+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

CM.057S [CYMA]

CYMA  FB3361 | Produit Archive
Cet article n'est pas disponible

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: CYMA
    Code: FB3361
    EAN 5901698403430
    Poids 3715 g
    Modele de réplique Répliques Airsoft SVD / SVU
    Couleur noire
    Matière ABS, aluminium, acier
    Modele chargeur hi-cap
    Mode de tir semi
    Matiere chargeur acier
    Batterie inclue OUI
    Version batterie stick
    Genre batterie NiMH
    Type conneteur batterie small Tamiya
    Type cellule batterie mini
    Version gearbox dedié
    Type roulement acier lisse
    Diametre roulement 7 mm
    Periode garantie 12 mois
    Blowback non
    Ammo .23g, .25g
    Numero de serie OUI
    Longueur 1095 mm
    Capacité chargeur 100 BBs
    Voltage batterie V 8.4V
    Capacité batterie mAh 1200
    Longeur canon interne 590 mm
    Energie sortie projectile 1.34 J
    Vitesse initiale 380 FPS avec billes de 0.20g
    Diamètre canon interne 6.03 mm

  • Opinions

    • - 22.01.2025 A écrit:
      Even after a few months of using this majestic piece, CM.057S is still serving me really good, especially considering I haven't changed any internals at all. The external build quality is absolutely on-par with other high-end replicas I have laid my hands on, in many places even better, especially considering the price. Close to no wobble, the only place wobbling here is the stock and that can be easily fixed(with duct tape for example). The folding stock and a shorter barrel(comparing to regular SVD) is absolutely a life-saver, making it much easier to transport - saving a lot of space in gun cases and car trunks. This makes even storing much easier, as you can just fold it up and place it standing upwards.
      The internals are quite good, of course not the best, but an absolute bargain for the price. With a good enough scope, you can definetely make some great shots even right out of the box. The hop-up adjustment is quite stiff which makes the adjustment more precise which is important considering this is a DMR type rifle.
      If you change some of the internals this rifle can definetely serve you a lifetime, especially if you treat her right.
      Avis d'opinion: 1
    • - 22.10.2024 A écrit:
      This is a great gun for the money. The build is sturdy, there's no wobbling, or looseness. The battery compartment in the handguard is nice and roomy, and the dovetail on the side of the receiver is solid, and allows both AK and SVD style sight mounts. It's very accurate, and the hop up is super easy to adjust, as are the sights if you have standard AK style sight tools or a cleaning kit. This rifle compliments my Soviet era loadout nicely!
      Avis d'opinion: 0
    • - 26.06.2024 A écrit:
      Super happy with the replica, big thumb up for previous review of Filip & Asbjorn, QCS love it, I own earlier version of Cyma SVD and SVU with standard gearbox, installing a stiffer spring was not easy, but with this QCS gearbox, absolutely loving it.
      I had a problem with the hop up dial, it was dull/stiff/blockish, dissemble the unit and sandpaper some surface, works like a charm now :D My recommendation is atleast change the oring of the piston head, original one doesn’t work well (Too thick like previous review said) & get a nozzle(17mm) with oring. The stock is a bit wobbly, put little rubber behind the lock will do the job.
      Big applaud to Cyma, finally making some upgrade parts for SVD line like gearbox, piston, cylinderhead etc.
      Avis d'opinion: 1
    • - 06.01.2024 A écrit:
      A surprisingly cool replica for the money.
      External build quality is nice and adequate, the whole assembly system is well thought out(RS clone) and pleasant to work on.
      The newest internals are pretty nice - QCS(great!), steel rack piston, aluminium piston head and cylinder head. Piston head oring was too thick, porting didn't work and had to replace it for better results. Stock nozzle is without an oring, but had surprisingly good consistency and no power loss compared to a FPS softair replacement.
      Inner barrel is still slightly too long, but it's manageable. Cheekrest is a bit tall for use with iron sights.
      Stock it was shooting ~1.6J out of the box, not 1,8 but it's within norm, I guess.
      Avis d'opinion: 2
    • - 31.07.2023 A écrit:
      The quality of the internals really surprised me! I was ready to upgrade almost everything, but the only thing I will be upgrading in the gearbox is the nozzle (it's plastic and without O-rings). The piston, piston head and cylinder head really surprised me, they look like they're high quality. The piston also had full steel teeth, not just the two steel teeth advertised in the description.
      The gearbox has quick change for the spring, it is the easiest spring change I have ever done in my life. Just pop the top cover off, and the spring guide is right there. Push it a bit, twist it and the spring comes out. It doesn't require much force, but still feels solid, so it won't come out unless you want it to.

      The externals are nice, don't feel too cheap but not top notch either. But for the price you really can't complain too much. You can get at least five of these rifles for the price of the new one from LCT, so this is far better value.

      Overall I think this is probably the best value I have ever gotten from a replica!
      Avis d'opinion: 4
    • - 10.04.2023 A écrit:
      If you want an SVD look no further than the SVD-S as it saves you from having to upgrade the air pressure to a point where you get no negative pull in the 690 MM barrel as the SVD-S has a more comfortable 590 MM barrel. It is also easier to store for people with limited space. Now if you just want a DMR and do not care for the model look for something else. SVD AEG's are hard to upgrade and their parts are spare. You will also obviously have a harder time mounting attachments that you might want. But again if you are looking to 100% buy an SVD AEG go for it its pretty good. Marking it as a 4 star here due to me having issues with the cables of the replica sent to me to the point where it did not shoot on arrival.
      Avis d'opinion: 0
    • - 12.01.2023 A écrit:
      I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.
      Avis d'opinion: -3
      Odpowiedź sklepu:
      Please contact our customer support or technical department. It is possible to return a product and refund. Please complete the complaint form. Regards.
    • - 12.01.2023 A écrit:
      I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.
      Avis d'opinion: -4
      Odpowiedź sklepu:
      Please contact our customer support or technical department. It is possible to return a product and refund. Please complete the complaint form. Regards.
    Ajouter un avis

Répliques de fusils de sniper: Touchez de loin — Vérifiez les autres produits de la série

Le fusil Sniper SVDS (Nom complet en russe Snayperskaya Vintovka Dragunova Skladnaya). Il s'agit d'une version compacte du fusil SVD standard, qui a été conçu au début des années 1990 pour les unités russes aéroportées. Il a été développé avec une crosse métallique tubulaire pliée a droite, qui a été équipée d'une épauliere et d'un repose-joue fixe. L'utilisateur ne peut pas faire feu lorsque la crosse est pliée. Il est livré avec une poignée pistolet et un cache flamme conique. Une version poru le tir nocturne a également été développée, sous la dénomination SVDSN.

Un design solide et ergonomique


Apres de tres bons avis sur le SVD de Cyma, nous sommes heureux de vous présenter le SVDS CM.057S AEG fabriqué par le célebre fabricant chinois Cyma. C'est une réplique tres bien faite qui ressemble presque a l'original. Tous les matériaux utilisés pour construire ce fusil de sniper sont de tres haute qualité. Le fusil est en aluminium et en acier. Le SVD est équipé d'un garde-main en polymere qui dispose d'un compartiment pour batteries, ce fusil AEG est muni d'une crosse pliante en métal, ce qui donne un niveau de polyvalence a ce fusil lui permettant d'etre plus facilement transporté sur le champ de bataille. La partie inférieure et la partie supérieure de la carabine sont en métal, complétées par un numéro de série unique, sur le côté gauche vous pourrez trouver un rail qui vous permettra de fixer une lunette PSO-1ou un montage pour optique.

Un systeme de gearbox dédié

Les pieces internes sont spécialement conçues pour ce modele. Mécanisme de réplique :
  • gearbox spécialement conçue
  • Jeu d'engrenages en acier usiné CNC
  • piston renforcé avec deux dents en acier
  • tete de piston directionnelle renforcée
  • Roulements en acier de 7 mm
  • guide de ressort sur roulement a billes
  • moteur a couple élevé
L'ensemble inclus :

Produits compatibles avec la réplique

Afin de répondre aux attentes de nos clients, nous proposons des pieces de rechange d'usine.
Consultez notre offre.
Spring set for gearbox, Ensemble Engrenages,
Tete de cylindre, Nozzle aluminium,
Cylindre, Ensembel piston et tete de piston
Si vous ne trouvez pas la piece dont vous avez besoin, veuillez contacter notre service apres-vente.

Chaque réplique passe un contrôle initial. Elle est vérifié et chronométré sur le chronographe XCORTECH X3200.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: FB3361 · EAN: 5901698403430 · CM.057S [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport