work and the support mail team responds only once per day.

I bought this gun, It feels perfect, weight is good, looks perfect, i shot 2 magazins with it then it just stop working the gun makes a sound like an electric drill but it wont shot out the bbs, i checked there isnt any bb stucked inside, the problem will be inside the gearbox. Maybe it works perfectly for someone else but not for me, maybe im just not lucky.

Bonne réplique qualitative, acheter avec le pack chargeurs fait large le taff faut juste réduire un peu la puissance et ça passe en sniper/DMR.
Le support de viseur passe très bien sur la réplique également !

Really solid midcaps, awesome price, nice grip. It is really great that a so unique mag is available at almost the same price as a regular ak mag.

I can only recommend this replica, it has really quality externals and internals. The stock wiring is a huge plus, you can easily fit a regular Ak type battery in it. Also a positive thing is that you can easily upgrade because of the V3 gearbox inside, so it is a good dmr base.
If you wan't to get more information make sure to watch my review on youtube:
https://youtu.be/g3pReUFhwYo

Gun shoots great only downside is the cylinder head being exclusive to this. Mag feeds great and gun feels absolute solid. Shipped fast and in great packaging. Out of the box the trigger is snappy selector plate skips full auto easily but I personally only use semi.

Great mags. Cyma makes the best mags. No issues with the mat all.

Great gun out of the box, the barrel woobles a bit, and the piston head rubber is just a bit small so it doesnt compress air well but its fixable with a new rubber seal.

The replica arrived perfect , this count also for the maple leaf inner barrel, the hop up and the low cap mags. The disassembly of the rifle was quite easy to pursue since it doesn't have all that screws and stuff. The rifle is perfect, nothing moves like it shouldn't, the mags feeds perfectly.

Good and solid external,inside is v3 gearbox except cylinder head which is v7(nozzle is not in center). Inside is standard motor with standard cyma gears(which are pretty strong),not good compresion and too much grease. Solid short ak nozzle. For dmr build pretty solid base.standard cyma svd scope mount is compatible

The delivery was fast and products were as described. Fitted well to replica. No problems with feeding. Very good for low price. I can recommend this product to everybody. Would buy again if in need.

Good quality replica. Very fast delivery. Very accurate replica worked very well right out the box. Can be recommended. Hopup is easy to adjust. All the fuctions are easy to use and good quality for replica.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

très bonne réplique ! Reçus un peu en retard mais pas de la faute de taiwangun :D le plus important est que le paquet était super bien protéger et ça c'est un excellent point !

Bref la réplique est très bonne, la batterie et le chargeur fournis avec fonctionne correctement.
Les seuls défauts seraient le chargeur high cap que je n'aime clairement pas (soit hs soit je l'utilise mal XD ) et le grip arrière qui a l'air super fragile et trop léger par rapport au poids de l'avant du fusils.

Voila sinon bonne et très belle réplique

Works good with Force Core FSS airgun. When it new new, must load it as its described manual. Sometimes at first shots has worse feed, because its spring is too strong when its new. Best performance with my 430fps(0,2gBBs) gun is with 0,28g BBs.

Good replicas with a good precision direct out of case.
It looks good on the barrel/handguard and the tringer bloc but a little bit cheap on the cross.
A forgot the plastic battery backing on my first play with it.

One of cymas most sturdy replicas. Offer great range, barley wobbles and is properly air sealed. Only downside is the magasines. They are hard to fit in if you stress reload. It's easy to miss with the magasines thooth. Otherwise I'm very happy with this gun