+48 123626134 shop@taiwangun.com
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription

CM.057C [CYMA]

CYMA | Produit Archive
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Poids: 3500 g
    Couleur: noire
    Matière: aluminium, polymere, acier
    Mode de tir: auto, semi
    Modele chargeur: hi-cap
    Matiere chargeur: acier
    Batterie inclue: NON
    Version gearbox: dedié
    Type roulement: acier lisse
    Diametre roulement: 7 mm
    Periode garantie: 12 mois
    Hop up: reglable
    EAN: 5901698489816
    Ammo: .28g, .30g
    Numero de serie: OUI
    Longueur: 920 mm
    Capacité chargeur: 200 BBs
    Longeur canon interne: 650 mm
    Energie sortie projectile: 1.64 J
    Vitesse initiale: 420 FPS avec billes de 0.20g
    Diamètre canon interne: 6.03 mm
    Modele de réplique: Répliques Airsoft SVD / SVU
    Fabricants: CYMA
    Code: FB4031

  • Opinions

    • - 26.11.2024 A écrit:
      la réplique est bien mais j'ai u la surprise d'avoir des câbles abimer et écraser dans le puits du chargeur car mal fixer en interne, le sélecteur de tir ne fonction pas bien 1 coup sur 2 le tir passe en rafale
      annoncer a 417 fps a la 0.20 je la teste et je me retrouve a 360 fps

      bref déçu
      Avis d'opinion: 0
      Odpowiedź sklepu:
      Thank you very much for sharing your opinion about the protective mask you purchased.

      We are extremely sorry that the purchased replica revealed minor imperfections.
      We invite you to contact our service department, we will help to remove any weaknesses.
    • - 20.10.2023 A écrit:
      Esthétique pas mâle mais la performance pas au top
      Avis d'opinion: 0
    • - 28.03.2025 A écrit:
      Semplicemente fantastico, esattamente come speravo. Ho chiesto di spedirmelo con una potenza bassa, 310 fp, ed è arrivato esattamente come richiesto, un filo sotto 1j, come da legge italiana. Spedizione velocissima, imballaggio perfetti, soddisfatto al 100%. Consigliato
      Avis d'opinion: 0
    • - 19.11.2024 A écrit:
      The CYMA SVU is a very unique base to build a DMR from. The rifle itself, without the suppressor, is about as long as a mk18 but with an inner barrel almost double the length. There are a few quirks to this replica that you should know of first:

      The butt pad angle is atrocious. The gun will slip down from your shoulder more often than not. Thankfully there are 3d printed remedies to this.

      The dust cover is a little noisy. It rattles slightly when you move the replica.

      The inner barrel extends into the (foam filled) supressor. You will need to undo a small allen head set screw in the supressor to unscrew it off.

      The gearbox has 4 gears and parts compatibility is strange. If you want to HPA it like I did, you need a F2 with an offset nozzle. They make a cyma spec SVD nozzle just for this gun. It will also require some soldering knowledge.

      The top rail is held on by a small plastic retainer. I dont know why they decided to do it this way, but if you have heavy optics on the top rail it will wear down that little retainer. It would be a good idea to make something that attaches the top rail to the secured bottom rail.

      Over all, this replica does need some DIY ability to get the most out of it.
      Avis d'opinion: 1
    • - 01.09.2024 A écrit:
      What's in the box: you'll receive the replica, a high cap magazine, an extra spring for downgrading the FPS, a 8.4 NiHM battery and charger.
      The material used feel nice and of good quality. There are no wobbles between parts. The metal is smooth and sturdy.
      The replica shoots a bit slow with the battery that it comes with, but it's not a big obstacles to overcome (you'll need a stronger battery and a MOSFET). the AK stick type batteries will fit nicely.
      I suggest getting the metal midcaps because they sit much better and fees a bit better. The plastic ones are a bit bigger and sometimes need a tap from underneath to sit properly.
      Upgradability wise you will have limited options as it is a special SVD gearbox with 4 gears and a mechanical connection to the front trigger. I would suggest getting a new nozzle with o rings inside as the stock nozzle lacks them. You can change the barrel to a 509mm length because the stock barrel is a bit too long to get optimal range. The hop up is great tho. If you want to install a Mosfet, you'll need to get an inline MOSFET because the optical mosfets don't fit inside.
      All in all, its a great replica with potential that guarantees all the players will want to see it closer.
      Avis d'opinion: 2
    • - 23.12.2023 A écrit:
      The gun is realistic looking, pretty much an exact replica, weight and everything and sure is sexy, that's why it gets up to 2 stars.
      There's a myriad of issues with it out of the box.
      For starters, even the detailed cyma pdf sent by taiwangun, even that lacks any info on this specific variant, so disassembly/assembly is pain.
      The suppressor, which is removable and is a standard 14mm thread, houses the extra part of the inner barrel, which has no o rings at the end, making it shoot way off to the side.
      The hop dial is basically there for show, no noticeable change no matter how far it is to one end or the other. Due to the shitty accuracy, it's almost like the dial is not changing upward/downward, but sideways.
      That brings us to range. For a DMR this has ass range. Think about like 25-30 meters tops.
      Upgrade-wise, lmk if someone manages to put a mosfet in this thing. The m-lok rails are there so it can be kitted out relatively easily, but that doesn't balance out the shortcomings.
      Avis d'opinion: 5
      Odpowiedź sklepu:
      Thank you for sharing your feedback with us. We appreciate your positive comments on the realistic appearance of the gun. However, we're sorry to hear about the issues you've encountered with its performance.
      Regarding the issues with the suppressor affecting accuracy and the ineffective hop-up adjustment, we're disappointed to hear about these issues. We take product quality seriously and will investigate these concerns to identify possible improvements.
      Your feedback is valuable to us, and we apologize for any inconvenience you've experienced. If you have further details or suggestions, feel free to contact our customer support.
    • - 19.12.2022 A écrit:
      good rifle a bit back heavy an the stock is a bit defrint
      to use fels like it want to slide down a lot
      need at least some internel opgreades ......................................................................................................
      Avis d'opinion: -2
    • - 07.04.2022 A écrit:
      Great rifle, shoots pretty accurate out of the box but the inner barrel length is a bit too long for it to be accurate. definitely some modding required for it to classify as a DMR. wish it came with a full steel tooth piston, and the pretty bad battery space. Another issue i had with the rifle is the top cover that just does not click into place after 5-10 times of removing it, because the clip that holds the top cover in place is made of cheap plastic. if this was metal instead it would last years but for me it lasted about a month
      Avis d'opinion: 0
    • - 14.02.2021 A écrit:
      Quite disappointed with this one actualy. From the outside its almost flawless. Nice lines and structure. Weights like a truck jet is smaller in real life than in pictures. But when i got to fire it.... It shoots 2 bbs or jams, then when it fires i cant hit anything beyond 30m range. The wiring is a mess, its jammed in handguard, magazine hits it when you insert mag, and - wire was almost broken near the engine. For such a high price i think its unacceptable by cyma.
      Avantages:
      Very good looking, you will get thumbs up and questions all day bout it. Very compact. Simply best one in terms of base for DMR tuning i think, because its build like a tank and none of internals can move freely, everything is tight and adjustable. Very good hop up unit (with minor mods)
      Inconvénients:
      I think cyma wasted all the money on outside look and materials, and ditched the internals. (when are they going to sell just a shell so you can install normal stuff and not overpay? ) Flimsy reciever cover (can be fixed) and narrow battery space (i managed to squeeze 11.1 li ion 2600 from ipower since original 8.4 couldnt fire at 450 fps spring, thou had to file inner barrel a bit) Tuning a bit rough because all parts are proprietary
      Avis d'opinion: 4
    Ajouter un avis

Fusils DMR précis — Vérifiez les autres produits de la série



Apres de tres bons avis sur la version précédente du SVD, CYMA présente la prochaine réplique de ce fusil de sniper. Le fusil emblématique possede une finition de haute qualité est une position qui plaira a de nombreux joueurs d'airsoft. La réplique est faite de matériaux de haute qualité tels que l'aluminium, le polymere et l'acier. Pieces en acier: Top cover, levier de sécurité, pontet et chargeur. Les pieces en aluminium sont: cache-flamme, canon extérieur, bloc gaz, lower, goupilles, extension du lower, rail de montage de la lunette Poignée pistolet et la crosse sont en polymere.

Les pieces internes sont spécialement conçues pour ce modele.
Mécanisme de réplique:
  • Gearbox spécialement conçue
  • Jeu d'engrenages en acier usiné CNC
  • Piston renforcé avec deux dents en acier
  • Tete de piston directionnelle renforcée
  • Roulements en acier de 7 mm
  • Guide ressort sur roulement a billes
L'ensemble inclus:Afin de répondre aux attentes de nos clients, nous proposons des pieces de rechange d'usine.
Consultez notre offre.
Spring set for gearbox, Ensemble Engrenages,
Tete de cylindre, Nozzle aluminium,
Cylindre, Ensembel piston et tete de piston
Si vous ne trouvez pas la piece dont vous avez besoin, veuillez contacter notre service apres-vente.

REMARQUE! Nous pouvons le downgrader a 330 fps (1 Joule) dans le prix. Écrivez simplement a ce sujet en commentaires de commande.

Chaque réplique passe une vérification initiale. Les mesures sont effectué sur un chronographe XCORTECH X3200.

La batterie recommandée avec une tension de sécurité la plus élevée pour cette réplique est de -11,1 V.Si vous décidez de réduire la puissance, assurez-vous de ne pas utiliser de batteries avec une tension trop élevée - une 9,6V NiMH est recommandé, et dans le cas de Li-Po / Li-Ion - 7,4V Sinon, la réplique peut etre endommagée, ce qui ne sera pas couvert par une réparation sous garantie!
N'oubliez pas que la garantie ne couvre que les répliques pour lesquelles le ressort n'a pas été remplacé par un plus puissant et aucune batterie avec une tension supérieure a celle recommandée n'a été utilisée.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: FB4031 · EAN: 5901698489816 · CM.057C [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · shop@taiwangun.com
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via shop@taiwangun.com
* Prix avec la TVA, sans les couts de transport