[Ensemble] WE06 submachine gun replica [WELL PRO] + Batterie Li-Po 1200mAh 11,1V 20C - Deans [IPower] + Chargeur de batterie V3+ pour batteries LiP...

Jouable en sortie de boite, elle tape à 350fps à la 0,20g. Avec un changement du ressort, en CQB c'est une merveille. Le joint d'origine lève de la 0,32g sans problème. Aucun jeu dans la réplique même si c'est du polymère.

Franchement bluffé part le rapport qualité prix. La réplique est bien fini avec des marquages réaliste, MOSFET de protection et une super cadence, quand au prix il est délirant au vu de la qualité.

J’en attendez peu au final je suis impressionné, en main la réplique mais absolument pas jouet, bien au contraire, mis à part le chargeur, absolument rien à du jeu, même la crosse, absolument aucun jeu. 2kg4-5 à peu près sur la balance, très correcte, ni trop ni pas assez c’est parfait. Niveau réactivité à la LiPo 7.4v c’est très bien également. Rien à dire de négatif.

Une réplique vraiment très intéressante et abordable. Pour le prix elle a une cadence très élevée et une très bonne réactivité sans avoir d'électronique poussée intégrée. Elle est légère maniable et très agréable à prendre en main, parfait pour du cqb mais aussi utilisable en forêt. Le système de changement de ressort rapide est vraiment pratique. Bref n'hésitez pas foncez

Réplique en nylon de relativement bonne qualité.
Sortie de boîte canon et joint hop-up nettoyés, sérieux problème de groupement, il n’y a pas deux billes qui partent au même endroit, réplique à fiabiliser donc.
340 FPS de moyenne en 0,20 assez stable.
À part, il y a un macro mosfet historique pour protéger contre les surtensions uniquement.

Réplique de bonne qualité, je l'ai acheté pour son poids très faible la qualité d'assemblage est très bonne l'interne d'origine est très correcte pour le premier prix d'origine à la 11.1 environ 20 coup seconde.
Il y a un guide ressort sur roulement l'étanchéité d'origine et très bonne chose rare le nozzle d'origine à un joint!
Les dents du piston sont full métal.
La tête de piston est pas ouf mais bon vu le prix on peut rien dire.
Par contre si vous faites un up grade avec remplacement de la tête de cylindre il faudra prévoir un nouveau nozzle car il ne rentre pas sur les têtes de cylindre du marché.
Le joint hop-up d'origine est vraiment de mauvaise qualité il faut prévoir de le remplacer.
Je ne peux pas juger le canon car remplacer en sortie de boîte.
J'ai pris se modèle car je voulait une réplique légère je prévoyait un up-grade en sortie de boîte vu que j'avais les pièces chez moi c'est pour ça que je suis parti sur la version de base.
Un ami a la version en dsg franchement vu la différence de prix je vous la conseille niveau réactivité c'est le jour et la nuit! en plus il y a un mosfet programmable d'origine.
Les chargeurs d'origine sont de très bonne qualité il nourrissent de la 0.30 sans problèmes et pas chère .

Très bonne batterie.
Faible encombrement.
Parfaite pour les emplacements étroits limités.
Elle est capable de tenir une journée complète avec de nombreux échanges.
Un excellent rapport qualité/prix.

Réplique de bonne qualité au niveau de l'intérieur un hop-up un peut sur a régler si on a des gros doigts et attention à la fermeture de la cross certaines partie s'abîme rapidement si on y fait pas attention mais globalement la réplique garde un bon rapport qualité prix elle est compacte, légere , et convient très bien pour tout type de terrain

La réplique arrive dans une boîte très sobre.
L’externe donne une sensation de qualité et bien finis, rien a rajouter.
L’interne est très correct et surtout la pneumatique est étanche.
Seul point noir, il est indiqué des bearings mais ce sont simplement des bushings.
Il y a un petit mosfet externe d’origine mais il y a la possibilité d’installer un interne type titan ou t238.

Une réplique aussi bonne pour un débutant qu’un joueur confirmé

Ce chargeur fait le minimum mais le fait bien. La diode de gauche est verte quand le chargeur est branché sur le secteur, celle de droite est rouge quand la batterie est en charge et devient verte quand c'est terminé. Rien de plus, pas d'écran, pas d'indication du pourcentage de charge de la batterie mais vu le prix il ne faut pas s'attendre à plus. À voir dans le temps.

really pretty very light 2.200KG max with BBs,magazine and scope latest generation of AKs with their M4 type selector I really like GO IT BUY IT!! It looks like the real PPK-20, it's really a shame that the selector markings aren't in white, but a quick touch of a felt-tip pen and that's it. the top cover moves with a heavy scope and finally for the price we have a quick spring change! thanks you

Cordially
Shawn

Chargeur compact et rapide.possibilité de brancher deux batteries en même temps. Petit prix. Satisfait de mon achat

Très bon produit de très bonne qualité pour le prix je suis très satisfait de cette achat que je recommande fortement, possibilité de recharger plusieurs types de batterie LiPO/Li-ion . La qualité du produit par rapport aux prix sans parler de la livraison rapide et le produit très bien emballé , je recommande fortement.

Pas de problème pour le moment, conventionnel, semble charger assez rapidement les batteries. Testé sur du 8,4v et 11,1v. n’oubliez pas d’acheter une petite pochette de protection pour batterie. Le câble secteur est fourni avec

Correspond au produit vendu sur le site

la batterie est grande, solide et son cablage est de bonne qualité.
je vous conseille d'acheter un chargeur de batterie en meme temps qu'elle car elle sont pratiquement vide a l'arrivée.

je ne peut rien dire sur le effectivité car je n'ai pas encore pu les utilisé sur une session de tir sur cible ou en partie d'airsoft

Je recommande cette batterie, j’en ai acheté deux. Franchement c’est le top du top. Elle m’a tenu une journée complète, et moi qui pensais en avoir besoin de deux par jour !

Et franchement niveau qualité prix je pense y’a pas mieux

Très bonne batterie, elle fait le travail et fonctionne parfaitement.
Même en la comparant à d'autre marque connu, celle-ci n'a rien à leur envier et fonctionne toujours comme au premier jour après 1 an d'utilisation

Chargeur compact qui me permet de recharger ma 7.4 en Deans, les leds sont super utiles, et la charge est rapide. Malgré la grande capacité de ma batterie (2200mah), il a fallu 1-2h pour la recharger entièrement, je recommande chaudement.

Good bbs , and nice bag . You don’t have to transfer the bbs into a bottle so this is very handy . I would recommend this product so don’t hesitate to get them you won’t be disappointed . The only downside is the bbs aren’t bio .

Le manuel d'utilisation est clair, ce produit fonctionne parfaitement bien et est tout à fait silencieux. Il permet de charger des lipo ou des life de tout type et s'arrête de changer quand ce n'est plus nécessaire.

This battery shape fit AKs (Altough I tried on CYMA, I think on other brands aswell), they drop in without issues and plenty of clearance in the mock gas tube and sightblock.
This one provides enough to make the replica run fast and smooth.
I would've preferred a longer variant with more amps, just get a couple more and fit them in a LiPO pouch.

Well, what can I say about this charger?
It's perfect for any batteries you have, althought for specific batteries voltage (check the techical data or lower in description). And to charger my battery, it tooked like 1.30 or 2 hours

This charger is simple to use and works perfectly. The charging indicators are clear, and it charges my batteries safely and efficiently every time. It's compact enough to take with me to games and gives me confidence that my batteries are being charged correctly. Excellent product for anyone looking for a dependable charger.

Does the job it is designed to do.
Light indicators are a great way to track if the battery is full.
Cord is a bit short.
I recommend buying a charging bag with a charger.
Design is not great but you are probably not buying this for its design.

Not much to be said here only that it charges. the led to let you know its fully charged is nice. The charger is made for EU wall sockets so if you live in a country with different sockets be prepared to buy an adapter which is only €2

Claims all my batteries are charged despite them being one being 22%, another 70% and only one at 86%.
Maybe the one I have is defective, but it has charged the one that is at 22% to a full state multiple times in the past

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

Erős akkumulátor, feltöltés után majdnem egy egésznapos játékot kibírt nekem. De nyílván ez attól is függ hogy milyen játékmódot játszik az ember és hogy milyen gyakran lő. Árához képest nagyon erős és jó akkumulátor

Pretty solid replica. Shoots very well with .30 out of the box. Does shoot a bit harder than expected but I believe when the spring wears in itll be below 1.2j.

Main points I have against the replica is that it locks up on semi every now and then (probably my fault for spamming the trigger tho). The replica is plastic and the stock does not seem like a replacable part. At least I cannot find the replacements for it.

Very skirmishable out of the box and nice looking replica :)

Really glad I got this charger! It makes charging my LiPo batteries super simple and worry-free. The lights let me know exactly when the battery is ready to go, and it charges pretty fast too. A must-have tool to keep your gun running all day!

I’ve been running these 0.23g PROSLICK BBs as a kind of “middle ground” ammo in a few different AEG setups and they’ve honestly been pretty solid overall. Feeding has been smooth in all my mid-cap mags so far, no jams or weird inconsistencies, even during faster paced CQB games. What I like about the 0.23g weight is that it sits nicely between speed and stability — a bit more stable than 0.20s, but still snappy enough for close and mid-range engagement.

In terms of flight, they’re surprisingly consistent for the price. I didn’t notice any obvious flyers in normal outdoor conditions, and hop-up response felt predictable once dialed in. The bag packaging is also practical, easy to pour into a speedloader without spilling everywhere, which is a small but useful detail on game days.

For casual skirmishes or as a budget-friendly primary BB, they do the job really well. I wouldn’t call them “premium competition grade”, but for regular gameplay they’re definitely reliable and easy to recommend.

Chargers came with a solid cardboard box and with a power cord. Very easy to use and charges batteries very fast.
Used it 2 times so far, I’m okay with the product.
Would recommend for any beginner.
Only downside is that it’s not capable of taking the batteries to “storage” mode. Other than that it’s good!

An essential tool if you are switching to Li-Po batteries. It's very simple to use: just plug it in and wait for the LEDs to turn green. It feels safe, doesn't overheat, and the compact size makes it easy to throw in your gear bag.

The iPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a compact and reliable power source for airsoft AEG replicas. Designed as a 3S LiPo pack, it provides strong and consistent voltage output, which results in improved trigger response and a faster rate of fire compared to standard NiMH batteries.

In use, the 1200mAh capacity offers a good balance between size and runtime, typically lasting for a full skirmish depending on the rifle’s setup and firing style. Its slim stick design makes it ideal for tight battery compartments such as AK dust covers or buffer tubes in M4-style replicas.

The 20C discharge rate ensures stable current delivery, which helps maintain performance even during rapid firing. The pre-installed Deans (T-Plug) connector is also a strong advantage, as it reduces resistance and improves electrical efficiency compared to older connector types.

Overall, this iPower battery is a solid, affordable choice for players looking to upgrade to LiPo performance. It is especially suitable for intermediate users who want better responsiveness without sacrificing compatibility or reliability in the field.

Great and reliable battery that performs consistently and holds charge well during extended use. It fits AK replicas quite nicely and is actually more compact than expected, making installation easier in most setups. Compatible with brands like LCT, CYMA, and E&L, where it sits securely without modification. However, some gas tubes can interfere with proper placement. In particular, certain 3D-printed handguards tend to have a smaller gas block diameter, which can prevent the battery from fitting through. With standard handguards, though, it works very well and remains a dependable choice overall.

A really nice battery. First perfectly in my LCT AK 105. I could use it for a whole day without charge. When you use a lot of full auto it will probably not last a whole day tho. No bad things to say about this battery.

It holds energy well and releases it. It fits perfectly into the narrow battery holder of the Arctarus AK12. I also tested it on an Arctarus M4 CQB and it fits perfectly into the buttstock.Unlike other accumulators, there were no problems here during play because arctarus replicas are sometimes sensitive to the accumulator.

Its a good battery for the price. I have another type of battery from this manufacturer and it does a very good job. This is powerful and its safe. You have that new type of T connector on in, it goes good with specna replicas.

This thing is amazing. .95j out the box, accurate fast and fairly sturdy for a plastic replica it feels very nice in the hand. Did a little project and 3d printed the long zenitco style foregrip, new longer barrel, AK LONG type nozzle, type 0 cylinder and new cylinder head. This baby now shoots 1.3j accurate to probably around 50-60m. Insane lil thing for the money

The charger make what he can! I used twice until when i buy that. I tink this is a good product for this price! The charging time is common. I recommend it to beginner players who dont want to invest a lot of money in the game at the beginning.

I have a Cyma AK but i wanted an AK that was shorter and lighter. I found this replica and gave it a try.

The replica itself is pretty good, i wasn't expecting much when i ordered it but it has genuinely surprised me.

It didn't have the 20 BBs P/S i saw on the review page but it still shot around 14 P/S (Used 11.1V Lipo).
The build quality is pretty good for something that is made from mostly polymer.

The included mags however aren't my cup of tea. 80bb is not enough and you will be reloading constantly. But this issue can be fixed by taking off the mag-well and placing the mag catch further back. doing this allows you to use normal AK mags, cyma mags feed perfectly in this.

I've used this replica since it came out and i can recommend it. especially for the price.

Výborné spracovanie odolný materiál , dobre sedia zásobníky v šachte žiadne vrzganie, rýchle dodanie, veľmi presná zbraň z krabice, v prípade upgradu nutne diely na mieru nakoľko je mechabox kratší o 3 zuby inak je to úplne zhodne

For it's price, it's really worth it. Very solid construction and has some weight even if it's hard plastic, and you can always upgrade it to your needs. I was surprised by the mag release and the fire selector, because they are really easy and smooth to operate. Also, it has a threaded barrel.The only drawback is that it has no sling mounting points whatsoever. Oh and if you are looking for a magazine pouch, MP5 mags have almost the same dimensions.

The IPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a great choice for airsoft. It delivers solid performance, providing reliable power for extended gameplay. Compact, durable, and easy to install. Highly recommended!

perfect battery for ak use, fit with no problems and gives a new life to your replica. good quality connectors and eletrican wires. i got this for backup and ended up using it as a primary since i feel its faster to respond.

Perfect! I ordered this and tried them out, and they fly perfectly. They work really well with my CM.515. The 3000 rounds will surely last me a long time, as i mostly use semi-auto for skirmishes. The lid also makes it perfect for sealing or pouring them into a speed loader, therefore making it comfortable to hold anywhere. I recommend these.

It's a really good battery as a main or a back-up due to it's really slim design. It lasts a good bit and it's perfect for AK type replicas. I'll probably end up buying another one in the future just to keep in a bag when I'm in a long match. Buy 'em, they're great!

excellent bbs for a perfect game

they are very durable even in the most powerful airguns
very smooth and accurate shots with these bbs in perfect weight

also the price is quite good considering the quality and the packaging contains quite a lot so you won't run out of ammo easily bravo

This is the second one (already have the DSG versione)
Price/performance absolutely amazing, targhet at 40 metre are no problem, and amazing reactivity.
very light, you can easily fit in the backpack as back up and not feel it.
Grat product

Feels solid and shoots well for the price. Semi did not work with 7.4 lipo below 7.7 volt, full auto worked though for some reason.
Perhaps the MOSFET is calculated for 11.1 volt, but with a fully charged 7.4 the problem was gone. I'll just have to see for how long the two 7.4 volt lipos work before the problem returns. Doesnt affect my score cause I paid 128 euros and got a free extra mag.
I dont feel like I need any compensation for the minor issue but wanted to point it out in case its a dealbreaker for any future customer.
Perhaps its a safety thing to protect the battery.

super accessory, I enjoy playing with it, the weapon it comes with is very accurate and strong, so far I am completely satisfied. The package arrived in perfect condition, within a very short time. I will order from here again, I am very satisfied.

Cqb beast in a small lightweight package on a budget.
A nice rate of fire at full auto and a responsive trigger on semi. Didn't miss a beat last game. Make sure to buy a matching battery. My brick style lipo was a bit tight.

Ez egy nagyon jó kis töltö teszi a dolgát. Aránylag gyorsan is tölt. Jó a minősége söt nem is kerül sok pénzbe ez a töltö! én azt mondom ha bárkinek kell valami olcsó és jó akkor ezt a tőltöt ajánlom. Én teljesen meg vagyok vele elégedve nekem nincs vele semmi gondom teszi azt amit kel neki. Csak ajánlani tudom!

It's the only battery I use for my Arcturus AT-AK05. It fits perfectly and has the best shape for the capacity for AK style airsoft replicas.
Careful when using 11.1V as it can damage weaker trigger internals. If you have a mosfet though, this is the way to go, makes the replica much snappier

I am playing with WE06 for more than 4 months.
This is the ideal AEG for CQB use. Super light weight but solid body. No problem at all.

Good rate of fire from the box (I bought standart version, not high speed) and very reliable and cheap magazines.

Internals are OK for this price. I changed cylinder and piston heads to aluminium to make it more reliable. The rest of internals look good.

I enjoy it, definetely recommend

For the price I guess it's okay. Shoots fine. On the 2nd time out, the catch for the folding stock broke off. It wasn't from a fall or drop, it just broke while playing. I don't mind polymer, but this is one part that should be metal. It's not a part that can be replaced. Guess it's now a large pistol.

Works perfectly. Very simple charger - you just connect the battery and it charges.

Be mindful to have the bottom switch in the proper position for charging your battery!

I also advise getting a proper measurement device to check the status of your batteries. You can do that with a multimeter, but a dedicated device is about 5 Euros so do not cheap out on it. The charger does NOT show you any info!

This 11.1v battery is totaly fine for price i played 2 games with it one in akm and one in rpk style replica. Both times it held up great didnt overheat or drop down in performance. Would reccommend if you need slim battery.

Good fits my ak 12 well and its powerfull and can hold some power lasts quite a while.

I recommend getting at least 2 products for longer games. For milsim i recommend getting more

I was tempted to buy a Gens Ace 1400 mA/25C but I bought 2 of this instead
for almost the same price. Seems to be a decent quality, well made and properly balanced. Fits very well under AK cover receiver. I can't say anything yet about reliability in time.

Works as intended, fast charges my batteries, never had any trouble at least for now. Build quality is not too high but that is to be expected for a product that costs less than 15 euros. All in all I consider this a good purchase

Ho acquistato il Wellpro 06 x la sua compattezza e versatilità. Provato in game risulta leggero e maneggevole. Componenti solidi e ben curati, nessuno rumore o inconveniente. Molto soddisfatto dell'acquisto. Spedizione rapida e senza problemi. Grazie a tutto lo staff Taiwangun.

I am a huge fan of ak's and this gun was love at first sight, I bough the basic version because I like to upgrade guns myself but there was hardly any need, for such a cheap gun it punches above it's class right out of the box. It is short stroked so it cycles fast, I could only lift up till 0.28g in a good way. I pimped the hell out of this gun and it is a thing of beauty, it is compatable with v3 parts except the spring guide and the hop chamber, had no problems with any other part, to fit a perun you will need to cut a small spring guide other than that it was easy. It has some amazing features like the internal selector plate with a spring and a ball bearing making a satisfying cliking sound when you change the fire selector, a thing of wonder why it was not done yet. The gun is simple to take apart but very complete. I would buy again. Sometimes I feel kinda of sorry I did not bought both of them on the xmas special, I also feel that I put a ton of extra parts on it but it did not come any better than the upgraded one. Just buy it and scare people with it :)

Pros:
-It has a T connector out of the box
-looks like the New ppk20 russian smg
-Lightweight
-in the box you receive a midcap mag wich is very good
-it can handle a 11.1v battery wich gives it an insane rate of fire out of the box
-its as cheap as it can be. (Not in a bad way)
-its plastic but in a good way its polymer mostly but the important parts like the barrel the gas tube the fire selector mock bolt and the folding stock part wich is very good because its not plastic there so you can close the stock without worriing about the latch brakes
-it looks fkn cool

Cons:
Sadly it doesnt have any kind of compatible metal handguards like the real one soo its realistic

I think this gun for the price is too good. For that much money you can buy a standard m4 in cheap plastick and low quality internals.
Its unique its a new russian smol ak everithing is awesome about it.

After figuring out how to set in the battery she worked like a dream and worth way more than I’d paid for it by a long shot. High rate of fire, semi decent range but if you swap for a tighter and longer inner barrel it’ll be way better than you started still.

Very good gun out of the box . I have a very good experience for the first time in my first game with it shoots very smooth . It has a lot of power and it's durable . It s a value for money gun but the material it's not perfect . I've seen replicas cheaper with better quality but overall a perfect cab gun

One of the best battery in the market. Fit all my Arcturus and E&L AK, my Arcturus Ak12K has little space for the battery and it fits perfectly. I've used it for a whole day of gaming and it lasted the whole time. Of course, if you spray the BB like Rambo, you should have a spare battery with you. If you want a good battery at a good price, choose this one.

Works great, fits the small battery compartment of the CM.103.

I used more ipower batteries in the past, and never had any problems with them. I easily recommend to anyone. Best value for proce ratio.

it is a really good charger it charges the batteries really fast and it doesn't destroy them, i like it very much, it is cheap and good of course you have to watch it and don't overcharge the batteries but that's the case with all of the others. I recommend it because it is cheap and reliable

I got what I expected, a cheap plastic charger.
It is very light and hollow inside.
It's not terrible but it's not good charger.
This is a cheap charger and I got what I expected. The charger is made of plastic and is hollow. I recommend it to people who don't want to use the battery for games.

These bb's are INCREDIBLEY handy to have. They are way cheaper than traditional bb's that you buy and the nozzle that is attached to the bag is SOOO good. You can save a lot of bb's because the nozzle doesn't allow them to spill everywhere. 10/10 would recommend

Great and cheap! So fricking fast! I was so surprised :D It only took like 1 hour? idk, but it was fast. Greatly recommend this product! And of course Taiwan gun ships very fast. only took 2 days :) very happy, thank you Taiwan gun.

It does fit my arcturus ak but with very little room left. Gives me enough juice to play all day. It lasts a full day of 8 hours with 1000 rounds shot mainly semy on 1.2j. The T plug fits snug and the battery doesn' swell that much. I would recommend

Fits good for Ak12pe.

The first impression out of the box is that it is a cheap product. And it really is.
The charger is made out of the cheap plastic, it's very light, hollow, and something rattles inside the case.

I wouldn't mind any of the previously mentioned stuff if it worked fine, but for me, it doesn't. Charging was fine for the first few times, but after that the same thing happened as mentioned in the previous review. You plug in the battery, and it never charges completely, the LED is red all the time. I tried it with three different batteries, and it's the same case with all three (another charger charges them without any problem).

As with other cheap Chinese products, the price is very good, and it might work just fine for you, but there is a real chance it will not, and I don't think it's worth a risk. Better quality chargers are available for not much higher price.

Stoped working after first two times. ;( Also hapened to my friend.
Maybe tehere is some factory defect, i was charging, usual lipo stick bateries.
Indiciator shows empty all the time.
Hope to hawe some answer from you guys, also wrote at e mail.

Mine was broken, it looks like one of the charging wires broke and wont charge. On the first try in my replica it shot like 3 auto bursts and then stopped. I know people with the same battery brand and they are happy, not my case

Fits in my Arcturus AT-AK04 nicely. Lasts a long time, i have 2 but have never needed to use a spare even in games lasting 4+ hours. Not much more to say, but need to fill the minimal character requirement.

This item is simply amazing, I was very happy when I bought it. I thought it wouldn't fit or I wouldn't like it, but everything turned out very well. I really regret not buying it earlier. Now I always like this thing and I will never leave it. At this price, it is very, very worth buying, believe me, it will really fit you and you will like it. I highly recommend you buy it, and buy it as early as possible before others buy it, because it won't be available. Buy as early as possible, because mine and your last airsoft game will be simply the best, believe me!!!

Truly a great battery charger for the price! But expect some "cons"...

The charger came in a generic carton box, the unboxing experience was really basic, but for the price it's not an issue. Included in the box was the charger, the 2 pin EU cable and instructions.

The Charger itself is made out of what seems to be an injection molded black satinated ABS plastic shell with on top 2 output LEDs, air vents for heat dissipation and a vynil sticker with the name of the charger. On the front side there are 2 ports, a three pin and a four pin one, on the back side there's the AC 110-240V cable port. On the back of the device there are 4 silicon rubber feet, the VERY IMPORTANT MICRO SWITCH that is used to select which type of battery you're charging and a vynil sticker with the informations of the device. The cable is decent quality too.

The IPOWER V3+ Battery Charger has 800mAh max charge current, meaning the microcontroller will manage the charging of the battery cells accordingly to their current level of charge. It will then deliver the right amount of current ranging from a few mAh to a maximum of 800 mAh. This means more battery life but also that the true average charging current is less than 800mAh, just keep that in mind! The charger supports 2/3 cell batteries and can charge only one at time.

The power LED is green and always stays on when the device is connected to AC. The status LED on the other hand has different color codes (Red, Red blinking and Green), meaning the microcontroller is somewhat enough intelligent to detect malfunctions and stop charging to prevent damage and tell you what's going on. In general the charger is not too noisy and the heat dissipation is enough.

But then, where are all the cons? For the price that's surely a bargain, but still...

The charger is poorly built. The plastic shell is decent quality but the charger really feels "light and empty" with very small internal support. That said, if you plan to take it with you it's surely better if you protect it or it could easily break.

Another thing that makes me "wonder why" is that the switch is under the device, meaning you can't easily see it. If it accidentally changes position it could be very painful for your battery... Be careful and always double-check it before charging!

In addition, if lightly shaked my unit sometimes emits a clicky noise (like there's something free moving inside) and have a misplaced rubber foot that is surely going to detach soon. Not to talk about the fact that the cable is just slightly bigger thant the port, so to attach it you really have to push or it won't go. But still, after pushinf it with some force the device managed to charge my battery in just a few hours without any problems!

Overall this truly is a 4 star charger. But that doesn't mean you shouldn't get it! For the price I don't think you could expect or want more, for some people in fact the important thing is just the internal hardware... And it seems like that the IPOWER V3+ decided to put all the budget for the electronics inside, which could be all you need if you want to buy a cheap charger that gets the job done and has a good microcontroller. Tho i wouldn't reccomend it too much if you travel much! Anyway i'm very happy with it as i am the first kind of person ;)

Good product in case of price and quality. I can't say anything special or critical. The batteries are charging properly, there are no breakdowns or problems. If you are saving money and need a stable and efficient lipo battery charger, then you can buy this product without doubts. Moreover, the Taiwangun shop has not yet disappointed with its products and this charger is suitable for both beginners and advanced players with a limited budget.

I've only used the charger once and it seemed to work fine, but the cable it came with did not fit the charger, meaning that the plastic was too thick. I fortunately had the necessary cable, but I am quite disappointed that the cable provided did not work.

V3+ CHARGER FOR LIPO/LIFE 2S/3S
A good balanced charger. Charges the battery in about an hour and has a good light indication when charging and reaching full battery capacity. I use to charge a battery type BATTERY LI-PO 1300MAH 7.4V 20/40C

It fits tightly under the cover of an Arcturus PP-19. It's a bit difficult until you bend your wires to make everything fit properly, but overall it's worth it since there's no way this battery will not last you an entire day at the field.

These airsoft BB's are extremely well made they are polished seamless and perfect. The performance is unparalleled. They were well packaged and shipped very quickly. Taiwan gun continues to impress me with their products. Make Taiwan gun your first decision when shopping for airsoft replicas gear and accessories they are the best in the business.

Ein gutes ladegerät um den preis ist preisleistung top. Hab mir gleich paar akkus auch bestellt damit ich alles auf Lager hab. Nach einigen stunden laden wir es bisschen warm aber werden andere Ladegeräte auch villt bin ich da zu sensibel.

Perfect price-quality ratio. Easy to use it, good "how to use" manual for it. Fast charging, I use with 1800mh accumulators. Made from normal quality plastic material.

Charges up the batteries in good time. Works as intended.
The power cable could be a little bit longer since its a little short i have to run an extension so i can charge my batteries safelly on the table

Very good charger. Had no trouble so far. Very clear instructions on how to use. Charges very well and very fast. Very compact, so you can take it anywhere you go to. Charges LiPo and LiFe, so that comes in handy.

V3+ Charger for LiPo/LiFe 2S/3S . Well nothing much to say pretty decent charger. It server purpose. You have led indicator for charging and charged battery. It's really small and compact, doesn't heat up when charging batteries.

Really good bbs for a low price. The bbs are made out of one pice so they won't break in your barrel. They come in a bag but you don't need to fill them in somewhere else because you can fill them easy out of the bag in your speedloder.

Bought one and used it for charging the "Battery Li-Po 1450mAh 7.4V 20C".
Works like it should be.
When the battery is charged it will show a green light. charging won't costs that long of a time and it's balanced.
Price/quality is worth it!

I bought one of them. Simple and fit for purpose, this is my first charger. I'm charging him a 1450 battery. It will charge in about an hour. I haven't noticed any bugs yet. If it lasts a long time, I’ll definitely buy one or even more of it.

It fits under the dust cover of any rivetted VFC type AK (CM.045, BY-005, etc.) I've played 8-10 hour games with lots of full auto actions, but never had to use my spare battery. I have a strong M110 spring (380-390 fps) and a stock motor.